13:45 miwi 

2011-07-01 math/femlab: No more distfile, looks like abandonware
2011-07-01 japanese/wikicker: Looks like an abandonware
2011-07-01 emulators/vmware3: No more distfiles available.
emulators/virtualbox-ose can be used as a replacement

12:45 bapt 

Deprecate vmware3 no more distfiles available, consider using virtualbox-ose
instead

Suggested by:   decke@

15:08 ehaupt 

Unify maintainer address for emulation ports.
(freebsd-emulation@FreeBSD.org -> emulation@FreeBSD.org)

Discussed with: netchild (emulation)

04:40 bland 

Add ports with kernel modules to 'kld' virtual category.

PR:     137823

17:28 bsam 

Welcome to the new linux ports infrastructure which allows using
both current (fc4) and future linux (f8) distributions at one
ports tree.

The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.

The idea was taken from bsd.gnome.mk and others.

More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.

Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.

Other changes are coming. Stay tuned!

PR:             ports/132510
Submitted by:   bsam (me)
Exp-run by:     portmgr (pav)

19:44 pav 

- Remove conditional checks for FreeBSD 5.x and older

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

14:04 bsam 

Unbreak compiling at FreeBSD-7.x. The port seems to work only with
an UP kernel.

PR:             117350
Submitted by:   Yi Wang <wangyi6854 at gmail.com>
Patch by:       fchang at cs.ubc.ca
Tested by:      Yi Wang <wangyi6854 at gmail.com>

00:13 linimon 

Attempt to unbreak index by removing code block that used to be associated
with pre-fetch target.  While here, remove some more remnants of support
for antique FreeBSD versions.

Hat:            portmgr

12:25 edwin 

[PATCH] emulators/vmware3: cleanup non-supported FreeBSD versions

        Cleanup non-supported FreeBSD versions

PR:             ports/112355
Submitted by:   "R.Mahmatkhanov"<R.Mahmatkhanov@SKYLINK.ru>
Approved by:    maintainer timeout

23:51 linimon 

Reset maintainer who did not respond to email the last time I checked.
Reassign to the emulation mailing list.

Hat:            portmgr

20:13 itetcu 

Fix check for kernel sources.

PR:             ports/96543
Submited by:    Alexandr Kovalenko <never@nevermind.kiev.ua>,
                the patch commited: from maintianer.

07:25 lawrance 

Add SHA256 checksums.
Make use of SUB_FILES.
Use REINPLACE_CMD instead of perl.
Miscellaneous other cleanups.

PR:             ports/96491
Submitted by:   edwin
Approved by:    orlando@break.net (maintainer, timeout 2 weeks)

22:23 edwin 

[UPDATE]: emulators/vmware3 - Various fixes and solution to crashes.

        I've discovered that the instant freezes when clicking
        'Power On' can be fixed by disabling APIC support. ACPI
        support, on or off, didn't seem to solve anything. I'd like
        to know whether or not disabling ACPI has actually helped
        anyone at all, as it could be removed from the pkg-message
        if not.

        I've reflected this in a completely re-worked, step-by-step,
        more clear pkg-message file.
         I've also added a wrapper script for the vmware wizard,
         mentioned it in the pkg-message, and fixed various portlint
         complaints.

         For some reason, the wizard cannot be launched from within
         VMware itself. I have no idea as to what causes this.

PR:             ports/92871
Submitted by:   Travis Poppe <tlp@liquidx.org>

10:14 silby 

With a serious of very ugly hacks, make FreeBSD 6 support work again
for the vmware3 port.

Very little testing done, but at least it builds and starts a VM now.

Debugging helped along by: ssouhal & Devon O'Dell

08:49 silby 

Correct dependency on rtc - it has resided in /dev/rtc instead of
/usr/compat/linux/dev/rtc for quite some time now.

No need for a port version bump.

08:45 silby 

Fix installation of 001.vmware.sh

PR:             75748
Submitted by:   Per Hedeland

08:27 silby 

Fix last commit, make the fetch actually work.

04:19 silby 

Add a working site to fetch the tar.gz from.  No version bump
because there were no other changes.

