21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

emulators: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alejandro Pulver <alejandro@varnet.biz>
  *  Alexander Best <arundel@gmx.net>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Antipovsky <kemm@in-line.ru>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Brian Gaeke <brg@dgate.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Eric L. Hernes <erich@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  Gerald Pfeifer <gerald@FreeBSD.org>
  *  Gunter Wambaugh <techgunter@yahoo.com>
  *  Jacques Vidrine <nectar@FreeBSD.org>
  *  Janni
  *  Jeffrey H. Johnson <CPE1704TKS@bellsouth.net>
  *  Jeremy Karlson
  *  Jeroen Ruigrok van der Werven <asmodai@FreeBSD.org>
  *  Joel Sutton <jsutton@webnet.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jonathan M. Bresler (jmb)
  *  Jose Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Kaltashkin Eugene <zhecka@gmail.com>
  *  Kevin Bowling <kbowling@FreeBSD.org>
  *  Li-Lun Wang <llwang@infor.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Martin Hinner
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Miguel Mendez <flynn@energyhq.homeip.net>
  *  Naram Qashat <cyberbotx@cyberbotx.com>
  *  Nicole Reid <root@cooltrainer.org>
  *  Nishika <nishika@cheerful.com>
  *  Pavel I Volkov <pavelivolkov@googlemail.com>
  *  Piotr Kubaj
  *  Ruan Wei (iamayan@gmail.com)
  *  Sebastian Schuetz <sschuetz@fhm.edu>
  *  Seiichirou Hiraoka
  *  Shaun Amott <shaun@FreeBSD.org>
  *  Sheldon Hearn <axl@iafrica.com>
  *  Simon Dick <simond@irrelevant.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Stijn Hoop <stijn@win.tue.nl>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Bernard <nanard@free.fr>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Tobias Reifenberger <tr@freebsd.mayn.de>
  *  Tom Carrick <knyghtmare@knyghtmare.com>
  *  Travis Poppe <tlp@liquidx.org>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Vladimir Kondratiev <wulf@mail.mipt.ru>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  alepulver
  *  alex
  *  dchapes@ddm.on.ca
  *  dk
  *  elbarto
  *  janek@gaja.ipan.lublin.pl
  *  jhb
  *  jmz
  *  joerg
  *  jraynard
  *  krion
  *  kstailey
  *  mbr@FreeBSD.org
  *  okeeblow <root@cooltrainer.org>
  *  pixel
  *  pjm
  *  tenser@spitfire.ecsel.psu.edu
  *  trasz
  *  trasz <trasz@pin.if.uz.zgora.pl>
  * # Created by Timothy Beyer <beyert@cs.ucr.edu>

With hat:	portmgr

    27eb52a

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

08:40 mat 

Remove all := from BUILD_DEPENDS, here are never needed.

While there, cleanup, and sort depends.

When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS.  In order of preference, they are:

1) use RUN_DEPENDS to set BUILD_DEPENDS:

BUILD_DEPENDS=	${RUN_DEPENDS}
RUN_DEPENDS=	foo:bar/baz

2) create another variable and use it:

MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS=	${MY_DEPENDS}
RUN_DEPENDS=	${MY_DEPENDS}

3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:

BUILD_DEPENDS=	foo:bar/baz
RUN_DEPENDS:=	${BUILD_DEPENDS}

Sponsored by:	Absolight

 

08:58 mat 

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

19:55 sunpoet 

- Fix *_DEPENDS: version is already in all supported Perl releases
- Add LICENSE [1]
- Use single space after WWW:
- Bump PORTREVISION for dependency change

Approved by:	portmgr (blanket) [1]
With hat:	perl

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

14:42 miwi 

- Stage support

 

16:43 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
emulators)

 

19:02 az 

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

 

19:09 skreuzer 

Update to 0.77

 

15:35 skreuzer 

Imagine this nightmare scenario: your boss tells you about a legacy system you
have to support. How bad could it be? COBOL? Fortran? Worse: it's an embedded
6502 system run by a family of squirrels. Fortunately there's a pure Perl 6502
emulator that works so well the squirrels will never know the difference.

WWW:    http://search.cpan.org/dist/Acme-6502/