non port: devel/jclassinfo/Makefile |
SVNWeb
|
Number of commits found: 24 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Wed, 22 Feb 2017
|
[ 15:02 bapt ] (Only the first 10 of 52 ports in this commit are shown above. )
Drop useless dependency on gmake (bmake build those fine)
|
Fri, 29 Aug 2014
|
[ 09:26 tijl ]
Convert to USES=libtool and add INSTALL_TARGET=install-strip
|
Tue, 21 Jan 2014
|
[ 00:06 bapt ]
Support stage
|
Fri, 20 Sep 2013
|
[ 17:04 bapt ] (Only the first 10 of 482 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)
|
Tue, 23 Apr 2013
|
[ 10:13 bapt ] (Only the first 10 of 97 ports in this commit are shown above. )
Convert devel to USES=pkgconfig
|
Tue, 19 Mar 2013
|
[ 13:04 eadler ] (Only the first 10 of 218 ports in this commit are shown above. )
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
|
Thu, 26 Jul 2012
|
[ 05:40 bapt ] (Only the first 10 of 158 ports in this commit are shown above. )
new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility
This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG
it can take the following arguments:
- yes (meaning build only dep)
- build (meaning build only dep)
- run (meaning run only dep)
- both (meaning run and build dep)
From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.
While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config
With Hat: portmgr
Exp-runs by: bapt (pointhat-west), beat (pointyhat)
|
Wed, 25 Jul 2012
|
[ 06:32 cs ] (Only the first 10 of 125 ports in this commit are shown above. )
Fix typos in COMMENT
|
Mon, 23 Jul 2012
|
[ 01:33 dougb ] (Only the first 10 of 45 ports in this commit are shown above. )
For ports maintained by ports@ where pkgconfig is one of the USE_GNOME deps
convert it to BUILD_DEPENDS. This avoids the problem of the bogus run dep
added by bsd.gnome.mk.
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
Sat, 22 Aug 2009
|
[ 00:18 amdmi3 ] (Only the first 10 of 417 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with D
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Thu, 20 Mar 2008
|
[ 09:37 pav ] (Only the first 10 of 35 ports in this commit are shown above. )
- Remove USE_GETOPT_LONG which is a no-op since March 200
|
Sun, 28 Jan 2007
|
[ 09:07 kris ] (Only the first 10 of 103 ports in this commit are shown above. )
Use libtool port instead of included one to avoid objformat a.out botch
|
Mon, 14 Aug 2006
|
[ 22:55 clsung ] (Only the first 10 of 102 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
Thu, 13 Jul 2006
|
[ 03:13 rafan ]
- Update to 0.19.1
- Define INSTALLS_SHLIB
|
Thu, 4 May 2006
|
[ 21:41 edwin ] (Only the first 10 of 364 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with D
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
Tue, 1 Mar 2005
|
[ 19:23 vs ] (Only the first 10 of 14 ports in this commit are shown above. )
Remove some patches in favour of USE_LIBTOOL_VER=15
|
Wed, 5 May 2004
|
[ 01:41 ijliao ]
add jclassinfo 0.19
Shows information about Java class, dependencies and more
|
Number of commits found: 24 |