15:59 tijl 

Address some portlint warnings in the Linux infrastructure ports.

Eliminate LINUXNAME from port Makefiles.  This was just a helper variable
without special meaning outside port Makefiles but several developers have
copied it to new ports where it was then unused, apparently thinking that
it did have some special meaning.

 

13:13 tijl 

Eliminate RPMVERSION from Linux ports and set DISTVERSIONSUFFIX instead.
This puts all version information together in the port Makefiles.

 

22:24 tcberner 

Qt4 deprecation: add a Qt4 pkg-descr to the linux-*qt4* ports.

- repo copied from devel/qt4@495966

Approved by:	portmgr (implicit)

 

13:14 mat 

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

 

16:54 tijl 

- Autodetect the installed linux_base port and use LINUX_DEFAULT only as
  a last resort.
- Construct a list of DISTFILES for every architecture (amd64, i386).
  Select one list for regular make and all lists for make makesum so linux
  ports can have one combined distinfo file.
- Set DIST_SUBDIR?=centos so there's only one copy of common distfiles.
- Use MASTER_SITES and DISTFILES groups so make fetch is a bit smarter.
- Regenerate all distinfo files.
- For linux_base-c6 (just like linux_base-c7 already does) turn bin, lib,
  lib64 and sbin into symbolic links to the same directory under usr.
  This fixes the problem where some programs/libraries exist under / on
  FreeBSD and /usr on Linux or vice versa and then depending on the order
  of search paths Linux programs may run/load FreeBSD programs/libraries
  and fail.
- Turn usr/share/icons into a symbolic link to LOCALBASE/share/icons so
  Linux programs can find desktop theme icons.  This eliminates the need
  for x11-themes/linux*-hicolor-icon-theme.
- Rename pkg-plist.x86_64 to pkg-plist.amd64.
- Regenerate all pkg-plist files.
- Add @preexec to linux_base pkg-plist that moves existing files in bin,
  lib, lib64, sbin and icons to the new destination before the directories
  are turned into symbolic links.
- Remove several empty directories from linux_base ports.
- Sweep over all linux ports: use consistent style, remove old CONFLICTS,
  remove unused pkg-descr files, add NLS option,...
- Remove old linux arts, esound and openssl-compat ports.

 

10:44 tijl 

Make 64 bit Linux packages the default on amd64.

 

12:43 tijl 

- In Uses/linux.mk use the loop variable directly when appending to
  *_DEPENDS.  Helper variables derived from the loop variable aren't
  expanded causing *_DEPENDS to be incorrect.
- Bump all ports with more than one value in USE_LINUX.

PR:		211645
Reported by:	jkim

 

19:23 tijl 

- Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk with
  Mk/Uses/linux.mk.
- Replace USE_LINUX=yes with USES+=linux and USE_LINUX=(.*) with
  USES+=linux:\1 in all ports.
- Replace USE_LINUX_APPS with USE_LINUX in all ports.
- Use INSTALL_SCRIPT instead of INSTALL_PROGRAM to install scripts in some
  ports.
- When USE_LINUX_RPM is defined, simplify the way DISTFILES and EXTRACT_ONLY
  are defined.
- Remove BRANDELF_DIRS and BRANDELF_FILES handling.  In the very rare cases
  that it is still necessary ports can run ${BRANDELF} from post-patch.
- Remove AUTOMATIC_PLIST handling.  Only one port used it.
- Fix Linux MASTER_SITES.
- Replace OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS with
  default versions framework.
- bsd.port.mk:
  - Move Linux related bits to Uses/linux.mk, except USE_LINUX_PREFIX.
  - Put USE_LINUX_PREFIX handling after USES processing.
  - Define DOCSDIR, DATADIR, etc. after handling USE_LINUX_PREFIX so it can
    give these variables a different default value.
  - When a package needs to run Linux ldconfig check before installation if
    Linux support is enabled.
- emulators/linux_base-*:
  - Use USES=linux and remove duplication.
  - Remove files/lp.  FreeBSD or CUPS lp(1) should work.
  - Remove files/yp.conf.  No longer seems to be used.
  - Remove pkg-deinstall and move pkg-install into pkg-plist.
  - Update pkg-descr and pkg-message.
  - Fix handling of ldconfig cache in pkg-plist.
- devel/fb-adb: Use a Linux shell to run a Linux script but patch the script
  to use FreeBSD mkdir so mkdir -p $path creates $path and not
  /compat/linux/$path.

