Port details |
- py-bytecode Python module to generate and modify bytecode
- 0.16.0 devel =2 0.15.1Version of this port present on the latest quarterly branch.
- Maintainer: sunpoet@FreeBSD.org
- Port Added: 2022-06-29 16:36:09
- Last Update: 2024-10-30 14:54:24
- Commit Hash: 43f1050
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: MIT
- WWW:
- https://github.com/MatthieuDartiailh/bytecode
- Description:
- bytecode is a Python module to generate and modify bytecode.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}bytecode>0:devel/py-bytecode@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-bytecode/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-bytecode
- pkg install py311-bytecode
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py311-bytecode listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-bytecode
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1730296024
SHA256 (bytecode-0.16.0.tar.gz) = 06676a3c3bccc9d3dc73ee625650ea57df2bc117358826f4f290f0e1faa42292
SIZE (bytecode-0.16.0.tar.gz) = 102126
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-setuptools>=61.2 : devel/py-setuptools@py311
- py311-setuptools-scm>=3.4.3 : devel/py-setuptools-scm@py311
- py311-wheel>=0 : devel/py-wheel@py311
- python3.11 : lang/python311
- py311-build>=0 : devel/py-build@py311
- py311-installer>=0 : devel/py-installer@py311
- Test dependencies:
-
- python3.11 : lang/python311
- Runtime dependencies:
-
- python3.11 : lang/python311
- This port is required by:
- for Run
-
- devel/py-ddtrace
Configuration Options:
- No options to configure
- Options name:
- devel_py-bytecode
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
0.16.0 30 Oct 2024 14:54:24 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Update to 0.16.0
Changes: https://github.com/MatthieuDartiailh/bytecode/releases
https://github.com/MatthieuDartiailh/bytecode/blob/main/doc/changelog.rst |
0.15.1 29 Feb 2024 07:18:32 |
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
0.15.1 16 Oct 2023 15:59:45 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Update to 0.15.1
Changes: https://github.com/MatthieuDartiailh/bytecode/releases
https://github.com/MatthieuDartiailh/bytecode/blob/main/doc/changelog.rst |
0.15.0 04 Sep 2023 21:30:09 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Update to 0.15.0
Changes: https://github.com/MatthieuDartiailh/bytecode/releases
https://github.com/MatthieuDartiailh/bytecode/blob/main/doc/changelog.rst |
0.14.2 18 Jul 2023 00:53:09 |
Charlie Li (vishwin) |
devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}
Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.
With hat: python
PR: 270510, 270358 |
0.14.2 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.14.2 27 May 2023 23:43:52 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Update to 0.14.2
- Add GitHub to MASTER_SITES
- Convert to USE_PYTHON=pep517
Changes: https://github.com/MatthieuDartiailh/bytecode/releases
https://github.com/MatthieuDartiailh/bytecode/blob/main/doc/changelog.rst |
0.14.1 09 Apr 2023 13:36:46 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Update to 0.14.1
Changes: https://github.com/MatthieuDartiailh/bytecode/releases
https://github.com/MatthieuDartiailh/bytecode/blob/main/doc/changelog.rst |
0.14.0 30 Jan 2023 12:59:39 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Update to 0.14.0
Changes: https://github.com/MatthieuDartiailh/bytecode/releases
https://github.com/MatthieuDartiailh/bytecode/blob/main/doc/changelog.rst |
0.13.0 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.13.0 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.13.0 20 Jul 2022 14:21:35 |
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
0.13.0 29 Jun 2022 16:32:33 |
Po-Chuan Hsieh (sunpoet) |
devel/py-bytecode: Add py-bytecode 0.13.0
bytecode is a Python module to generate and modify bytecode.
WWW: https://github.com/MatthieuDartiailh/bytecode |