Number of commits found XX: 85

devel/libvirt: update to 6.10.0

devel/libvirt: update to 6.9.0

devel/libvirt: update to 6.8.0

devel/libvirt: update to 6.7.0

One of the major changes in this update is switching
to the Meson build system.

devel/libvirt: update to 6.6.0

devel/libvirt: update to 6.5.0

devel/libvirt: update to 6.4.0

devel/libvirt: update to 6.2.0

 - Update to 6.2.0
 - Remove GNUTLS option as now it's a strong requirement
 - rst2html is now required for build
 - Pull upstream patch that fixes libvirtd exit code so
   rc script works properly

devel/libvirt: update to 5.8.0

devel/libvirt: update to 5.7.0

With this release, libvirt has separated libvirtd into per-driver daemons.
The older way of using all in one libvirtd binary is still supported, and
the port still uses it. It'll be converted to the new schema later.

devel/libvirt: update to 5.6.0

devel/libvirt: update to 5.5.0

devel/libvirt: update to 5.3.0

devel/libvirt: update to 5.2.0

devel/libvirt: update to 5.1.0

 - Update to 5.1.0
 - Switch to update to date sysutils/xen-tools port for XEN

devel/libvirt: update to 5.0.0

devel/libvirt: update to 4.9.0

devel/libvirt: update to 4.7.0

Libvirt has moved back from jansson to yajl, so update dependencies accordingly.

devel/libvirt: fix build with QEMU enabled

Libvirt has switched from yajl to jansson for JSON parsing,
so update dependencies accordingly. Also add some missing
directories to plist.

Bump PORTREVISION.

PR:		230583 (based on)
Submitted by:	hashiz@meridiani.jp

devel/libvirt: update to 4.5.0

devel/libvirt: update to 4.4.0

devel/libvirt: update to 4.3.0

 - Update to 4.3.0,
 - Chase a change in libintl detection by removing no longer functional
   '--with-libintl-prefix' configure flag and setting CFLAGS appropriately,
 - Remove trailing whitespace from pkg-plist [1],
 - Update website [1].

PR:		227883 [1]
Submitted by:	0mp [1]

devel/libvirt: update to 4.2.0

 - update to 4.2.0,
 - python build scripts now support python3, so remove '2.7' restriction,
 - remove patches included upstream.

devel/libvirt: update to 4.0.0

devel/libvirt: update to 3.10.0

 - update to 3.10.0;
 - remove hard-coded dependency on libssh2, instead add LIBSSH and LIBSSH2
   options, both enabled by default;
 - add 'gettext-runtime' to USES to fix build without NLS.

devel/libvirt: update to 3.7.0

devel/libvirt: update to 3.4.0

devel/libvirt: update to 3.3.0

 - update to 3.3.0
 - switch from emulators/qemu-devel to emulators/qemu as the former
   is newer now
 - add python:build and shebangfix to USES as now Python
   scripts are used during the build

devel/libvirt: update to 3.2.0

 - Add new plist entries for the new bhyve.conf configuration
   file
 - Remove '--without-storage-scsi' that doesn't work on FreeBSD
   as it's now automatically disabled by configure

devel/libvirt: update to 3.1.0

 - update to 3.1.0
 - disable scsi storage driver: it builds fine, but will
   not work on FreeBSD
 - Add an OPTION for the ZFS storage driver (enabled by default)

devel/libvirt: update to 2.5.0

devel/libvirt: update to 2.3.0

devel/libvirt: update to 2.0.0

devel/libvirt: update to 1.3.5

 - update to 1.3.5
 - drop the *.syms file as it's properly included in the tarball now
 - drop some --without-* flags from CONFIGURE_ARGS for those which feature
   probing improved upstream (so we don't have Linux specific features
   automatically enabled)
 - add a link to the official documentation for bhyve users

devel/libvirt: update to 1.3.4

devel/libvirt: update to 1.3.3

Add NSS option to enable the nsswitch plugin (disabled by default).

devel/libvirt: update to 1.3.2

devel/libvirt: version update and security fix

- update to 1.3.0
- add fix for CVE-2015-5313
- improve sample file renaming to do that by moving files
  in post-install rather than patching Makefiles
- add an rc script for the new virtlogd daemon. It is required
  for the qemu driver if you have stdio_handler = "logd" in
  qemu.conf (default)

Security:	CVE-2015-5313

devel/libvirt: fix BHYVE option

 - Drop OSVERSION check that's always true because of incorrect
   version value
 - Fix plist when BHYVE option is disabled on systems where it's
   available

While here, clean up trailing whitespace.

