| non port: devel/p5-Cache-AgainstFile/Makefile |
|
SVNWeb
|
Number of commits found: 18 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ]   (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 24 Dec 2014
|
[ 00:14 bofh ] (Only the first 10 of 432 ports in this commit are shown above. )
Change my non-FreeBSD MAINTAINER mail to bofh@
Approved by: bapt
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 26 May 2014
|
[ 15:33 sunpoet ]
- Add LICENSE
- Pass maintainership to submitter
- While I'm here:
- Fix *_DEPENDS: Test::Assertions is a test-only dependency
- Remove regression-test:
- Bump PORTREVISION for dependency change
PR: ports/190235
Submitted by: Muhammad Moinur Rahman <5u623l20@gmail.com>
|
|
Mon, 28 Oct 2013
|
[ 13:46 vanilla ] (Only the first 10 of 211 ports in this commit are shown above. )
support STAGEDIR.
|
|
Thu, 26 Sep 2013
|
[ 20:08 eadler ]
Certain automated tools fail when @FreeBSD.org is not capitalized appropriatly.
Fix ports which don't follow convention.
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Fri, 2 Aug 2013
|
[ 18:21 az ] (Only the first 10 of 354 ports in this commit are shown above. )
- Convert to new perl framework
|
|
Sat, 27 Jul 2013
|
[ 16:06 swills ] (Only the first 10 of 47 ports in this commit are shown above. )
- Reset maintainer after no response to mail since Jan 2013
- Clean up headers and comments while here
Reviewed by: danfe
|
|
Sun, 10 Jun 2012
|
[ 18:42 swills ] (Only the first 10 of 639 ports in this commit are shown above. )
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
about for a while.
PR: ports/168208
Approved by: portmgr (miwi)
|
|
Tue, 13 Mar 2012
|
[ 16:15 pgollucci ] (Only the first 10 of 391 ports in this commit are shown above. )
- Revert ports/165605 as requested by portmgr@
Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.
PR: ports/165605
Approved by: portmgr (bapt)
Feature safe: yes (I sure hope so)
|
|
Thu, 8 Mar 2012
|
[ 18:45 pgollucci ] (Only the first 10 of 403 ports in this commit are shown above. )
- Remove ports that only work with < perl 5.12 (devel/p5-B-Size,
devel/p5-Devel-Arena)
- Remove conditionals for PERL_LEVEL < 501200
- Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk
- Other minor cleanups
RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}
PR: ports/165605
Submitted by: pgollucci (myself)
Approved by: portmgr (linimon)
Exp Run by: linimon
Tested by: make index
|
|
Mon, 10 May 2010
|
[ 02:39 miwi ]
A module that caches a data structure against a filename, statting the
file to determine whether it has changed and needs to be re-parsed.
You supply a routine to generate the data structure given the filename.
This module is recommended for files which change infrequently but
are read often, especially if they are expensive to parse.
This approach has the advantage over lazy caching that multiple
processes holding a cache will all update at the same time so you
will not get inconsistent results if you request data from different
processes.
The module itself is simply a factory for various backend modules.
The distribution includes backends for in-memory caching or file
caching using Storable, plus an adaptor to use any modules offering
the Cache or Cache::Cache interfaces as the cache implementation.
Data structures are automatically serialised/deserialised by the
backend modules if they are being persisted somewhere other than
in memory (e.g. on the filesystem).
WWW: http://search.cpan.org/dist/Cache-AgainstFile/
PR: ports/146443
Submitted by: Eric Freeman <freebsdports at chillibear.com>
|
Number of commits found: 18 |
As an Amazon Associate I earn from qualifying purchases.