non port: devel/p5-Params-CallbackRequest/Makefile |
SVNWeb
|
Number of commits found: 21 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Mon, 9 Jul 2018
|
[ 08:40 mat ] (Only the first 10 of 429 ports in this commit are shown above. )
Remove all := from BUILD_DEPENDS, here are never needed.
While there, cleanup, and sort depends.
When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS. In order of preference, they are:
1) use RUN_DEPENDS to set BUILD_DEPENDS:
BUILD_DEPENDS= ${RUN_DEPENDS}
RUN_DEPENDS= foo:bar/baz
2) create another variable and use it:
MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS= ${MY_DEPENDS}
RUN_DEPENDS= ${MY_DEPENDS}
3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:
BUILD_DEPENDS= foo:bar/baz
RUN_DEPENDS:= ${BUILD_DEPENDS}
Sponsored by: Absolight
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
Thu, 31 Oct 2013
|
[ 06:20 vanilla ] (Only the first 10 of 97 ports in this commit are shown above. )
Support STAGEDIR.
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
Fri, 2 Aug 2013
|
[ 18:52 mat ] (Only the first 10 of 1871 ports in this commit are shown above. )
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.
|
Sun, 10 Jun 2012
|
[ 18:42 swills ] (Only the first 10 of 639 ports in this commit are shown above. )
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
about for a while.
PR: ports/168208
Approved by: portmgr (miwi)
|
Thu, 7 Jun 2012
|
[ 13:46 culot ] (Only the first 10 of 15 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Submitted by: az@
|
Fri, 24 Jun 2011
|
[ 01:54 swills ]
- Update to 1.20
|
Fri, 23 Oct 2009
|
[ 00:30 leeym ] (Only the first 10 of 28 ports in this commit are shown above. )
- replace ${SITE_PERL}/${PERL_ARCH}/Params/Validate.pm with
p5-Params-Validate>=0 since it changed the file path.
- portlint
PR: follow-up to ports/139837
Submitted by: Gea-Suan Lin <gslin at gslin.org>
|
Tue, 24 Jun 2008
|
[ 14:59 clsung ]
- Update to 1.19
Changes: http://search.cpan.org/dist/Params-CallbackRequest/Changes
|
Mon, 5 May 2008
|
[ 11:47 mat ]
Update to 1.18
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
Thu, 29 Mar 2007
|
[ 02:27 leeym ]
- update to 1.17
|
Tue, 27 Mar 2007
|
[ 16:32 leeym ]
- update to 1.16
|
Sun, 25 Mar 2007
|
[ 22:19 linimon ]
Reset ports@rbt.ca due to current lack of time to work on FreeBSD.
Hat: portmgr
|
Fri, 2 Jun 2006
|
[ 03:31 aaron ]
- Update from v1.13 to v1.15
- Restrict to Perl 5.8+ due to dependency upon devel/p5-Class-Exception
1.15 2006-05-26T21:28:55
- Added the 'requester' attribute to Params::Callback. This can be
specified by passing the 'requester' paremter to request(), and can be
anything.
1.14 2006-03-02T20:07:28
- Removed an unnecessary eval block around the loading of Class::ISA
and Attribute::Handlers that would prevent the failure of either
of
those modules to load to propagate.
- Fixed typo in the Synopsis spotted by Scott Lanning.
- Added support for mod_perl2, as well as mod_perl 1 and mod_perl 1.99.
PR: ports/98303
Submitted by: aaron
Reviewed by: maintainer
Approved by: maintainer, tobez (implicit)
|
Mon, 24 May 2004
|
[ 17:22 mat ]
Add p5-Params-CallbackRequest 1.13, provide callbacks to method and
function parameters.
PR: ports/67022
Submitted by: Rod Taylor <ports@rbt.ca>
|
Number of commits found: 21 |