Differential Revision:	D4109

devel/libvirt: update to 1.2.21

devel/libvirt: improve configuration handling

libvirt stores various configuration objects in XML files and
also uses symlinks to enable/disable various things. While
using @sample could prevent from touching user-modified configs,
it is quite cumbersome to preserve state of enabled or disabled
symlink controlled objects across reinstall.

In order to address this situation:

 * Install these configuration files into %%EXAMPLESDIR%%,
 * Update pkg-message with instructions how to apply the
   default configuration if user wants to. Also, pkg-message
   moved to files/pkg-message.in to allow substitution,
 * While here, convert virtlockd.conf to @sample
 * Bump PORTREVISION

PR:			203865
Differential Revision:	D3938

Add XEN option that enables the libxl hypervisor driver.

PR:		203202
Approved by:	jgh (maintainer)

- update to devel/libvirt [1] and devel/py-libvirt to 1.2.19

http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/tags/v1.2.19

PR:		202839 [1]
Submitted by:	novel@ [1]

- update devel/libvirt and devel/py-libvirt to 1.2.17
- update devel/libvirt-glib to 0.2.2

http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/tags/v1.2.17

- update devel/libvirt and devel/py-libvirt to 1.2.16

http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/tags/v1.2.16

- update to devel/libvirt and devel/py-libvirt to 1.2.14

http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/tags/v1.2.14

Replace all those @unexec rmdir by proper @dir

- update to devel/libvirt and devel/py-libvirt to 1.2.13

http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/tags/v1.2.13

- fix build failures on 8/9 (bhyve)

Reported by:	mat@

- update to devel/libvirt and devel/py-libvirt to 1.2.11

http://libvirt.org/git/?p=libvirt.git;a=shortlog;h=refs/tags/v1.2.11

- fix packaging list for libvirt
- update py-libvirt to 1.2.10

- update libvirt,py-libvirt,libvirt-glib to 0.1.9
- shift var from ${PREFIX} to /var
- bump shared libs of dep. port

PR:		192441 (based on)
Submitted by:	olevole@olevole.ru

Cleanup plist

security/libssh2:
- Convert to USES=libtool and USES=pathfix
- Add INSTALL_TARGET=install-strip
- Only depend on openssl if GCRYPT option is off
- Sanitize libssh2.pc

devel/libvirt:
- Remove workaround for broken libssh2.pc
- Add USES=libtool and bump dependent ports
- Convert to INSTALL_TARGET=install-strip

devel/libvirt-glib:
- Convert to USES=libtool

Approved by:	portmgr (implicit, bump unstaged port)

- update to 1.2.6
- Make sure not to build uml driver as it's useless on FreeBSD
- Enable bhyve by default on 10.0 and newer on amd64
- Fix sample config handling to work with staging
- Fix bhyve detection in the configure script
- Add a patch to fix segfaults in case of problems with bridge
  creation
- Enable networking port and install default networking definition;
  add dnsmasq dependency for that

PR:		190767
PR:		190783
Submitted by:	rodrigc@, roman@

- update to 1.2.4

Changelog:	http://libvirt.org/news.html

- adjust package listing

Spotted by:	swills

- update to 1.2.3
- support bhyve [1]

PR:	187584 (based on)
Submitted by:	xmj@chaot.net
Changes:	http://libvirt.org/news.html

- update libvirt to 1.2.2
  - fix qemu when not enabled, and disable linux containers [1]
- update libvirt-glib to 0.1.8

Changes:	http://libvirt.org/news.html
Submitted by:	roman@ [1]

- update to 1.2.0 and bump shared libraries in respective ports
- while here shift new lib_depends format where needed

Changes:	http://libvirt.org/news.html

- update to 1.1.3
- support staging

Changes: http://libvirt.org/news.html

- update to 1.1.2
- move to new lib_depends format
- shift perl build inclusion to USES framework
- fix formatting of pkg-descr

Note: this should fix building on CURRENT

Changes:	http://www.libvirt.org/news.html

- update to 1.1.1
- workaround for pkg-config (thanks bapt@!)

