notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
non port: devel/libffi/Makefile
SVNWeb

Number of commits found: 43

Tue, 6 Apr 2021
[ 14:31 mat (Mathieu Arnold) ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148 (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Thu, 20 Aug 2020
[ 11:34 zeising ] Original commit   Revision:545530
devel/libffi: Fix build on i386 without objdump

FreeBSD 13 does not have any objdump in the default installation, which
causes issues with libffi on i386 with the recent update to llvm 11.
Add a patch originally from upstream, to use readelf instead of objdump.

The patch is for configure.ac originally.  I've applied it and rerun
autoreconf and committed the result, instead of adding a dependency on
autoreconf.

Fix devel/libffi321 in the same way.  While here, fix the fuzz on a few
other patches, which made it much easier to sort out the configure patch.

Thanks to dim@ for helping me figure out the issue.

MFH:		2020Q3
Tue, 21 Jul 2020
[ 08:21 pkubaj ] Original commit   Revision:542724
devel/libffi: fix build on powerpc

Problem:
In file included from src/powerpc/ffi.c:33:
src/powerpc/ffi_powerpc.h:65:9: error: '__int128' is not supported on this
target
   65 | typedef __int128 float128;
      |         ^~~~~~~~
Sat, 4 Jul 2020
[ 22:15 pkubaj ] Original commit   Revision:541239
devel/libffi: fix build on GCC architectures

Use newer GCC:
../src/powerpc/ffi_powerpc.h:65: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'float128'
[ 18:09 zeising ] Original commit   Revision:541231
devel/libffi: Update to 3.3.0

Update devel/libffi to 3.3.0
This adds support for RISC-V
Changelog:
https://github.com/libffi/libffi/releases/tag/v3.3

PR:		247028 (exp-run)
Reviewed by:	kp, linimon, arrowd
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D25163
Sat, 10 Nov 2018
[ 18:12 bapt ] Original commit   Revision:484628(Only the first 10 of 386 ports in this commit are shown above. View all ports for this commit)
Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816
Mon, 18 Dec 2017
[ 17:48 dim ] Original commit   Revision:456663
Apply upstream change from libffi to check for HAVE_AS_X86_PCREL for all
x86 targets.  This should eliminate any text relocations, in particular
for the i386 build, making it possible to build the port with lld
without having to use -z notext.

Obtained from:	https://github.com/libffi/libffi/pull/174
Approved by:	zeising (maintainer)
PR:		214864
MFH:		2017Q4
Tue, 22 Aug 2017
[ 21:14 antoine ] Original commit   Revision:448582
- Remove nonsense TESTS option
- Use the framework for regression tests

With hat:	portmgr
Fri, 1 Apr 2016
[ 14:00 mat ] Original commit   Revision:412346(Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Thu, 14 May 2015
[ 10:15 mat ] Original commit   Revision:386312(Only the first 10 of 1814 ports in this commit are shown above. View all ports for this commit)
MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight
Mon, 5 Jan 2015
[ 11:50 sbruno ] Original commit   Revision:376293
Update libffi to 3.2.1
- Add LICENSE_FILE
- Use OPTIONS helpers
- Backport: Fix for testsuite using clang [1]
- Backport: Fix build with Clang 3.5 on ARM [2]

PR:		196408
Submitted by:	koobs
Approved by:	mentor (implicit)
Relnotes:	yes
Wed, 29 Oct 2014
[ 15:31 sbruno ] Original commit   Revision:371681
Add support for mips/mips64 targets.

Unblocks 7k ports building for these targets.

PR:		191909
Submitted by:	sson
Reviewed by:	bapt (mentor)
Mon, 1 Sep 2014
[ 19:56 tijl ] Original commit   Revision:366947
- Add USES=libtool
- Use MAKE_CMD
Sun, 29 Dec 2013
[ 14:58 tijl ] Original commit   Revision:338001
Remove pkgconfig dependency.  The port only installs a .pc file.
Sat, 21 Dec 2013
[ 05:22 koobs ] Original commit   Revision:337118
devel/libffi: Fix abort() on ARM related to __clear_cache()

The current FreeBSD/ARM __clear_cache() implementation does nothing #if
__i386__ || __x86_64__ #else abort();

cognet@ advises this is an issue for anything !Apple that is using the
libcompiler_rt provided by Clang on ARM, and requires upstreaming.

Additionally, two Python ports (python26 and python31) use devel/libffi for
unrelated reasons, so this addresses the related PR for those ports too [2].

