| Port details |
- py-parfive HTTP and FTP parallel file downloader
- 2.1.0 ftp
 =2      2.1.0Version of this port present on the latest quarterly branch. - Maintainer: wen@FreeBSD.org
- Port Added: 2023-04-23 13:12:08
- Last Update: 2024-04-10 08:08:25
- Commit Hash: 228f6aa
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- License: MIT
- WWW:
- https://github.com/Cadair/parfive
- Description:
- A parallel file downloader using asyncio. parfive can handle downloading
multiple files in parallel as well as downloading each file in a number
of chunks.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}parfive>0:ftp/py-parfive@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/ftp/py-parfive/ && make install clean
- To add the package, run one of these commands:
- pkg install ftp/py-parfive
- pkg install py39-parfive
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-parfive listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-parfive
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1712735407
SHA256 (parfive-2.1.0.tar.gz) = cd6cb419242130730cf41d4cf6f284ebf50f1a71ce6c9508e0467ec98f17dc8e
SIZE (parfive-2.1.0.tar.gz) = 33956
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>0 : devel/py-setuptools@py39
- py39-setuptools-scm>=0 : devel/py-setuptools-scm@py39
- py39-wheel>=0 : devel/py-wheel@py39
- python3.9 : lang/python39
- py39-build>=0 : devel/py-build@py39
- py39-installer>=0 : devel/py-installer@py39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-tqdm>0 : misc/py-tqdm@py39
- py39-aiohttp>0 : www/py-aiohttp@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- astro/py-sunpy
Configuration Options:- No options to configure
- Options name:
- ftp_py-parfive
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Number of commits found: 5
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.1.0
10 Apr 2024 08:08:25
 |
Wen Heping (wen) |
ftp/py-parfive: Update to 2.1.0 |
2.0.2
29 Feb 2024 07:18:32
|
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
2.0.2
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.0.2
23 Apr 2023 13:18:02
|
Wen Heping (wen) |
ftp/py-parfive: Remove unneeded file, which added in previous commit by mistake. |
2.0.2
23 Apr 2023 13:10:22
|
Wen Heping (wen) |
ftp/py-parfive: Add new port
A parallel file downloader using asyncio. parfive can handle downloading
multiple files in parallel as well as downloading each file in a number
of chunks. |
Number of commits found: 5
|
As an Amazon Associate I earn from qualifying purchases.