22:59 netchild 

Mega-patch to cleanup the ports infrastructure regarding our linux bits:
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not neccesary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
    instead of a hardcoded reference.
  - Change all ports to comply to the "new world order".
  - The Ports Collection now allows to override the default linux_base port.
    Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
    ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
    ${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
  - If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
    port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
    be marked as IGNORE. [1]
  - Readd USE_LINUX knobs into several ports and make several uses of a
    conditional dependency ("USE_LINUX?=") into an unconditional one
    ("USE_LINUX=") which where removed/changed by Trevor to allow the use of
    alternative linux_base ports. While this is a nice goal, the implementation
    resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
    in this commit is supposed to fix the problem while keeping the feature.
    Basicaly this includes a backout of Trevor's commit, to prevent confusion
    I mention it here explicitely.
  - Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
    Chase dependencies for this.
  - Changes to make linux_devtools installable on amd64, remove some stray
    device nodes (they don't work on recent OS versions and aren't really
    needed).
  - Make linux_base-8 PREFIX clean and remove some stray device nodes.
    Additionally tell a little bit more about how to setup NIS/YP [2].
  - Update the PGSQL dependency in the linux-opengroupware port to a recent
    version (the old one isn't available anymore), I don't know if this
    works (at least it isn't more broken than before).
  - Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
    ports, the former path exists already and gets populated by other
    packages too (PREFIX=LINUXPREFIX!).
  - Fix some obvious (non-linuxolator) bugs in some linux ports while being
    there.
  - Bump PORTREVISION where neccesary.

Requested by:   portmgr (linimon) [1]
Submittted by:  Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by:    portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on:      ports cluster (kris)
Reviewed by:    silence on emulation@
Superseedes PR: 69997

Maintainer approval from:
        chris@chrisburkert.de
        cracauer@cons.org
        des
        girgen
        jamie@bishopston.net
        mezz
        mi
        nivit@users.sf.net
        pat
        simond@irrelevant.org
        riggs@rrr.de
        Udo.Schweigert@Siemens.com

21:51 trevor 

Respect the user's USE_LINUX setting.

14:37 vs 

Update MASTER_SITES:
vmware.wespe.de seems to be dead for quite some time now.

PR:             ports/75679
Submitted by:   "edini"
Approved by:    maintainer timeout

18:24 netchild 

Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.

It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).

This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).

Changes:
 - change the default linux_base from v7 to v8
 - add a newer freetype to linux_base-8 for nicer fonts display [1]
 - don't let cpio use hardlinks in the linux_base-8 port to quiet some
   warnings in some cases [2]
 - fix a cut&past error in the linux_base-8 pkg-install script [3]
 - convert the binary knob "USE_LINUX" to a version specifier, e.g.
   USE_LINUX=<value> specifies a dependency upon
   emulators/linux_base-<value>, exceptions are a value of "7" (which
   does what you want and adds a dependency to linux_base) and any
   value without a corresponding port in
   PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
   the default linux_base)
 - don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
   this allows us to use the USE_LINUX_PREFIX knob for linux_base and
   paves the way for splitting up future linux base ports into
   individual pieces
 - remove RESTRICTED from some GPL licensed ports, even when we only
   distribute binaries, we get them from official linux sites, so
   anyone can grab them there if he needs to
 - add a dependency upon the linux X11 bits where necessary (based upon
   guesswork)
 - don't use USE_X_PREFIX in some linux ports since it adds a dependency
   to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
   solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
 - bump the portrevision of the linux ports ("better safe than sorry"
   algorithm)
 - pass maintainership of the important linux infrastructure to a
   mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
   doesn't like this: tell us your bikeshed color at freebsd-emulation@,
   my color would be "linuxolator@" in case someone cares...)
 - add a pkg-install script for linux-fontconfig, but don't use it;
   everything should work without it (the FreeBSD fc-cache program should
   do all the work), but in case we need it we just need to decomment the
   pkg-install part in the Makefile
 - fix some dependencies
 - fix some bugs
 - add some static plists
 - unbreak the ports with dependecies to more than one linux_base

This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.

Known bugs:
 - the linux-mesa and linux-devtools ports install libGL*.so symlinks
 - some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
   the linux X11 port, so linx_Base-8 moans at deinstall time)

Future work (interested souls should coordinate with freebsd-emulation@):
 - add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
   or modify the behavior of USE_XLIB in the USE_LINUX case
   AFAIK trevor has some patches.
 - make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
   the PREFIX?= workaround in some linux ports
   Should be discussed/coordinated on/with x11@.
 - move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
 - update to a more recent linux base

PR:                     69997, 70539 (and maybe others)
Discussed with/on:      java@, x11@, trevor, portmgr
Tested by:              mezz, portmgr, pointyhat
RPM hunted down by:     Joseph Gelinas <scirocco@tasam.com> [1]
Requested by:           portmgr [2]
Submitted by:           kris [3]
Approved by:            portmgr

02:24 edwin 

Make portlint happy

PR:             ports/69041
Submitted by:   Wesley Shields <wxs@csh.rit.edu>

22:24 silby 

Orlando's latest changes (see changelog file for details.)

