audio/opus: bump consumers after update to 1.4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Update a few GNUstep ports:

 * devel/gnustep-make: Update to 2.8.0
 * lang/gnustep-base: Update to 1.27.0
 * x11-toolkits/gnustep-back: update to 0.28.0
 * x11-toolkits/gnustep-gui: update to 0.28.0

Also bump PORTREVISION on dependent ports.

Return theraven's ports to the pool after safekeeping his commit bit.

Convert to UCL & cleanup pkg-message (categories d)

Move Objective-C ports to the v2 GNUstep ABI.

 * Bump the LLVM revision used for GNUstep to 7, the minimum to support
   the new ABI.
 * GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
   doesn't seem able to link Objective-C things).
 * Turn off some annoying debug logs in GNUstep back, which generate
   several messages per second when you move the mouse.  These should
   never have been enabled in a release build anyway.
 * Downgrade Cenon to 4.0.2.  This was the last version to actually work
   with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
   can't parse).
 * Update gorm to git head. The current release doesn't work with the
   new Objective-C ABI, but -head has the patches to fix it.
 * Update PikoPixel and add it to the gnustep-app meta-package.
 * Update the three core GNUstep packages to the latest release.
 * Update gnumail and pantomime to the latest release and fix a linking
   error with the new ABI.
 * Update GNUstep FTP to the latest version.

Reviewed by:	bapt (previous version)

Update Objective-C LLVM version to 6.0.

Fixes aarch64 build.  Reduces depends on obsolete LLVM 4.0.

PR:		230116
Submitted by:	mikael.urankar@gmail.com
Approved by:	theraven (prior version)
Sponsored by:	DARPA, AFRL

Fix configure options for gnustep-make

We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs.  This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.

Update GNUstep core libraries.

Update the default Objective-C compiler.

Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.

Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

Convert bsd.gnustep.mk to USES=gnustep

Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG

Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui

Merge deskutils/preferencepanes into deskutils/systempreferences

- Fix various distinfo errors
- Remove unused USE_* knobs
- Fix typos in USE_* knobs
- Remove empty lines after .include <bsd.port.mk>

Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D911

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)

Update to latest GNUstep core libraries.
Update dependent packages with more recent releases.
Remove old and bit-rotted ones.
Switch to using clang 3.3 and libobjc2 1.7 by default, so modern Objective-C
features work out of the box and remove a lot of configurable options for
sub-optimal (and, often, unsupported / deprecated upstream) configurations.
Take maintainership of GNUstep-related ports.

Several of the ports left in have scary warnings which mean that they are likely
broken in lots of cases.  Future commits will fix them.

Approved by:	bapt

Unbreak devel/gnustep

The problem with GNUStep is that most of the backends are slave ports with
nearly identical pkg-plists.  To properly fix, the slave port pkg-plists
need to be mutually exclusive.  This will take a bit of work.

In the meantime, the port can be unbroken by specifying a signal backend.
It makes the port lose effectiveness as a meta package, but at least it will
build now.  That's better than being broken.

PR:		181404
Approved by:	bapt/culot (mentors, implicit)

Maintainer has relinquished these ports.

PR:		ports/181404
Submitted by:	Chris Petrik <c.petrik.sosa@gmail.com> (maintainer)

Clarify why devel/gnustep is broken.

- Mark BROKEN fails to build

- Please welcome back Chris Petrik as maintainer of
  these ports [1]
- Trim headers
- Remove indefinite article from COMMENT
- Convert tab to space in WWW lines

PR:		ports/175415 [1]
Submitted by:	Chris Petrik <c.petrik.sosa@gmail.com> [1]
Discussed with:	bapt

- reset MAINTAINER

- update to 1.24.0

- update GNUSTEP_DEVEL to 1.22.0

- drop USE_GNUSTEP_PREFIX

- add option WITH_GNUSTEP_DEVEL to build version 1.21.0

- update to 1.19.1

- set NO_PACKAGE

- update to 1.18.0

- udpate stable to 1.16.3

- update to 1.16.3

- update to 1.16.2

- update to 1.16.0

- update to 1.14.4

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- add WITH_GNUSTEP_DEVEL

- update to 1.14.3

- update to 1.14.2

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- describe GNUstep.csh

- add category gnustep
PR:             103931
Approved by:    pav

- new option WITH_GNUSTEP_SINGLE_BACKEND

- use NO_INSTALL

- connect cairo backend

- update to 1.13.0

- add USE_GNUSTEP_PREFIX

- update to 1.12.0

- include xlib and libar backends.
  users can switch now between them at runtime.

- new option GNUSTEP_PREFIX
  allow user defined location of all files

- add quick readme to start gnustep apps

- update to 1.11.2

- update to 1.11.1

- update to 1.10.0

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- update to 1.10.2

- cleanup obsolete defs

- update to 1.10.0 (stable)

- update to 1.9.2

- update to 1.9.1

- Update to 1.9.0

- Update to 1.8.0

- file retired, new location ports/Mk/bsd.gnustep.mk

- Update to 1.7.3

- update to 1.7.2
- flat layout

Update to gnustep-1.7.1 / gui-8.7

- configure depended ports

- don't package ~/GNUSstep

- Add WITH_GNUSTEP_DEVEL
HEADS UP: New filesystem layout with gnustep-1.7.0

- Change WANT_GNUSTEP_* to WITH_GNUSTEP_*
Suggested by: kris

- use bsd.gnustep.mk
PR:             50479

- Cleanup

- Update to 1.6.0

- drop gnustep-objc in this meta package

- Update gnustep-base and gnutsep-make to 1.5.2

- retire pkg-comment

- add COMMENT

- Fix BUILD_DEPENDS to find correct port.

- Update to use gnustep-back instead of gnustep-xgps
- Sweep devel slave ports
- retire x11-toolkits/gnustep-xgps

Update Version

fix dependency

use SYSTEMDIR

use PKGNAMESUFFIX
add slave port gnustep-devel

support for gnustep-back, option GNUSTEP_GUI_DEVEL

Update to 1.5.0

bump Version to 1.4.0

- Take Maintainership
- use defined dirs consistently in each makefile

- Update metaport to 1.3.2

Upgrade to 1.3.0.

Track gnustep-base version (1.1.0).    

The category a port belongs in should be listed first in its   CATEGORIES.    

Don't depend on gnustep-guile.    

Fix path for COMBOLIBDIR.    

Add missing "\" at end of line (RUN_DEPENDS).    

This is now the mega port that installs the GNUstep stuff.   Set to version
1.0.2.    

Fix fennerism.    

Massive style enforcement - use ^I instead of spaces for variables identation.