Number of commits found XX: 101 (showing only 100 on this page)

1 | 2  »  

Update to 2.40.0

Fix build on 13-CURRENT >= 1300062

Changes to the virtual memory subsystem in 13.0-CURRENT r355491 has changed
the API, as it is no longer a circular array. This broke the devel/libgtop
port on these systems.

Submitted by:	Neel Chauhan <neel AT neelc DOT org> (based on patch by dougm)
Reviewed by:	koobs
Differential Revision:	https://reviews.freebsd.org/D22929

Add USES=xorg USES=gl, ports categories d

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'd'.

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.

The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/

Thanks to Antoine Brodin for running the exp-runs.

PR:		229761

Mark as broken on aarch64: fails to link with sbrk.

While here, pet portlint and remove stale ia64 lines.

Approved by:	portmgr (tier-2 blanket)

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

Update libgtop2 to 2.31.90.

Use single command for libgtop_server2 premissions in the plist.

Obtained from:	gnome devel repo

Add gtk-doc annotations for the glibtop_init functions. Their return value
should not be freed. This fixes usage from gnome-instrospection (invalid free).

Submitted by:	Ting-Wei Lan
Obtained from:	upstream libgtop git 598764c

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

(Only the first 15 lines of the commit message are shown above )

These compiler flags are not needed after r371082.

Sponsored by:	Nginx, Inc.

Remove obsolete post-configure ${TOUCH} [1].

Due to touch switching to nano precision in the timestamp, not all the
  files that where touched in the post-configure step ended up with the
  same timestamp. The result is that the build system tried to
  rerun autotools in the build stage.
Add makeinfo to USES to fix the build on CURRENT, persumely due the above
  change but I'm not sure..

PR:		197754 [1]
Reported by:	lattera@gmail.com and on IRC

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

(Only the first 15 lines of the commit message are shown above )

- Fix build on head [1]
- Fix displaying of MAC address [2]

PR:		ports/194187
Submitted by:	glebius [1], self [2]
Tested with:	gnome-nettool

Convert to USES=libtool and INSTALL_TARGET=install-strip

Obtained from:	gnome-dev

Convert a bunch of USE_XZ to USES=tar:xz.

Approved by:	portmgr (not really, but touches unstaged ports)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

(Only the first 15 lines of the commit message are shown above )

Support stage.

Submitted by:	danilo@

Fix build on 11.0-CURRENT.

PR:		ports/183083
Submitted by:	sergio <lenzi.sergio@gmail.com>

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

The FreeBSD GNOME team presents a Glib and Gtk+ 3 update.

This update updates Glib20 to 2.36 and Gtk+ 3.8

* The gio-fam-backend port that used gamin for the GFileMonitor API is gone.
  It is replaced by a GIO kqueue implementation developed as part of a NetBSD
  GSoC 2011 project by Dimitry Matveev.
* Fix a bug in the glib20 Makefile so it includes -lintl in the glib-2.0
  pkgconfig file [1]. This broke static linking and newer binutils.
* Add introspection USE_GNOME component which sets GI_SCANNER_DISABLE_CACHE to
  prevent creation of /  root/.cache dir. Defaults to build & run depend,
  but :build and :run switches available.
* New x11-toolkits/pangox-compat port and companion USE_GNOME component for
  pangox support which was removed from the pango port. Add it to ports still
  using pangox API.

Exp-run by:	bapt@
PR:		ports/178958 [1]
Submitted by:	emaste@ [1]

This port needs pkg-config

Submitted by:	xorg exp run

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- Dirrmtry gir directories

Reported by:    pointyhat
Approved by:    gnome (kwm)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Depend on libXau via the USE_XORG framework.

Submitted by:   pointyhat via pav.

Update to 2.28.3.

Sync to new bsd.autotools.mk

Update to 2.28.2.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

(Only the first 15 lines of the commit message are shown above )

Fix some bogus errors in the FreeBSD backend, and remove all compiler warnings.

Fix inode retrieval in FreeBSD 8.0+.

