non port: devel/p5-Data-TreeDumper-Renderer-GTK/Makefile |
SVNWeb
|
Number of commits found: 23 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
Sat, 30 May 2015
|
[ 12:34 amdmi3 ]
- Fix shebangs
- Add NO_ARCH
Approved by: portmgr blanket
MFH: 2015Q2
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
Fri, 25 Oct 2013
|
[ 11:20 ehaupt ] (Only the first 10 of 36 ports in this commit are shown above. )
Fix pacakge list.
Notified by: az
|
Wed, 23 Oct 2013
|
[ 10:26 ehaupt ] (Only the first 10 of 48 ports in this commit are shown above. )
Support staging.
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
Mon, 9 Sep 2013
|
[ 18:34 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
- trim Makefile header
Approved by: portmgr (bapt@, blanket)
|
Wed, 24 Jul 2013
|
[ 08:19 ehaupt ] (Only the first 10 of 161 ports in this commit are shown above. )
Remove MAKE_JOBS_SAFE which is now default.
|
Mon, 8 Jul 2013
|
[ 18:42 ehaupt ] (Only the first 10 of 73 ports in this commit are shown above. )
- Convert USE_GMAKE to USES=gmake
- Change pkgconfig:build to pkgconfig since it's the same and it's bad practice.
It accidentally slipped in during the original introduction
- Trim header
|
Wed, 6 Jun 2012
|
[ 10:43 ehaupt ]
Get rid of ${SITE_PERL} in *_DEPENDS
Submitted by: az
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Fri, 27 Mar 2009
|
[ 09:53 ehaupt ] (Only the first 10 of 132 ports in this commit are shown above. )
Mark MAKE_JOBS_SAFE
|
Tue, 2 Sep 2008
|
[ 11:31 ehaupt ]
Update to 0.02
|
Fri, 6 Jun 2008
|
[ 13:21 edwin ] (Only the first 10 of 367 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Mon, 21 Apr 2008
|
[ 13:39 ehaupt ]
Add p5-Data-TreeDumper-Renderer-GTK 0.01, GTK renderer for
Data::TreeDumper.
|
Number of commits found: 23 |