devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-prance: Update to 23.6.21.0

- Update WWW
- Change RUN_DEPENDS from py-click7 to py-click
- Allow build with py-openapi-spec-validator 0.6.0+

Changes:	https://github.com/RonnyPfannschmidt/prance/blob/main/CHANGES.rst

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

devel/py-prance: Allow build with py-semver 3.0.0+

- Bump PORTREVISION for package change

devel/py-prance: Update to 0.22.11.4.0

- Convert to USE_PYTHON=pep517

Changes:	https://github.com/RonnyPfannschmidt/prance/blob/main/CHANGES.rst

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

devel/py-prance: Update to 0.21.8.0

Changes:	https://github.com/RonnyPfannschmidt/prance/blob/main/CHANGES.rst

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/py-prance: Unbreak this port after
19e3341468e743268c8e803d1ca73e21ecda16d3

- Change RUN_DEPENDS from py-click to py-click7
- Bump PORTREVISION for dependency change

devel/py-prance: Revert e6ef35b3f8840514c41e0fce60656e7a07206f03

It was committed by accident.

devel/py-prance: Update to 0.21.8.0

Changes:	https://github.com/RonnyPfannschmidt/prance/blob/main/CHANGES.rst

devel/py-prance: Update to 0.21.2

Changes:	https://github.com/RonnyPfannschmidt/prance/blob/main/CHANGES.rst

devel/py-prance: Update to 0.20.2

Changes:	https://github.com/RonnyPfannschmidt/prance/blob/main/CHANGES.rst

devel/py-prance: Update version requirement of RUN_DEPENDS

Remove # $FreeBSD$ from Makefiles.

Fix version requirement of RUN_DEPENDS

Remove py-pytest-runner from BUILD_DEPENDS

Update to 0.20.0

Changes:	https://github.com/jfinkhaeuser/prance/blob/master/CHANGES.rst
		https://github.com/jfinkhaeuser/prance/commits/master

Update to 0.19.0

Changes:	https://github.com/jfinkhaeuser/prance/blob/master/CHANGES.rst

Update to 0.18.3

Changes:	https://github.com/jfinkhaeuser/prance/blob/master/CHANGES.rst

Update to 0.18.2

Changes:	https://github.com/jfinkhaeuser/prance/blob/master/CHANGES.rst

Update to 0.17.0

Changes:	https://github.com/jfinkhaeuser/prance/blob/master/CHANGES.rst

Update to 0.16.2

Changes:	https://github.com/jfinkhaeuser/prance/commits/master

Update to 0.16.1

Changes:	https://github.com/jfinkhaeuser/prance/commits/master

Add CLI, FLEX, ICU, OSV and SSV options

- Enable OSV as validation backend by default
- Bump PORTREVISION for dependency change

Update to 0.16.0

Changes:	https://github.com/jfinkhaeuser/prance/commits/master

Add py-prance 0.15.0

Prance provides parsers for Swagger/OpenAPI 2.0 and 3.0 API specifications in
Python. It uses flex, swagger_spec_validator or openapi_spec_validator to
validate specifications, but additionally resolves JSON references in accordance
with the OpenAPI spec.

Mostly the latter involves handling non-URI references; OpenAPI is fine with
providing relative file paths, whereas JSON references require URIs at this
point in time.

WWW: https://github.com/jfinkhaeuser/prance