This is GLib version 1.2. GLib, is a library which includes support
routines for C such as lists, trees, hashes, memory allocation, and
many other things.
WWW: https://www.gtk.org/ftp://ftp.gtk.org/pub/gtk
A mailing list is located at gtk-list@redhat.com for discussion.
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
didn't conflict with early development versions of glib/gtk 2.0
Rename old glib into glib12 to avoid confusion with glib (2.0) for binary users.
While here remove the now useless LATEST_LINK
Approved by: gnome (kwm)
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
Remove more tags from pkg-descr files fo the form:
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
getpw*_r is now implemented in -CURRENT. However, the _SC_GETPW_R_SIZE_MAX
sysconf is not. This causes glib to try and malloc UINT_MAX bytes of memeory
which basically translates to -1 bytes. Sanity check the value returned by
sysconf (_SC_GETPW_R_SIZE_MAX) to see that it's really implemented. This
fixes an abort people started to see in Glib-based applications.
Reported by: Shin-ichi YOSHIMOTO <yosimoto@waishi.jp>
Now that Glib 1.2 and GTK+ 1.2 are the only versions in the tree that use
the old xxx-config files, remove the "12" suffix. This will allow people
building Glib and GTK+ ports by hand to do so without a lot of extra
hacking. Since these ports are so heavily used, the xxx12-config files
aren't removed completely, but rather symlinked to their xxx-config
counterparts.
PR: 39417
GNOME has just changed the layout of their FTP site. This resulted in
making all the distfiles unfetachable. Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.
Fix another problem in the pkgconfig files for these ports. After running
a build of xscreensaver and xscreensaver-gnome, everything looks good.
Reported by: dougb
Fix up the pkg-{descr|comment} to relfect reality, and avoid confusion
for software developers.
Submitted by: Lawrence Mayer dsg <Lawrence.Mayer@dsg.ki.se>
Smash a compatibility bug in g_module_open(). It seems that unlike Linux one,
FreeBSD's dlopen(NULL, ...) doesn't return a handle useable for resolving
symbols in both the program itself and all modules it dlopen'ed. Instead, when
requested for a self handle return RTLD_DEFAULT, which seems closely matches
dlopen(NULL, ...) in Linux. Bump PORTREVISION.
Sigh. Think more carefully. Seems that any kind of circular dependency (port
A has *_DEPENDS on port B, and vice versa), causes make to go a little
strange[tm] on install, clean, even though the build succeeds.
Rework previous commit. Turns out that pkgconfig is not a build-time
dependency for glib12, so remove that, and put pkgconfig back to the way it
was before.
SWitch maintainership of core GNOME ports to a small group of committers
(gnome@FreeBSD.org), since this is now definitely too big for just one person.
