devel/libukcprog: Move man pages to share/man

Approved by:	portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

Deorbit RESTRICTED && NO_CDROM, part two.

Move ports to the licenses framework.

RESTRICTED → auto-accept (unless expressly stated otherwise)
NO_CDROM → dist-mirror pkg-mirror auto-accept

Differential Revision:  https://reviews.freebsd.org/D30010

Remove # $FreeBSD$ from Makefiles.

- Update WWW

Approved by:	portmgr blanket

Use ftp.mirrorservice.org instead of ftp.uk.i-scream.org.

% host ftp.uk.i-scream.org
ftp.uk.i-scream.org is an alias for ftp.mirrorservice.org.

Remove ftp://ftp.i-scream.org/ master site. The http equivalent still
exists. Also remove DIST_SUBDIR where there's no need to have it.

Convert to USES=libtool.

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

Eradicate USE_GNOME=pkgconfig from devel
While here:
USE_GMAKE->USES=gmake
USE_GNOME=gnomehack->USES=pathfix
USE_PERL5*->USES=perl5

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

Sync to new bsd.autotools.mk

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- The license for this package (see the top of the source files) states:

    /*  Copyright 1991 Mark Russell, University of Kent at Canterbury.
     *
     *  You can do what you like with this source code as long as
     *  you don't try to make money out of it and you include an
     *  unaltered copy of this message (including the copyright).
     */

  Therefore this port must be marked as NO_CDROM.

- Also update the mirror sites.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Use libtool port instead of included one to avoid objformat a.out botch

Fix MASTER_SITES.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Change maintainer to my @FreeBSD.org address.
- Add SHA256 checksum.

Approved by:    clement (mentor)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Update MASTER_SITES

PR:             ports/70919
Submitted by:   maintainer

Fix MASTER_SITES

PR:             ports/69432
Submitted by:   maintainer

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Fix dependencies

PR:             ports/66055
Submitted by:   maintainer

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

- Use SIZE

PR:             ports/62483
Submitted by:   Tim Bishop <tim@bishnet.net> (maintainer)

- Tarball was rerolled to fix a packaging issue with the
  pkgconfig file.
- Use 'gnomehack'
- Do not install useless *.la
- Bump PORTREVISION

PR:             58259
Submitted by:   maintainer

- Fix package build

Submitted by:   kris via bento

- Update to version 1.0.2

PR:             57831
Submitted by:   maintainer

- Add new MASTER_SITES

PR:             56199
Submitted by:   maintainer

- Update to version 1.0.1

PR:             55878
Submitted by:   maintainer

Add libukcprog 1.0, generally useful low level routines.

PR:             51722
Submitted by:   Tim Bishop <tim@bishnet.net>