p5-Config-INI-Simple Simple reading and writing from an INI file
1.00 devel =2

Maintainer: sunpoet@FreeBSD.org
Port Added: 2006-07-11 15:56:20
Last Update: 2018-10-06 14:06:45
SVN Revision: 481365
Also Listed In: perl5
License: ART10 GPLv1+

Config::INI::Simple is for very simplistic reading and writing of INI files. A
new object must be created for each INI file (an object keeps all the data read
in from an INI which is used on the write method to write to the INI). It also
keeps all your comments and original order intact.

WWW: https://metacpan.org/release/TORG/Config-INI-Simple-1.00

SVNWeb : Homepage : PortsMon

Pseudo-pkg-plist information, but much better, from make generate-plist
Expand this list (6 items)

1. /usr/local/share/licenses/p5-Config-INI-Simple-1.00/catalog.mk
2. /usr/local/share/licenses/p5-Config-INI-Simple-1.00/LICENSE
3. /usr/local/share/licenses/p5-Config-INI-Simple-1.00/ART10
4. /usr/local/share/licenses/p5-Config-INI-Simple-1.00/GPLv1+
5. lib/perl5/site_perl/Config/INI/Simple.pm
6. lib/perl5/site_perl/man/man3/Config::INI::Simple.3.gz
Collapse this list.

Dependency line: p5-Config-INI-Simple>0:devel/p5-Config-INI-Simple

---

To install the port: cd /usr/ports/devel/p5-Config-INI-Simple/ && make install clean
To add the package: pkg install p5-Config-INI-Simple

PKGNAME: p5-Config-INI-Simple

There is no flavor information for this port.

distinfo:

TIMESTAMP = 1527133140
SHA256 (Config-INI-Simple-1.00.tar.gz) = 4f6e5ce4b168499d7e863ff4760a45f63eb42e4c3744d3dec39c0730cf1165f8
SIZE (Config-INI-Simple-1.00.tar.gz) = 2601

---

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

1. p5-File-Slurp>=0 : devel/p5-File-Slurp
2. perl5>=5.26<5.27 : lang/perl5.26
3. perl5>=5.26<5.27 : lang/perl5.26

Runtime dependencies:

1. p5-File-Slurp>=0 : devel/p5-File-Slurp
2. perl5>=5.26<5.27 : lang/perl5.26

This port is required by:

for Build

1. textproc/p5-Plagger

for Run

1. textproc/p5-Plagger

* - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

---

Configuration Options

     No options to configure

---

USES:

perl5

---

Master Sites:

2. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/authors/id/T/TO/TORG/
3. ftp://ftp.cpan.org/pub/CPAN/authors/id/T/TO/TORG/
4. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Config/
5. ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/T/TO/TORG/
6. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/authors/id/T/TO/TORG/
7. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/authors/id/T/TO/TORG/
8. http://backpan.perl.org/authors/id/T/TO/TORG/
9. http://ftp.jaist.ac.jp/pub/CPAN/authors/id/T/TO/TORG/
10. http://ftp.twaren.net/Unix/Lang/CPAN/authors/id/T/TO/TORG/
11. https://cpan.metacpan.org/authors/id/T/TO/TORG/
12. https://cpan.metacpan.org/modules/by-module/Config/
13. https://www.cpan.org/authors/id/T/TO/TORG/

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Update to 1.00

- Update WWW

Changes:	https://metacpan.org/changes/distribution/Config-INI-Simple

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

- Add NO_ARCH

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Cleanup plist

- Add LICENSE
- Sort PLIST
- Reformat pkg-descr

- Take maintainership

multiple: reset gslin's maintainer
	By request of Gea-Suan Lin <gslin@gslin.org> - reset ports to ports@FreeBSD.

	Gea-Suan Lin's work is much appreciated.

Approved by:	portmgr (implicit) (not really, skipping NO_STAGE check)

- add stage support

Approved by:	portmgr (blanket infrastructure)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Change PERL_CONFIGURE to "yes" for all values between 5.8.1+ and 5.8.9+

Suggested by:   az
With hat:       perl

-remove MD5

- only 13% of the p5- ports embed @comment $FreeBSD$:
  so standarize and remove it

With Hat:   perl@

- Update to 0.02

PR:             ports/122836
Submitted by:   Artem Naluzhnyy <tut_AT_nhamon dot com dot ua>
Approved by:    maintainer (Gea-Suan Lin)

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

- - Fix pointyhat report on perl 5.00503.

PR:             ports/100240
Submitted by:   maintainer (Gea-Suan Lin)

Add p5-Config-INI-Simple 0.01, simple reading and writing from an INI
file.

PR:             ports/100078
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

11 vulnerabilities affecting 150 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-03-22 04:09:33