Number of commits found XX: 46

Update to 1.5.0

- Remove PROJ option

Changes:	http://shapelib.maptools.org/release.html

Update MASTER_SITES

Update to 1.4.1

- Add LICENSE_FILE
- Change PORTDOCS=* to PLIST entries

Changes:	http://shapelib.maptools.org/release.html

- Update to 1.4.0
- Use PORTDOCS
- Update pkg-descr
- Bump PORTREVISION for dependent ports

Changes:	http://shapelib.maptools.org/release.html

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Convert to new options target helper

- Simplify Makefile

- Update graphics/proj to 4.9.1
- Bump PORTREVISION to chase the update of proj

PR:		200434
Submitted by:	wen@(myself)
Approved by:	maintainer(timeout, >20 days)

- Don't install static libraries with INSTALL_LIB (part 2/2)

Approved by:	portmgr blanket
MFH:		2015Q2

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

(Only the first 15 lines of the commit message are shown above )

- Restore %%ENDIAN%% which was accidentally removed in r288687
- Remove unnecessary %%LIBTOOL%% substitution

PR:		ports/186583
Submitted by:	tijl

- Support STAGEDIR
- Convert to new options helper
- Convert to new LIB_DEPENDS format
- Remove DEBUG option

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

- Add LICENSE

- Convert to new options framework
- Cleanup Makefile header

- Update to 1.3.0
- Update endian check
- Cleanup Makefile

Changes:

2012-01-27:
- shptree.c: optimize quadtree generation (gdal #4472)

2012-01-2:
- shpopen.c: fix memory leaks on failure to open .shp file

2011-12-11:
- shptree.c,h: Use SAHooks for .qix access (gdal #3365)

2011-09-14:
- shpopen.c: fix missing cast (#2344)

- Update to 1.3.0b3

Changes:

2011-07-24:
- shpopen.c, dbfopen.c, shptree.c, shapefil.h: Minimize use of CPL services in
  favor of SAHooks.Error().
- Makefile: Remove all the shared library building stuff, it is just too half
  assed, and results in all sorts of bug reports and complaints. Instead just
  install a static libshp.a.

2011-07-23:
- Makefile: build shpdumptree as part of all target (#1648).
- shpopen.c: fix memory leaks in error cases (#2061)
- contrib/*.c: Include stdlib.h and strings.h (#2146)

(Only the first 15 lines of the commit message are shown above )

- Change OPTIONS: PROJ4 -> PROJ

Sync to new bsd.autotools.mk

- Use LOCAL/sunpoet as backup MASTER_SITES

Approved by:    pgollucci (mentor)

- Update MAINTAINER to my FreeBSD.org address

Approved by:    pgollucci (mentor)

- Update to 1.3.0b2
- Add category: geography
- Add option: DEBUG
- Simplify patches
- Sort pkg-plist

PR:             ports/146200
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net> (maintainer)

- Update to 1.3.0b1

PR:             ports/141953
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net> (maintainer)

- Chase graphics/proj shlib bump

- Mark MAKE_JOBS_UNSAFE

Reported by:    pointyhat

- Update to 1.3.0a2

PR:             138558
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net> (maintainer)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Pass maintainership to submitter
- Make use of shapelib utils

PR:             ports/120300
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet at IRIS dot sunpoet dot net>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Remove USE_REINPLACE from all categories starting with D

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

change the libtool version to use from 1.3 to 1.5

Fix download URL

- Chase download location

Sync with new bsd.autotools.mk

- Fix MASTER_SITES

PR:             ports/66693
Submitted by:   Roman Neuhauser <neuhauser@chello.cz>

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Upgrade to 1.2.10.

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

De-pkg-comment.

Reset undeliverable maintainer addresses to ports@FreeBSD.org

USE_LIBTOOL -> BUILD_DEPENDS=libtool:... just as I had it the first time  
around.  This fixes the breakage introduced in rev 1.2.    

Replace explicit build dependency on libtool with USE_LIBTOOL knob    

- Respect CFLAGS;   - don't install .la file - it doesn't serve any purpose;   -
sort PLIST.    

Add shapelib 1.2.8, a C API for reading and writing ArcView Shapefiles.    

Number of commits found XX: 46

16 vulnerabilities affecting 89 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-08-11 20:32:11