Reported by:    mezz

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

(Only the first 15 lines of the commit message are shown above )

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Presenting GNOME 2.26.1 for FreeBSD.

Approved by:    portmgr (marcus)

Fix an issue with accessing a bad memory address in my previous patch.
I had the correct code locally, but I committed the bad version.  Without
this, libgtop would crash.

Approved by:    portmgr (implicit)

Add support for per-CPU utilization stats.

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Update to 2.24.4.

Update to 2.24.3.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

(Only the first 15 lines of the commit message are shown above )

- Remove conditional checks for FreeBSD 5.x and older

Switch libgtop to use kinfo_getfile() to get open file and cwd information.

Update to 2.22.3.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 2.22.2.

Use procstat on sufficiently new versions of RELENG_7.

Update to 2.22.1.

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Chase the updated SHM ABI changes to allow libgtop to report more than
2 GB of SHM on 64-bit architectures.

Reported by:    csjp

Update to 2.20.1.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Update to 2.14.9.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.14.8 which includes a major refactoring of the FreeBSD backend.

Update to 2.14.6.

Update to 2.14.5.

Add the "cpu model" property to the sysinfo list.

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

(Only the first 15 lines of the commit message are shown above )

Update to 2.14.4.

Update to 2.14.3.

Add a missing dependency on intlhack.

Update to 2.14.2.

devel/libgtop2 -> devel/libgtop

Rename this ports to use the real vendor package name. The advantage of this
is to allow our users' keyword search works and easier for users to file the
Bugzilla report when they use our name of ports. Debian, Gentoo, NetBSD and
other OSs have the correct package name, but not in our ports tree.

My team, FreeBSD GNOME Team, have agreed with it.

As for other ports, chase the rename.

Remove libgtop and its dependents.  LibGTop is obsolete, and no longer
builds on new architectures.  LibGTop2 is the actively maintained port that
is GLib-2 based.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Use INFO.

Re-add libgtop.  It should not have been deleted in this phase of the GNOME 1.4
removal.

Begin the de-orbit burn of the GNOME 1.4 desktop.  This is phase I.  All
core desktop components are being removed.

Remove REINPLACE commands that were rolled into gnomehack.

Chase guile's shared lib version.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Do not die if libgtop encounters a different OS version than the one on which
it was compiled.  Instead, warn the user, and keep on going.

Submitted by:   Thomas E. Zander <riggs@rrr.de>

Backport the kernel memory dereference patch from libgtop2.

Fix build on -CURRENT by moving to a pure libkvm API.  Thanks to julian for
pointing me in this direction.  This should hopefully be more portable
moving forward.  Bump PORTREVISION since the changes affect -stable as well.

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

MFlibgtop2: Fix swap size calculation by multiplying by PAGE_SIZE.

Use USE_REINPLACE.

Chase guile shared lib number.

Prompted by:    Mike Harding <mvh@ix.netcom.com>

Update to 1.0.13.    

Patch from vendor.  From the ChangeLog:    

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

Update to GNOME 1.4 -- massive changes all around, for the sake of   CVS repo
bloat, I'll only list the updates.    

-pthread --> ${PTHREAD_LIBS}   -D_THREAD_SAFE --> ${PTHREAD_CFLAGS}    

Update to 1.0.11   Unbreak (again) for -current (from knu)    

Unbreak patch-aj for 4.x systems (*slap*)    

Make libgtop compile on -current again after the recent   kinfo_proc changes. 
It seems to do the right thing on my laptop,   but confirmations from others
would be appreciated.    

struct mount was hidden from userland on -current a short while ago    

Update to 1.0.10    

Implement USE_GNOME, part 1.    

Re-sobomize to use pre-patch instead of post-extract    

Extensive patchfile cleanups using sobomax's wonderful   post-extract rule    

(1) /usr/share/info/dir was renamed to dir-tmpl.   (2) Now it is not necessary
to exist a file "info/dir"   when install-info is executed.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fourth round of INSTALLS_SHLIBS conversion.    

Number of commits found XX: 101 (showing only 100 on this page)

1 | 2  »  

18 vulnerabilities affecting 82 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-07-10 06:33:27