Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby

Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk

Notable changes are.

- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
  USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.

This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863

I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.

Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D37925

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

Remove # $FreeBSD$ from Makefiles.

Fix breakage after r524697

- Change RUN_DEPENDS from rubygem-rubyzip to rubygem-rubyzip13
- Bump PORTREVISION for dependency change

Update version requirement of RUN_DEPENDS

Update to 2.0.5

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

Update to 2.0.4

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

Convert USES=gem:autoplist to USES=gem since autoplist is default

create USES=gem and update rubygem- ports to use it

Note that for now ports still have to have USE_RUBY=yes to use USES=gem

PR:		209041
Differential Revision:	https://reviews.freebsd.org/D6070

devel/ruby-gems: Update to 2.6.2

PR:		208371
Submitted by:	wen (partial)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Fix gemspec for rubygem-rubyzip 1.2.0 update
- Bump PORTREVISION for package change

- Add LICENSE_FILE

- Update to 1.4.9
- Update WWW

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

Set NO_ARCH for remaining rubygem-* ports with no arch dependent files

Obtained from:  DEVELOPER_MODE
With Hat:       ruby@

Sponsored by:   RideCharge Inc / Curb

- Add NO_ARCH

- Update to 1.4.8

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

- Update to 1.4.7

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

- Update to 1.4.5

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

devel/rubygem-warbler: update to 1.4.4

many ruby/rubygem ports: death of rubyforge.org

rubyforge.org shutdown on May 15, 2014. This commit accounts for that by doing
several things:

- Deprecate ruby that had only rubyforge.org as MASTER_SITES (and so are now
  only fetchable via our cache)
- Deprecate ports that depend on those
- Update the WWW pkg-descr line that points to rubyforge.org for rubygem ports
  (which are still fetchable from rubygems.org)

The next step will be to remove rubyforge.org from bsd.sites.mk, after these
deprecated ports are deleted.

Phabric:	D591
With hat:	ruby
Approved by:	portmgr (because of committing to unstaged graphics/mingplot port)

- Update to 1.4.0
- Add LICENSE
- Remove leading indefinite article from COMMENT
- Support STAGEDIR

Changes:	https://github.com/jruby/warbler/blob/master/History.txt

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

- Update to 1.3.8

- Removing remaining MD5 from rubygem- ports

- Fix dependency versions

- Re-assign all my ruby* ports to ruby@

Discussed with: pgollucci, stas

- Mass fixup of WWW: lines pkg-descr based on rubygems.org Homepage meta info

Prompted by:    distilator
With Hat:       ruby@
Sponsored by:   RideCharge Inc. / TaxiMagic

- Fix dependency versions based on rubygems.org

PR:             ports/150816
Submitted by:   pgollucci

RF -> RG Conversion (Part II)

PR:             ports/147844
Submitted by:   pgollucci (myself)
Reviewed by:    portmgr (flz)
Discussed with: portmgr (pav)
Tested by:      make checksum

Feature safe:   yes

- Add missing dependency on devel/rubygem-jruby-jars

Approved by:    tabthorpe, glarkin (mentors, implicit)
Submitted by:   miwi, pav
Pointyhat to:   pgollucci
Feature safe:   yes

- Update to 0.9.14

- Update to 0.9.13

PR:             ports/134679
Approved by:    maintainer timeout (2 weeks)
Submitted by:   me

Change MAINTAINER on my ports to my FreeBSD email address

Approved by:    tabthorpe (mentor)

- convert to RUBYGEM_AUTOPLIST
  remove x-generate-plist and friends
- use RF macro and remove SUBDIR where possible
- remove some uneeded GEM_NAME=${DISTNAME}
  (this c/should be handled better in bsd.*.mk)

other deltas specific to individual ports:
  audio/rubygem-mp3info     - unbreak, fix packaging, bump PORTREVISION
  devel/rubygem-rapt        - adopt
  devel/rubygem-rspec       - remove BUILD_DEPENDS=RUN_DEPENDS -- neither set
  devel/rubygem-ruby2ruby   - add #' for vim highlight
  graphics/rubygem-extifr   - drop PORTREVISION=0
  graphics/rubygem-gd2      - add #' for vim highlight
  www/rubygem-rubyfulsoup   - swap GEM_NAME / DISTNAME for constistency

Sponsored by:   RideCharge Inc.
Tested on:      RideCharge's Tinderbox
Reviewed by:    stas

- Update to 0.9.12

PR:             129834
Submitted by:   Alexander Logvinov <ports at logvinov.com> (maintainer)

- Update to 0.9.11

PR:             ports/127737
Submitted by:   maintainer (Alexander Logvinov)

Warbler is a gem to make a .war file out of a Rails project. The intent is
to provide a minimal, flexible, ruby-like way to bundle up all of your
application files for deployment to a Java application server.

Warbler provides a sane set of out-of-the box defaults that should allow
most Rails applications without external gem dependencies
(aside from Rails itself) to assemble and Just Work.

Warbler bundles JRuby and the JRuby-Rack servlet adapter for
dispatching requests to your application inside the java application server,
and assembles all jar files in WARBLER_HOME/lib/*.jar into your application.
No external dependencies are downloaded.

WWW: http://caldersphere.rubyforge.org/warbler/

PR:             ports/126327
Submitted by:   Alexander Logvinov <ports at logvinov,com>