| Port details |
- py-phpserialize Port of the serialize and unserialize functions of PHP to Python
- 1.3 devel
 =2      1.3Version of this port present on the latest quarterly branch. - Maintainer: jnlin@freebsd.cs.nctu.edu.tw
- Port Added: 2008-09-07 10:43:50
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- http://www.hurring.com/scott/code/python/serialize/
- Description:
- A port of the serialize() and unserialize() functions of PHP to Python. This
module implements the python serialization interface (eg: provides dumps,
loads and similar functions).
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}phpserialize>0:devel/py-phpserialize@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-phpserialize/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-phpserialize
- pkg install py39-phpserialize
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-phpserialize listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-phpserialize
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1478551844
SHA256 (phpserialize-1.3.tar.gz) = bf672d312d203d09a84c26366fab8f438a3ffb355c407e69974b7ef2d39a0fa7
SIZE (phpserialize-1.3.tar.gz) = 7466
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- devel_py-phpserialize
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.3
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
1.3
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.3
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.3
20 Jul 2022 14:21:35
|
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
1.3
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.3
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
1.3
29 Dec 2017 09:01:54
 |
antoine |
Simplify some USES=python
With hat: portmgr |
1.3
29 Nov 2016 04:37:21
|
rm |
devel/py-phpserialize: update to 1.3
- switch to pypi (old upstream url seems dead)
- trim categories a bit
- define LICENSE (BSD3C, confirmed with upstream developer)
- add NO_ARCH and define supported python versions range
- general clean-up
PR: 214310
Approved by: maintainer timeout (14 days) |
0.4_2
22 Nov 2016 14:04:22
|
danfe |
In several dozen ports, use single space for WWW: line in pkg-descr, and
reformat port description text in cases when it was notoriously broken. |
0.4_2
02 Mar 2016 05:41:04
|
lwhsu |
- Update maintainer's email address
Submitted by: maintainer (via facebook chat) |
0.4_2
20 Oct 2014 16:04:14
|
mva |
- Convert ports of devel/ to USES=python
Approved by: portmgr (implicit) |
0.4_2
23 Jul 2014 01:45:47
|
adamw |
Remove backslashes from single- and double-quotes in COMMENT and _DESC
strings, that were passed through rather than escaping anything.
Approved by: portmgr (not really, but it touches unstaged ports) |
0.4_2
10 Jun 2014 07:39:02
|
olgeni |
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories D-F.
CR: D196
Approved by: portmgr (bapt) |
0.4_2
06 Mar 2014 15:03:33
|
miwi |
- Stage support
- Convert to autoplist
- Bump PORTREVISION |
0.4_1
13 Jan 2014 21:00:04
|
rene |
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat) |
0.4_1
20 Sep 2013 17:13:47
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3) |
0.4_1
03 Jul 2011 14:59:23
|
ohauer |
-remove MD5 |
0.4_1
25 Feb 2011 07:50:41
|
miwi |
- Move from py24 over to py25 or above
- Drop md5 support |
0.4
28 Dec 2008 10:54:08
|
pgollucci |
CATEGORIES+= python for py- ports missing it
PR: ports/124921
Approved by: portmgr (pav) |
0.4
07 Sep 2008 10:43:28
|
lwhsu |
Add py-phpserialize 0.4, a python implementation of PHP\'s native
serialize() and unserialize().
PR: ports/126193
Submitted by: Jui-Nan Lin <jnlin at csie.nctu.edu.tw> |
As an Amazon Associate I earn from qualifying purchases.