Changes:	http://libvirt.org/news.html

- fix plist

Reported by:	pkg (DEVELOPER_MODE)

- bring in distinfo and pkg-plist for bump

- update to 1.0.6
- pkg-plist cleanup

Changes:	http://www.libvirt.org/news.html

- update to 1.0.5

Changes: http://libvirt.org/news.html

- update to 1.0.2, support optional documentation installation

Changes: http://libvirt.org/news.html (or newly included NEWS file, optional
docs)

- update to 1.0.1
- support qemu bindings
- drop dependency on autotools suite
- perl is now a build dependency
- fix configuration file installations
- remove property on pkg-plist

Changes: http://libvirt.org/news.html

- update libvirt to 1.0.0, and bump others for shlib change
- explictly tie to ABI version, required
- update historical headers
- add shared description for libvirt

- update to 0.10.1, includes shlib bump

Changes: http://libvirt.org/news.html

- revert accidental commit
303239:300896

10

- update to 0.9.13

Changes: http://libvirt.org/news.html

- Update to 0.9.12
- remove patch files in favor of --without-sysctl (Daniel P. Berrange)

Changes: http://libvirt.org/news.html

- Update to 0.9.11
- bring in libssh2 support and tests

Changes: http://libvirt.org/news.html
Feature safe:   yes

- Update to 0.9.10 ( http://libvirt.org/news.html )

update to 0.9.8 ( http://libvirt.org/news.html )
remove sysctl variable for bsd
update MAINTAINER address, as submitter is now MAINTAINER

PR: ports/163212
Submitted by: Jason Helfman <jhelfman@experts-exchange.com>
Approved by: crees (mentor)

- Update to 0.9.7

PR:             162387
Submitted by:   Jason Helfman <jhelfman@experts-exchange.com> (maintainer)
Feature safe:   yes

Only remove the locale dirs that aren't in mtree; this causes a problem in
dependent ports, namely zenpack-libvirt

Approved by:    Jason Helfman (maintainer, implicit)

- Update to 0.9.6
- Pet portlint

PR:             ports/160912
Submitted by:   Jason Helfman <jhelfman@experts-exchange.com> (maintainer)

- Update to 0.9.4

PR:             ports/159403
Submitted by:   Jason Helfman <jhelfman@experts-exchange.com> (maintainer)

Update to 0.9.2
Fix plist

PR:             ports/157712
Submitted by:   Jason Helfman <jhelfman@experts-exchange.com> (maintainer)
Approved by:    bapt (mentor)

- Install libvirt.pc to libdata/pkgconfig
- Use lib instead of LIB32DIR
- Respect PYTHON_SITELIBDIR: replace %%LIB32DIR%%/python2.7/site-packages
- Use = instead of +=
- Bump PORTREVISION for PLIST change

PR:             ports/157224
Submitted by:   Jason Helfman <jhelfman@experts-exchange.com> (maintainer)

A toolkit to interact with the virtualization capabilities of recent versions of
Linux, and other OSes.

libvirt provides:
* Remote management using TLS encryption and x509 certificates
* Remote management authenticating with Kerberos and SASL
* Local access control using PolicyKit
* Zero-conf discovery using Avahi multicast-DNS
* Management of virtual machines, virtual networks and storage
* Portable client API for Linux, Solaris and Windows

WWW:    http://libvirt.org/

PR:             ports/157024
Submitted by:   Jason Helfman <jhelfman@experts-exchange.com>

Number of commits found XX: 85

12 vulnerabilities affecting 113 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-01-14 20:39:03