Port details |
- py-ctypesgen Python wrapper generator for ctypes
- 1.1.1_1 devel
=2 1.1.1_1Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
 - Port Added: 2021-06-25 13:45:16
- Last Update: 2024-03-31 03:06:20
- Commit Hash: 6ad9198
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD2CLAUSE
- WWW:
- https://github.com/ctypesgen/ctypesgen
- Description:
- ctypesgen is a pure-python ctypes wrapper generator. It can also output JSON,
which can be used with Mork, which generates bindings for Lua, using the alien
module (which binds libffi to Lua).
¦ ¦ ¦ ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}ctypesgen>0:devel/py-ctypesgen@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-ctypesgen/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-ctypesgen
- pkg install py39-ctypesgen
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-ctypesgen listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-ctypesgen
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1669057701
SHA256 (ctypesgen-1.1.1.tar.gz) = deaa2d64a95d90196a2e8a689cf9b952be6f3366f81e835245354bf9dbac92f6
SIZE (ctypesgen-1.1.1.tar.gz) = 143415
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=44 : devel/py-setuptools@py39
- py39-setuptools-scm>=3.4.3 : devel/py-setuptools-scm@py39
- py39-toml>=0 : textproc/py-toml@py39
- py39-wheel>=0 : devel/py-wheel@py39
- python3.9 : lang/python39
- py39-build>=0 : devel/py-build@py39
- py39-installer>=0 : devel/py-installer@py39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- devel_py-ctypesgen
- USES:
- python shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
1.1.1_1 31 Mar 2024 03:06:20
    |
Po-Chuan Hsieh (sunpoet)  |
devel/py-ctypesgen: Add missing BUILD_DEPENDS
- Remove PY_SETUPTOOLS: py-setuptools should be used rather than PY_SETUPTOOLS |
1.1.1_1 29 Feb 2024 07:18:32
    |
Charlie Li (vishwin)  |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
1.1.1_1 18 Jul 2023 00:53:09
    |
Charlie Li (vishwin)  |
devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}
Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.
With hat: python
PR: 270510, 270358 |
1.1.1_1 30 Jun 2023 07:03:21
    |
Po-Chuan Hsieh (sunpoet)  |
devel/py-ctypesgen: Convert to USE_PYTHON=pep517
- Bump PORTREVISION for package change |
1.1.1 27 Jun 2023 19:34:34
    |
Rene Ladan (rene)  |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
1.1.1 11 Jan 2023 15:58:34
    |
Dmitry Marakasov (amdmi3)  |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
1.1.1 30 Dec 2022 09:04:31
    |
Po-Chuan Hsieh (sunpoet)  |
devel/py-ctypesgen: Update to 1.1.1
Changes: https://github.com/ctypesgen/ctypesgen/releases |
1.1.0 19 Nov 2022 08:11:58
    |
Po-Chuan Hsieh (sunpoet)  |
devel/py-ctypesgen: Update to 1.1.0
- Change MASTER_SITES from GitHub to CHEESESHOP
- Update WWW
Changes: https://github.com/ctypesgen/ctypesgen/releases |
07 Sep 2022 21:58:51
    |
Stefan Eßer (se)  |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.0.2 07 Sep 2022 21:10:59
    |
Stefan Eßer (se)  |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
1.0.2 20 Jul 2022 14:21:35
    |
Tobias C. Berner (tcberner)  |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
1.0.2 25 Jun 2021 13:33:51
    |
Po-Chuan Hsieh (sunpoet)  |
devel/py-ctypesgen: Add py-ctypesgen 1.0.2
ctypesgen is a pure-python ctypes wrapper generator. It can also output JSON,
which can be used with Mork, which generates bindings for Lua, using the alien
module (which binds libffi to Lua).
WWW: https://github.com/davidjamesca/ctypesgen |