| Port details |
- gettext-lint Check the validity and consistency of PO and POT files
- 0.4_5 devel
 =3      0.4_5Version of this port present on the latest quarterly branch. - There is no maintainer for this port.
- Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
- Port Added: 2004-02-03 06:39:14
- Last Update: 2024-01-08 16:46:43
- Commit Hash: d6a45e9
- People watching this port, also watch:: aide, isc-cron, libssh, cops, gnupg1
- License: GPLv2
- WWW:
- https://gettext-lint.sourceforge.net/
- Description:
- The gettext lint tools is a collection of tools for checking the validity and
consistency of PO and POT files. It also includes an experimental glossary
building tool.
This package includes:
* POFileStatus - PO file validator and status reporting
* POFileChecker - searches for common mistakes in PO files
* POTFileChecker - searches for common mistakes in POT files
* POFileConsistency - PO file consistency checks
* POFileConsistencyShell - PO file consistency checks, interactive mode
* POFileEquiv - PO file glossary generator
All tools generate XML to the standard output; just run them with a list of PO
or POT files to check. Some have extra options, run the command with no
parameters for a short usage message.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- gettext-lint>0:devel/gettext-lint
- To install the port:
- cd /usr/ports/devel/gettext-lint/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/gettext-lint
- pkg install gettext-lint
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: gettext-lint
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (gettext-lint-0.4.tar.gz) = 0ddf463517cc8eb87afc127683040073edad47623be963e0fdd537a7c7b4ec68
SIZE (gettext-lint-0.4.tar.gz) = 148364
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Runtime dependencies:
-
- msgfmt : devel/gettext-tools
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- devel_gettext-lint
- USES:
- gettext-tools:run python:run shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.4_5
08 Jan 2024 16:46:43
 |
Baptiste Daroussin (bapt) |
MANPREFIX: eleminate its usage and move man to share/man |
0.4_4
01 Nov 2023 22:11:47
|
Rodrigo Osorio (rodrigo) |
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.4_4
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.4_4
20 Jul 2022 14:21:35
|
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
0.4_4
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.4_4
10 Apr 2019 06:18:32
 |
antoine |
Bump a few PORTREVISIONs after r498529
With hat: portmgr |
0.4_3
29 Nov 2014 18:22:33
|
tijl |
Split devel/gettext in devel/gettext-runtime and devel/gettext-tools. The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt. Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.
USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools. USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.
Update gettext to 0.19.3.
Remove :oldver from converters/libiconv and devel/gettext-runtime. Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports. When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.
Fix some ports that installed files in lib/locale instead of share/locale.
PR: 194038
Reviewed by: bapt
Exp-run: antoine
Approved by: portmgr (antoine) |
0.4_2
27 Oct 2014 10:10:59
|
bapt |
Cleanup plist |
0.4_2
20 Oct 2014 16:04:14
|
mva |
- Convert ports of devel/ to USES=python
Approved by: portmgr (implicit) |
0.4_2
31 Mar 2014 11:11:02
|
pawel |
- Add staging support
- Fix shebangs in two python scripts |
0.4_1
20 Sep 2013 17:04:44
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2) |
0.4_1
24 Apr 2013 13:36:19
|
ak |
- Convert USE_GETTEXT to USES (part 2)
Approved by: portmgr (bapt) |
0.4_1
08 Aug 2011 12:54:05
|
ehaupt |
- Add LICENSE
- Fix WWW: line
PR: 159431
Submitted by: KATO Tsuguru <tkato432@yahoo.com> |
0.4_1
02 Aug 2011 20:58:23
|
ehaupt |
Remove WWW entries from unmaintained ports that return 404 or where the domain
disappeared. |
0.4_1
03 Jul 2011 14:59:23
|
ohauer |
-remove MD5 |
0.4_1
15 Sep 2010 18:35:24
|
ade |
Autotools update. Read ports/UPDATING 20100915 for details.
Approved by: portmgr (for Mk/bsd.port.mk part)
Tested by: Multiple -exp runs |
0.4_1
22 Aug 2009 00:18:43
|
amdmi3 |
- Switch SourceForge ports to the new File Release System: categories starting
with D |
0.4_1
06 Jun 2008 13:21:59
|
edwin |
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav) |
0.4
01 Jun 2008 09:42:37
|
olgeni |
Large round of typo fixes in ports/devel (pkg-descr). |
0.4
26 Mar 2007 11:26:03
|
miwi |
- Update to 0.4
PR: 110814
Submitted by: KATO Tsuguru <tkato432@yahoo.com> |
0.3.1
04 May 2006 21:41:12
|
edwin |
Remove USE_REINPLACE from all categories starting with D |
0.3.1
24 Nov 2005 15:40:04
|
pav |
- Add some SHA256 checksums |
0.3.1
20 Feb 2005 16:45:42
|
pav |
- Update to 0.3.1
PR: ports/77770
Submitted by: Sam Lawrance <boris@brooknet.com.au> |
0.1.1
10 Apr 2004 16:07:10
|
trevor |
Trim whitespace. |
0.1.1
17 Mar 2004 18:29:46
|
trevor |
SIZEify. |
0.1.1
03 Feb 2004 06:37:57
|
ijliao |
add gettext-lint
Check the validity and consistency of PO and POT files |
As an Amazon Associate I earn from qualifying purchases.