- Enable STAGE support
- Remove MAN* entries and update pkg-plist accordingly
- Add LICENSE
- Sort USE/USES section
- Use install-strip as the INSTALL_TARGET

PR:		ports/149167
PR:		ports/184517 [2]
Approved by:	maintainer timeout (2 weeks)
Fri, 20 Sep 2013
[ 17:13 bapt ] Original commit   Revision:327724(Only the first 10 of 2998 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
Tue, 23 Apr 2013
[ 10:13 bapt ] Original commit   Revision:316333(Only the first 10 of 97 ports in this commit are shown above. View all ports for this commit)
Convert devel to USES=pkgconfig
Thu, 21 Mar 2013
[ 12:01 zeising ] Original commit   Revision:314838
Update to 3.0.13
Tue, 19 Mar 2013
[ 13:04 eadler ] Original commit   Revision:314640(Only the first 10 of 218 ports in this commit are shown above. View all ports for this commit)
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)
Fri, 8 Mar 2013
[ 12:59 zeising ] Original commit   Revision:313643
Grab
Sun, 3 Mar 2013
[ 10:27 koobs ] Original commit   Revision:313337
- Update to 3.0.12
- Remove patches that were included upstream
- Rename TEST option to TESTS
- Add TEST_DEPENDS & regression-test: target
- Remove post-build: so tests dont run unconditionally

Approved by:	eadler
Discussed with:	kwm, milki, flo, pgj
Tue, 29 Jan 2013
[ 01:18 jkim ] Original commit   Revision:311144
- Use SOURCEWARE master sites.
- Use make for regression test.
- Tidy up and make portlint happy.
[ 00:35 jkim ] Original commit   Revision:311141(Only the first 10 of 16 ports in this commit are shown above. View all ports for this commit)
- Update devel/libffi to 3.0.11.
- Reset maintainership for libffi.  See ports/164941.

PR:		ports/171768
Submitted by:	Takefu <takefu@airport.fm>
Wed, 9 Nov 2011
[ 15:26 miwi ] Original commit (Only the first 10 of 250 ports in this commit are shown above. View all ports for this commit)
- Remove WITH_FBSD10_FIX, is no longer needed
Fri, 28 Oct 2011
[ 17:18 miwi ] Original commit 
- Fix build on FreeBSD 10
Thu, 11 Aug 2011
[ 19:20 kwm ] Original commit (Only the first 10 of 543 ports in this commit are shown above. View all ports for this commit)
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Tue, 5 Jan 2010
[ 01:35 pgollucci ] Original commit 
- Update to 3.0.9

PR:             ports/142237
Submitted by:   Björn König <bkoenig@alpha-tierchen.de>
Thu, 15 Jan 2009
[ 19:33 amdmi3 ] Original commit 
- Update to 3.0.8.

PR:             130591
Submitted by:   Björn König <bkoenig at alpha-tierchen dot de>
(maintainer)
Fri, 14 Nov 2008
[ 08:36 daichi ] Original commit 
- Update to 3.0.7
    o Fix for FreeBSD/ppc (Thanks to Andreas Tobler)

PR:             ports/128863
Submitted by:   bkoenig@alpha-tierchen.de (maintainer)
Wed, 22 Oct 2008
[ 07:31 stefan ] Original commit 
- Update to 3.0.6.
- Add symlinks for include files in ${PREFIX}/include.

PR:             127552
Submitted by:   Gea-Suan Lin <gslin@gslin.org>
Patch by:       maintainer
Fri, 4 Apr 2008
[ 13:09 pav ] Original commit 
- Add dependency on pkg-config
[ 12:59 pav ] Original commit 
- Update to 3.0.4

PR:             ports/122398
Submitted by:   Bjoern Koenig <bkoenig@alpha-tierchen.de> (maintainer)
Thu, 21 Feb 2008
[ 09:07 beech ] Original commit 
- Update to 3.0.1
- Pass maintainership to submitter

PR:             ports/120736
Submitted by:   Bjorn Konig <bkoenig@alpha-tierchen.de>
Approved by:    Horance Chou <horance@freera.net> (maintainer)
Thu, 23 Feb 2006
[ 10:40 ade ] Original commit (Only the first 10 of 2514 ports in this commit are shown above. View all ports for this commit)
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
Tue, 15 Nov 2005
[ 06:52 ade ] Original commit (Only the first 10 of 1438 ports in this commit are shown above. View all ports for this commit)
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
Sat, 2 Apr 2005
[ 19:37 thierry ] Original commit 
- register conflict with lang/gcc3* ;

- change maintainer's address.

PR:             ports/79294
Submitted by:   Horance Chou (maintainer)
Fri, 9 Jul 2004
[ 17:43 marcus ] Original commit (Only the first 10 of 489 ports in this commit are shown above. View all ports for this commit)
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet
Sun, 14 Mar 2004
[ 06:17 ade ] Original commit (Only the first 10 of 945 ports in this commit are shown above. View all ports for this commit)
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Fri, 5 Mar 2004
[ 08:36 kris ] Original commit 
BROKEN: Configure fails on !i386 and !alpha
Fri, 21 Feb 2003
[ 11:23 knu ] Original commit (Only the first 10 of 422 ports in this commit are shown above. View all ports for this commit)
De-pkg-comment.
Thu, 24 Oct 2002
[ 07:20 kevlo ] Original commit 
Update MASTER_SITES and add WWW.

PR: 44427
Submitted by: MAINTAINER
Fri, 16 Jun 2000
[ 22:52 asami ] Original commit (Only the first 10 of 264 ports in this commit are shown above. View all ports for this commit)
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    
[ 09:48 sobomax ] Original commit (Only the first 10 of 181 ports in this commit are shown above. View all ports for this commit)
Fourth round of INSTALLS_SHLIBS conversion.    

Number of commits found: 43