08:26 silby 

Latest update from Orlando Bassotto, includes better
network support.

07:56 silby 

Fix a comparison that was giving false "you need a patch" messages
on 4.x systems.  No need for port revision bump.

23:35 edwin 

Renamed etc/rc.d/vmware.sh into etc/rc.d/001.vmware.sh to make sure
it is started before any other programs which require the vmnet
interface (like isc-dhcp etc)

Approved by:    orlando.bassotto@ieo-research.it (via email)

21:29 silby 

A slew of changes to allow vmware3 to work on 5.x with dynamic device
numbering while not breaking 4.x compatibility:

- Stop using device nodes in /usr/compat/linux/dev and instead rely
on the linuxaltor passing though to /dev
- Create needed device nodes in /dev (on 4.x)
- Account for a change in falloc's semantics that was preventing
the vmmon module from being unloaded on 5.1+ machines.

10:12 mbr 

Fix the cdev patch to work correctly with FreeBSD4. One check has
been wrong.

Bump portrevision.

14:54 mbr 

Portepoch should never be decreased.

Noticed by:     kris

10:32 mbr 

Add patch for new cdevsw changes and make vmware working again
with latest CURRENT.

22:40 silby 

Bump the port revision to note the vm_page_alloc_contig -> contigalloc
change which is required for 5.x systems.

22:10 silby 

Make the linprocfs check succeed if linprocfs is already mounted, and
make the error message (hopefully) more descriptive.

07:18 marcus 

Substitute BROKEN with IGNORE in cases where the port requires the src tree
to be present, or does not compile on certain versions of FreeBSD.  This
will potentially avoid needless compilations on bento, and has the added
benefit of improving certain reporting tools.  To most users, this change
is a no-op.

PR:             61090
Submitted by:   linimon

15:35 fjoe 

Fix build on 4.x.
Bump PORTREVISION.

12:59 mr 

vmware3 was broken on -current due to kernel changes.
Fix this by updating to new vmmon module version.

PR:             ports/59405
Submitted by:   Orlando Bassotto <orlando.bassotto@ieo-research.it

13:49 fjoe 

kern.ipc.shm_allow_removed was MFC'ed.

01:40 fjoe 

Patch for FreeBSD 4.x was updated (now Power On always works as expected).
Point to new patch location.
Document sysctl kern.ipc.shm_allow_removed which should be set to 1
in order to run vmware3.

16:50 fjoe 

Finally fix problems with libdir: install vmware3 files to correct location
(maintainer timeout).

12:56 knu 

Compensate a versioning mistake with a PORTEPOCH bump, since this port
is previously vmware3-3.2.1 version 2242 instead of vmware3 version
3.2.1-2242 and now it is vmware3 version 3.2.1.2242, which is
obviously and annoyingly smaller than 2242.

Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

18:22 knu 

PORTREVISION may not contain a hyphen.

16:11 fjoe 

Port to FreeBSD 4.x.

13:36 mbr 

Upgrade to portrevision 2242 and make it possible to run
multiple vm's running at the same time.

Submitted by:   Orlando Bassotto <orlando.bassotto@ieo-research.it>

21:49 fjoe 

Add ftp:// so fenner's "Distfiles survey" does not fail
with "unknown url type" error.

00:59 anders 

Make vmware3 fetchable.

Approved by:    bento

19:43 mbr 

VMware-workstation-3.2.0-2230.tar.gz has disappeared everywhere on the
mirrors. Replace it with VMware-workstation-3.2.1-2237.tar.gz and fix the
patchset to work with this version.

Only issue a warning about needed system shm-patches if we are running a
old CURRENT.

12:36 mbr 

Use LINUXBASE where it is possible. Do not install into /etc
directly.

Submitted by:   Munehiro Matsuda <haro@kgt.co.jp>

22:55 mbr 

Install even more missing files. Bump portrevision.

22:38 mbr 

Add missing files and make needed symlink.

Submitted by:   Orlando Bassotto <orlando.bassotto@ieo-research.it>

16:24 mbr 

Orlando does care now. I'll commit the changes for him.

02:59 mbr 

Initial commit of vmware 3.2.0. This first version is CURRENT 5.x
only.

17:52 mbr 

Fix broken mastersites.

17:25 mbr 

Mark this broken until I have committed the updated patches.