| Port details |
- py-hunter Flexible code tracing toolkit
- 3.6.1 devel
 =0      3.6.1Version of this port present on the latest quarterly branch. - Maintainer: yuri@FreeBSD.org
- Port Added: 2023-02-05 22:15:11
- Last Update: 2024-02-29 07:18:32
- Commit Hash: 5d4139f
- Also Listed In: python
- License: BSD2CLAUSE
- WWW:
- https://github.com/ionelmc/python-hunter
- Description:
- Hunter is a flexible code tracing toolkit, not for measuring coverage, but for
debugging, logging, inspection and other nefarious purposes. It has a simple
Python API, a convenient terminal API and a CLI tool to attach to processes.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}hunter>0:devel/py-hunter@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-hunter/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-hunter
- pkg install py39-hunter
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-hunter listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-hunter
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1687071920
SHA256 (hunter-3.6.1.tar.gz) = 16fbea3d6a67d474e13ee726bdf464211613ddddde338345338c3a5cd942585b
SIZE (hunter-3.6.1.tar.gz) = 644202
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>0 : devel/py-setuptools@py39
- py39-setuptools-scm>=3.3.1 : devel/py-setuptools-scm@py39
- py39-wheel>0 : devel/py-wheel@py39
- cython-3.9 : lang/cython@py39
- python3.9 : lang/python39
- py39-build>=0 : devel/py-build@py39
- py39-installer>=0 : devel/py-installer@py39
- Test dependencies:
-
- py39-aspectlib>0 : devel/py-aspectlib@py39
- py39-process-tests>0 : devel/py-process-tests@py39
- py39-pytest>=7,1 : devel/py-pytest@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- devel_py-hunter
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Number of commits found: 8
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
3.6.1
29 Feb 2024 07:18:32
 |
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
3.6.1
18 Jul 2023 00:53:09
|
Charlie Li (vishwin) |
devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}
Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.
With hat: python
PR: 270510, 270358 |
3.6.1
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
3.6.1
18 Jun 2023 17:10:30
|
Yuri Victorovich (yuri) |
devel/py-hunter: Add missing test dependencies |
3.6.1
18 Jun 2023 07:36:15
|
Yuri Victorovich (yuri) |
devel/py-hunter: Update 3.6.0 → 3.6.1
Reported by: portscout |
3.6.0
27 Apr 2023 08:36:48
|
Yuri Victorovich (yuri) |
devel/py-hunter: Update 3.5.1 → 3.6.0
Reported by: portscout |
3.5.1_1
04 Apr 2023 18:29:11
|
Antoine Brodin (antoine) |
USE_PYTHON=pep517: bump PORTREVISION |
3.5.1
05 Feb 2023 22:12:26
|
Yuri Victorovich (yuri) |
devel/py-hunter: New port: Flexible code tracing toolkit |
Number of commits found: 8
|
As an Amazon Associate I earn from qualifying purchases.