non port: devel/libsigrokdecode/Makefile |
SVNWeb
|
Number of commits found: 23 |
Tue, 27 Jun 2023
|
[ 19:34 Rene Ladan (rene) ] 3d9a815 (Only the first 10 of 4481 ports in this commit are shown above. )
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Mon, 6 Jun 2022
|
[ 11:48 Muhammad Moinur Rahman (bofh) ] ca473fb (Only the first 10 of 12 ports in this commit are shown above. )
all: Take maintainership
|
[ 11:19 Rene Ladan (rene) ] 65e2c3c (Only the first 10 of 28 ports in this commit are shown above. )
all: return bsam's ports to the pool after his commit bit got safekept
|
Sat, 26 Mar 2022
|
[ 09:24 Thierry Thomas (thierry) ] ec88d48
devel/libsigrokdecode: support Python-3.9
PR: 262305
Approved by: maintainer’s time-out
|
Tue, 22 Mar 2022
|
[ 17:18 Dmitry Marakasov (amdmi3) ] 99f34a6
devel/libsigrokdecode: fix build with python3.9+
- Fix python detection and allow build with python3.9+
- Fix license, add LICENSE_FILE
Approved by: portmgr blanket
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Thu, 12 Dec 2019
|
[ 20:26 bsam ]
devel/libsigrokdecode: Update to version 0.5.3
|
Fri, 8 Nov 2019
|
[ 11:39 tobik ] (Only the first 10 of 109 ports in this commit are shown above. )
devel: Add missing USES={gl,gnome,php,sdl}
|
Thu, 13 Sep 2018
|
[ 22:36 bsam ]
devel/libsigrokdecode: Update to version 0.5.2.
From the announcement at the site:
-----
This is a "minor" release that doesn't change or remove any existing public
API functions, so all existing clients will continue to work (without even
the need to recompile).
The following new protocol decoders are now available:
mcs48: Intel MCS-48 external memory access protocol
st7735: Sitronix ST7735 TFT controller protocol
atsha204a: Microchip ATSHA204A CryptoAuthentication device
cfp: 100 Gigabit C form-factor pluggable (CFP) protocol
jtag_ejtag: MIPS EJTAG protocol
swim: STM8 Single Wire Interface Module (SWIM) protocol
cec: HDMI Consumer Electronics Control (CEC) protocol
miller: Miller encoding protocol
ook: On-off keying protocol
ook_oregon: Oregon Scientific weather sensor protocol
ook_vis: OOK visualisation in various formats
In total, we now support 93 different protocol decoders.
-----
|
Sun, 15 Apr 2018
|
[ 19:45 bsam ]
devel/libsigrokdecode: Update to version 0.5.1
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
Wed, 11 Oct 2017
|
[ 21:46 bsam ]
devel/libsigrokdecode: Update to version 0.5.0.
|
Wed, 22 Feb 2017
|
[ 15:02 bapt ] (Only the first 10 of 52 ports in this commit are shown above. )
Drop useless dependency on gmake (bmake build those fine)
|
Mon, 9 Jan 2017
|
[ 13:16 amdmi3 ] (Only the first 10 of 104 ports in this commit are shown above. )
- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL
Approved by: portmgr blanket
|
Sun, 9 Oct 2016
|
[ 21:25 bsam ]
Take maintainership.
Approved by: Uffe Jakobsen <uffe@uffe.org> (maintainer, via e-mail)
|
Sat, 10 Jan 2015
|
[ 23:15 demon ] (Only the first 10 of 39 ports in this commit are shown above. )
Switch default python3 version from 3.3 to 3.4.
Bump PORTREVISIONs for the affected ports.
Exp-run by: antoine
|
Mon, 6 Oct 2014
|
[ 17:40 antoine ]
Unbreak on head and 10.1
|
Mon, 28 Jul 2014
|
[ 23:06 wg ]
devel/libsigrokdecode: update to 0.3.0
PR: 192153
Submitted by: maintainer (based on)
|
Mon, 14 Apr 2014
|
[ 18:14 antoine ]
Undeprecate by depending on any version of python 3 rather than deprecated
python 3.1
PR: ports/187394
Approved by: maintainer timeout (1 month)
|
Sat, 1 Mar 2014
|
[ 13:35 antoine ]
Chase lang/python31 expiration
|
Tue, 31 Dec 2013
|
[ 07:01 jgh ]
The sigrok project aims at creating a portable, cross-platform,
Free/Libre/Open-Source signal analysis software suite that supports
various device types, such as logic analyzers, MSOs, oscilloscopes,
multimeters, LCR meters, sound level meters, thermometers,
hygrometers, anemometers, light meters, DAQs, dataloggers,
function generators, spectrum analyzers, power supplies,
GPIB interfaces, and more.
WWW: http://sigrok.org/
PR: ports/179852
Submitted by: Uffe Jakobsen <uffe@uffe.org>
|
Number of commits found: 23 |