*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

devel/libgit2: bump all ports depending on libgit2 for 1.7.1 upgrade

Bump ports with dependency to libgit2

See f11ed41604723ab3c75c6a108850858b7efd4f10

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

editors/gedit-plugins: Remove old gschema file

PR:		267721
Reported by:	alt2600

editors/gedit-plugins: Update to 43.1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

framework: switch tree to using vala.mk

PR:		249940

editors: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohout <shanee@augusta.de>
  *  Andrej Zverev <az@inec.ru>
  *  Andrey Zakhvatov
  *  Anton Tornqvist <antont@inbox.lv>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Bob Eager <bob@eager.cx>
  *  Chris D. Faulhaber <jedgar@fxp.org>

editors/gedit-plugins: Update to 42.1

editors/gedit-plugins: Update to 42.0

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

editors/gedit-plugins: Update to 41.0

editors/gedit-plugins: unbreak build with Meson 0.61.0

plugins/bookmarks/meson.build:43:0: ERROR: Function does not take positional
arguments.

PR:		260943
Reported by:	antoine (via exp-run)
Regressed by:	https://github.com/mesonbuild/meson/commit/61f2866a9fa1

*/*: bump ports depending on libgit2

editors/gedit-plugins: fix fetching from MASTER_SITES

PR:	256202

editors/gedit-plugins: Update to 40.1

Remove # $FreeBSD$ from Makefiles.

Update libgit2 to 1.1.0.
This update is also required for www/gitlab-ce 13.10 upgrade.

Changelog:
https://github.com/libgit2/libgit2/releases/tag/v1.1.0

PR:		252098

editors/gedit-plugins: remove no longer used zeitgeist dependency

the gedit zeitgeist integration is gone since 3.36.0:
	https://gitlab.gnome.org/GNOME/gedit-plugins/-/commit/5953e917f3b90cb60d3037bc804d0dbcf4109c1a

PR:		251637
Reported by:	Greg V <greg@unrelenting.technology>

editors/gedit, editors/gedit-plugins: update to 3.38.1

Upgrade gedit and its plugins to 3.38

as gedit requires a newer version of tepl
upgrade tepl to 5.0.0
And because the only consumer of the previous version was gnome-latex,
Upgrade it to 3.38.0

devel/libgit2: Update to 1.0.0

Changes:	https://github.com/libgit2/libgit2/releases/tag/v1.0.0
ABI:		https://abi-laboratory.pro/tracker/timeline/libgit2
Approved by:	mfechner (maintainer)
Differential Revision:	https://reviews.freebsd.org/D24471

Clean up depends

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Clean up plist

Bump revision to make sure port is build against new libgit2 version 0.28.1.

PR:		236801
Reported by:	jbeich

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.

The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/

Thanks to Antoine Brodin for running the exp-runs.

PR:		229761

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

- Update to 0.50.3

PR:		227981
Submitted by:	danilo
Approved by:	maintainer timeout (gnome, 1 month)

Fix build on ppc64 by specifying what is needed from the compiler.

PR:		225635
Submitted by:	jhibbits
Approved by:	maintainer timeout

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Add more PLIST_SUB to Mk/Uses/python.mk

- Add PYTHON_PYOEXTENSION and PYTHON_SUFFIX
- Add PYTHON2 and PYTHON3
- Respect PYTHON_VERSION
- Rename PYOEXTENSION to PYTHON_PYOEXTENSION

This change would help:
- Build databases/postgresql*-plpython with Python 3
  (It has PLIST issue since bsd.python.mk to Uses/python.mk transition)
- Simplify Makefile

PR:		205807
Differential Revision:	https://reviews.FreeBSD.org/D4758
Exp-run by:	antoine

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Fixup some whitespace at the beginning of lines problems.

With hat:	portmgr
Sponsored by:	Absolight

editors/gedit: actualize descriptions

Update some 2's with 3's. Non-functional change

With hat:       gnome

editors/gedit: fix packaging with Python 3.5

This simple change fixes packaging of editors/gedit and editors/gedit-plugins
when Python 3.5 are default python3 version.

PR:		207241
With hat:   gnome

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

Let gnome3 stack be built with python 3.5

This mostly fixing packaging for python3.5, but there is
also py35 waf fix for py3-cairo, that was obtained from Ubuntu
repository.

PR:		204075
Approved by:	maintainer timeout (22 days)

Chase libgit2-glib update.

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

* Split off the python bindings from the main libpeas port.
* This allows use to supply both python bindings. Update libpeas using
  ports for this change.
* Assign maintainership to gnome@

Obtained from:	GNOME devel repo

Switch default python3 version from 3.3 to 3.4.
Bump PORTREVISIONs for the affected ports.

Exp-run by:	antoine

Don't hardcode python version.

While here:
Add vala as build depend to gedit.
Gedit-plugins: builds vte3 and gucharmap bindings. Register the depends
and package the files.

PR:		196618
Submitted by:	python3 default to 3.4 exp-run (via antoine@)

Update GNOME to 3.14.2.

This update was brought to you in collaboration with Gustua Perez

Make sure gtk30 pulls it the default theme (adwaita-icon-theme).
Update the extra gnome-shell-extensions so they work with gnome-shell 3.14.
Drop metacity from gnome3 meta-port.
Remove the gtile gnome-shell extension since it proven to be buggy.

Exp-run done by antoine@ for gdk-pixbuf2 deprecated API.

PR:		195414
Obtained from:	gnome dev repo

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

Cleanup plist

- Convert ports from dns/, editors/ and emulators/ to new
  USES=python

Approved by:	portmgr (implicit)

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)

Add an explicit dependency on pkgconf

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Convert almost all gnome@ ports to OptionsNG, trim header, use USES=pathfix
instead of gnomehack and pet portlint.
Add conflicts with future gnome3 versions.

Reviewed by:	miwi, bapt

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Update to 2.26.3.

Update to 2.26.2.

Update to 2.26.1.

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Add a missing dependency, gnome-vfs2. Bump the PORTREVISION.

Reported by:    pointyhat via pav

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 2.22.2.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 2.22.1

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.18.0

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Fix plist to fix packaging on sparc64.

Reported by:    pointyhat via kris

Fix the build on sparc64 by using a correct sed regular expression for
matching spaces.

Reported by:    pointyhat via kris
Approved by:    portmgr (implicit)

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

Delete gedit-plugins since this code is no longer maintained, and has
succumbed to code rot.

Fix unresolved symbols in the "ASCII table", "Compare Files" and "CVS
ChangeLog" plugins.

PR:             ports/87778
Submitted by:   Denis Eremenko <moonshade@pnhz.kz>

- Update or add WWW: lines

-Fix the build with gedit 2.10.
-Change libtool from 1.3 to 1.5 and remove the lthack.

Reported by:    pointyhat via krion

Bump PORTREVISION to chase the glib20 shared lib version change.

- Move editors/gedit2 to editors/gedit

Chase the gedit update.

Reported by:    pointyhat via kris

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Fix some known compatibility problems with GNOME 2.6.

- Add SIZE to GNOME ports

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)