PR:		211645
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

01:49 swills 

CentOS ports: for c6_64, install 32bit libraries alongside

PR:		206943
Submitted by:	xmj

 

22:53 miwi 

- Update MASTER_SITES

Approved by:	mat (mentor)
Differential Revision:	D4545

 

23:02 bapt 

Mark as broken: does not fetch

 

19:14 netchild 

Re-commit of
64 bit linuxulator support (not activated by default):
 - most of the work was done by Alan Jude
 - all errors are mine
 - 64bit (may) have rough edges
 - I validated
    * that the 32bit part doesn't has deinstall regressions (incl. EXP runs by
      antoine)
    * 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
      later, when I dare to activate the 64bit linuxulator in the kernel)
 - the infrastructure part looks mature enough to let more test-bunnies get
   some experience with the new 64 bit parts
 - to use it you shall have no linux ports installed and have to specify
   (on your own risk) the following in make.conf before installing the ports:
   OVERRIDE_LINUX_BASE_PORT=c6_64
   OVERRIDE_LINUX_NONBASE_PORTS=c6_64

This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).

Differential Revision:	https://reviews.freebsd.org/D174
Submitted by:		alanjude
Sponsored by:		Essen FreeBSD Hackathon 2015
Reviewed by:		xmj, eadler (earlier versions)
Approved by:		portmgr (antoine after some EXP-runs)

 

13:35 antoine 

Unbreak INDEX, reverting r392921

With hat:	portmgr

 

13:06 netchild 

64 bit linuxulator support (not activated by default):
 - most of the work was done by Alan Jude
 - all errors are mine
 - 64bit (may) have rough edges
 - I validated
    * that the 32bit part doesn't has deinstall regressions
    * 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
      later, when I dare to activate the 64bit linuxulator in the kernel)
 - the infrastructure part looks mature enough to let more test-bunnies get
   some experience with it
 - to use it you shall have no linux ports installed and have to specify
   (on your own risk) the following in make.conf before installing the ports:
   OVERRIDE_LINUX_BASE_PORT=c6_64
   OVERRIDE_LINUX_NONBASE_PORTS=c6_64

This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).

Differential Revision:	https://reviews.freebsd.org/D174
Submitted by:		alanjude
Sponsored by:		Essen FreeBSD Hackathon 2015
Reviewed by:		xmj, eadler (earlier versions)
Approved by:		portmgr (implicit, I remember blanked approval for
			linux parts loooong ago, punish me if you don't
			agree anymore)

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

13:06 xmj 

Upgrade CentOS to 6.6

- Upgrade all things linux-c6- to CentOS 6.6
- Add ports:
  devel/linux-c6-libsigc++20
  graphics/linux-c6-gdk-pixbuf [1]
  graphics/linux-c6-glx-utils
- Add pkg-plists for net/linux-c6-openldap
  and security/linux-c6-cyrus-sasl2
- Misc. cleanups

Differential Revision:	https://reviews.freebsd.org/D1108
Submitted by:	kmoore [1]
Reviewed by:	rene (emulation)
Approved by:	portmgr (swills)
Approved by:	swills (mentor)
Sponsored by:	Perceivon Hosting Inc.

 

10:40 xmj 

Update CentOS base to 6.5, add userland ports

The Fedora 10 infrastructure ports have been in use since June 2009 and, while
having served a great deed, have become unsupported upstream and hence affected
by unfixed security vulnerabilities. In addition to that, many recent Linux
binaries need newer libc / stdlibc++ versions.

This commit adds the linux-c6- userland as drop-in replacement for the -f10
infrastructure, as well as upgrading the linux_base-c6 port to CentOS 6.5.

If you want to switch to linux-c6 ports, please define at /etc/make.conf:

    OVERRIDE_LINUX_BASE_PORT=c6
    OVERRIDE_LINUX_NONBASE_PORTS=c6

(Only the first 15 lines of the commit message are shown above )