notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: There is a known problem on production with searching pkg-plist - it returns no results. This problem is not present on stage.freshports.org
non port: devel/py-rauth/Makefile
SVNWeb

Number of commits found: 26

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:21 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:aa6eefd5e663357e8223399bc38c7987f5e35746  commit hash:aa6eefd5e663357e8223399bc38c7987f5e35746  commit hash:aa6eefd5e663357e8223399bc38c7987f5e35746  aa6eefd  (Only the first 10 of 5087 ports in this commit are shown above. View all ports for this commit)
devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 4 Jul 2022
[ 15:46 Muhammad Moinur Rahman (bofh) search for other commits by this committer ]    commit hash:8c88b908be62f556910ef10e11458410492a990d  commit hash:8c88b908be62f556910ef10e11458410492a990d  commit hash:8c88b908be62f556910ef10e11458410492a990d  8c88b90 
devel/py-rauth: Remove DEPRECATION

- Change TEST_DEPENDS to security/py-cryptodome a drop in replacement
  for now defunct security/py-crypto
- Add USE_PYTHON=nose
Sat, 2 Jul 2022
[ 09:31 Rene Ladan (rene) search for other commits by this committer ]    commit hash:9cdcd34f9d4fff2b3dc00c79a34c6e67af107497  commit hash:9cdcd34f9d4fff2b3dc00c79a34c6e67af107497  commit hash:9cdcd34f9d4fff2b3dc00c79a34c6e67af107497  9cdcd34  (Only the first 10 of 15 ports in this commit are shown above. View all ports for this commit)
cleanup: expire consumers of security/py-pycrypto on 2022-09-30

These should probably use security/py-pycryptodome instead.
Tue, 8 Mar 2022
[ 02:09 Muhammad Moinur Rahman (bofh) search for other commits by this committer ]    commit hash:bc808e2bfff33c5b4260c571ee628017ca41f1b9  commit hash:bc808e2bfff33c5b4260c571ee628017ca41f1b9  commit hash:bc808e2bfff33c5b4260c571ee628017ca41f1b9  bc808e2  (Only the first 10 of 106 ports in this commit are shown above. View all ports for this commit)
*/*: Take maintainership
Mon, 7 Mar 2022
[ 19:07 Rene Ladan (rene) search for other commits by this committer ]    commit hash:3d89f95e2ff861b1e06ad114422b5d116a856970  commit hash:3d89f95e2ff861b1e06ad114422b5d116a856970  commit hash:3d89f95e2ff861b1e06ad114422b5d116a856970  3d89f95  (Only the first 10 of 140 ports in this commit are shown above. View all ports for this commit)
all: return koobs' ports to the pool after safekeeping his commit bit.
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Mon, 28 Dec 2020
[ 23:02 antoine search for other commits by this committer ] Original commit   Revision:559531 (Only the first 10 of 1942 ports in this commit are shown above. View all ports for this commit)
Drop python 2.7 support from a few ports

With hat:	portmgr
Wed, 20 Jun 2018
[ 17:05 mat search for other commits by this committer ] Original commit   Revision:472884 (Only the first 10 of 1617 ports in this commit are shown above. View all ports for this commit)
Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight
Thu, 30 Nov 2017
[ 15:50 mat search for other commits by this committer ] Original commit   Revision:455210 (Only the first 10 of 2423 ports in this commit are shown above. View all ports for this commit)
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Mon, 22 Feb 2016
[ 09:37 koobs search for other commits by this committer ] Original commit   Revision:409321
devel/py-rauth: Update to 0.7.2, Modernize

- Update PORTVERSION and distinfo checksum (0.7.2)
- Add LICENSE_FILE
- Update RUN_DEPENDS (Switch to www/requests from requests1
- Update TEST dependencies and test target
- Remove TESTS options bits accordingly
- Patch setup.py to enable setuptools test command support
- Update pkg-descr based on latest upstream text
- Enable NO_ARCH (architecture independence)
Mon, 17 Aug 2015
[ 14:20 mat search for other commits by this committer ] Original commit   Revision:394508 (Only the first 10 of 271 ports in this commit are shown above. View all ports for this commit)
Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336
Wed, 6 May 2015
[ 15:16 mat search for other commits by this committer ] Original commit   Revision:385521 (Only the first 10 of 348 ports in this commit are shown above. View all ports for this commit)
Update ports in the [bcd]* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight
Mon, 20 Oct 2014
[ 16:04 mva search for other commits by this committer ] Original commit   Revision:371280 (Only the first 10 of 564 ports in this commit are shown above. View all ports for this commit)
- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)
Mon, 9 Jun 2014
[ 14:19 mva search for other commits by this committer ] Original commit   Revision:357153
- Remove easy_install dependency
- Bump PORTREVISION to enforce a cleanup for the easy_install references

