| Port details |
- py-testinfra Testinfra python module Serverspec-like for infrastructure testing
- 3.2.0 devel
 =0      3.2.0Version of this port present on the latest quarterly branch. - Maintainer: sbz@FreeBSD.org
- Port Added: 2017-09-30 15:37:22
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- Also Listed In: python
- License: APACHE20
- Description:
- Testinfra test your infrastructures.
With Testinfra you can write unit tests in Python to test *actual state* of
your servers configured by management tools like Salt, Ansible, Puppet,
Chef and so on.
Testinfra aims to be a Serverspec equivalent in python and is written as
a plugin to the powerful Pytest test engine.
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}testinfra>0:devel/py-testinfra@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-testinfra/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-testinfra
- pkg install py39-testinfra
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-testinfra listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-testinfra
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1569005618
SHA256 (testinfra-3.2.0.tar.gz) = 5cebf61fee13c2e83b5e177431e751e243fc779293377c5e0c3b43910bb7e870
SIZE (testinfra-3.2.0.tar.gz) = 71337
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools_scm>0 : devel/py-setuptools_scm@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-pytest>0 : devel/py-pytest@py39
- py39-six>1.4 : devel/py-six@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- devel_py-testinfra
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
3.2.0
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
3.2.0
02 May 2023 16:25:56
|
Po-Chuan Hsieh (sunpoet) |
devel/py-testinfra: Add NO_ARCH
Approved by: portmgr (blanket) |
3.2.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
3.2.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
3.2.0
20 Jul 2022 14:21:35
|
Tobias C. Berner (tcberner) |
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
3.2.0
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
3.2.0
14 Jul 2020 07:59:28
 |
antoine |
Unbreak bulk -a |
3.2.0
23 Sep 2019 18:19:14
|
sbz |
- Update to 3.2.0
PR: 240714
Submitted by: matthew |
2.0.0
06 Apr 2019 08:08:51
|
matthew |
Update to 2.0.0
ChangeLog: https://github.com/philpep/testinfra/blob/2.0.0/CHANGELOG.rst
PR: 236720
Approved by: maintainer timeout (15d) |
1.17.0
20 Oct 2018 19:49:27
|
sbz |
- Update to 1.17.0
PR: 232467
Submitted by: matthew |
1.14.1
16 Aug 2018 05:41:11
|
matthew |
update to 1.14.1
PR: 230644
Approved by: sbz (maintainer)
Differential Revision: https://reviews.freebsd.org/D16717 |
1.10.1
20 Jun 2018 17:05:44
|
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
1.10.1
20 Jan 2018 19:54:39
|
sbz |
- Update to 1.10.1 |
1.8.0
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
1.8.0
30 Sep 2017 15:37:11
|
sbz |
Testinfra test your infrastructures.
With Testinfra you can write unit tests in Python to test *actual state* of
your servers configured by management tools like Salt, Ansible, Puppet,
Chef and so on.
Testinfra aims to be a Serverspec equivalent in python and is written as
a plugin to the powerful Pytest test engine.
WWW: https://github.com/philpep/testinfra |
As an Amazon Associate I earn from qualifying purchases.