With hat:	python@
Approved by:	portmgr (implicit)
Mon, 27 Jan 2014
[ 12:14 koobs search for other commits by this committer ] Original commit   Revision:341385 (Only the first 10 of 20 ports in this commit are shown above. View all ports for this commit)
Sweep www/py-requests dependants to www/py-requests1

Point all www/py-requests dependants to www/py-requests1 in preparation for
the upgrade of www/py-requests to version 2.x, which substantially breaks API
compatibility.

Maintainers of these ports can update their requests dependency independently
as time for sufficient testing permits.

PR:		ports/185631
Sat, 30 Nov 2013
[ 15:46 koobs search for other commits by this committer ] Original commit   Revision:335303
devel/py-rauth: Update to 0.6.2

- Update to 0.6.2
- Enable STAGE support, delete pkg-plist
- Enable AUTOPLIST support
- Update RUN_DEPENDS minimum version for requests
- Re-order *_DEPENDS and USE_* sections
- Add pycrypto to TEST_DEPENDS

Changes:

 https://github.com/litl/rauth/blob/0.6.2/CHANGELOG
Fri, 20 Sep 2013
[ 17:13 bapt search for other commits by this committer ] Original commit   Revision:327724 (Only the first 10 of 2998 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
Sun, 28 Apr 2013
[ 07:56 koobs search for other commits by this committer ] Original commit   Revision:316705
devel/py-rauth: Update to 0.5.4

- Update minimum version for py-requests
- Include minimum versions for py-mock and py-nose

Changes: https://github.com/litl/rauth/blob/0.5.4/CHANGELOG

Approved by:	eadler, rm (mentors, implicit)
Tue, 26 Mar 2013
[ 07:34 koobs search for other commits by this committer ] Original commit   Revision:315264
- Update to 0.5.1
- Update and sort pkg-plist
- Tweak COMMENT according to standards
- Tab->space in pkg-descr

Approved by:	eadler (mentor)
Sat, 9 Feb 2013
[ 14:50 koobs search for other commits by this committer ] Original commit   Revision:311983 (Only the first 10 of 35 ports in this commit are shown above. View all ports for this commit)
Update MAINTAINER address for all my ports. While I'm here,
standardise and canonicalise Makefile header format and contents.

Approved by:	eadler (mentor)
Sat, 24 Nov 2012
[ 19:17 wxs search for other commits by this committer ] Original commit   Revision:307723
Update to 0.4.17.
Switch to github.
Add tests.

PR:		ports/173855
Submitted by:	Kubilay Kocak <koobs.freebsd@gmail.com> (maintainer)
Feature safe:	yes
Thu, 16 Aug 2012
[ 20:09 rm search for other commits by this committer ] Original commit 
- update to 0.4.15
- tab -> space in pkg-descr:WWW, while here

PR:		170665
Submitted by:	Kubilay Kocak <koobs.freebsd at gmail dot com> (maintainer)
Thu, 2 Aug 2012
[ 02:42 zi search for other commits by this committer ] Original commit 
- Update to 0.4.14

PR:		ports/170272
Submitted by:	Kubilay Kocak <koobs.freebsd@gmail.com> (maintainer)
Sun, 17 Jun 2012
[ 19:16 rm search for other commits by this committer ] Original commit 
This package provides OAuth 1.0/a, 2.0, and Ofly consumer support. The
package is wrapped around the superb Python Requests.

- Built on Python-Requests
- Supports OAuth 1.0, 1.0a, 2.0 and Ofly]
- Service wrappers for convenient connection initialization
- Well tested (100% coverage)

WWW:    https://github.com/litl/rauth

PR:             168802
Submitted by:   koobs <koobs.freebsd at gmail dot com>

Number of commits found: 26