notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)

Current status

The server has been repaired, with a new power supply, for $23. I am waiting for lower COVID rates before visiting the datacenter to return it.
non port: games/poker-engine/Makefile
SVNWeb

Number of commits found: 36

Sun, 15 Sep 2019
[ 17:28 antoine ] Original commit   Revision:512125(Only the first 10 of 354 ports in this commit are shown above. View all ports for this commit)
Deprecate a few ports
Sun, 4 Aug 2019
[ 11:43 antoine ] Original commit   Revision:508089(Only the first 10 of 42 ports in this commit are shown above. View all ports for this commit)
Mark BROKEN: unfetchable
Wed, 20 Jun 2018
[ 17:05 mat ] Original commit   Revision:472884(Only the first 10 of 1617 ports in this commit are shown above. View all ports for this commit)
Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight
Mon, 19 Feb 2018
[ 11:10 antoine ] Original commit   Revision:462307(Only the first 10 of 442 ports in this commit are shown above. View all ports for this commit)
Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA
Thu, 30 Nov 2017
[ 15:50 mat ] Original commit   Revision:455210(Only the first 10 of 2423 ports in this commit are shown above. View all ports for this commit)
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 21 Oct 2016
[ 15:21 mat ] Original commit   Revision:424427(Only the first 10 of 354 ports in this commit are shown above. View all ports for this commit)
Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093
Fri, 1 Apr 2016
[ 14:00 mat ] Original commit   Revision:412346(Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Tue, 12 Jan 2016
[ 16:20 amdmi3 ] Original commit   Revision:405891(Only the first 10 of 791 ports in this commit are shown above. View all ports for this commit)
Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket
Mon, 8 Dec 2014
[ 18:40 amdmi3 ] Original commit   Revision:374309
- Clarify LICENSE
- Pet portlint
- Drop @dirrm* from plist
Fri, 31 Oct 2014
[ 16:11 amdmi3 ] Original commit   Revision:371872(Only the first 10 of 159 ports in this commit are shown above. View all ports for this commit)
- Release ports maintained by games@

games@ team is quite small and inactive, so ports currently assigned
to it cannot be assumed as properly maintained. To not cause confusion
by making it look otherwise, and also to allow and promote adoption
by individual maintainers, release these ports back to the pool. Note
that this does not change the fact that games@ team still takes care
of these ports to excent of its capabilities.

Suggested by:	marino
Mon, 20 Oct 2014
[ 17:36 mva ] Original commit   Revision:371287(Only the first 10 of 41 ports in this commit are shown above. View all ports for this commit)
- Convert games/ to new USES=python

Approved by:	portmgr (implicit)
Mon, 4 Aug 2014
[ 15:28 amdmi3 ] Original commit   Revision:364021
- Pass maintainership to games@
Wed, 25 Jun 2014
[ 05:35 bapt ] Original commit   Revision:359185(Only the first 10 of 304 ports in this commit are shown above. View all ports for this commit)
Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends

With hat:	portmgr
Wed, 16 Apr 2014
[ 18:28 zeising ] Original commit   Revision:351411(Only the first 10 of 1008 ports in this commit are shown above. View all ports for this commit)
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 13 Jan 2014
[ 21:00 rene ] Original commit   Revision:339634(Only the first 10 of 702 ports in this commit are shown above. View all ports for this commit)
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)
Tue, 5 Nov 2013
[ 01:06 danilo ] Original commit   Revision:332798
- Add stage support
- Convert USE_GMAKE to USES
Fri, 20 Sep 2013
[ 17:36 bapt ] Original commit   Revision:327730(Only the first 10 of 1149 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
games)
Wed, 14 Aug 2013
[ 22:35 ak ] Original commit   Revision:324744(Only the first 10 of 1725 ports in this commit are shown above. View all ports for this commit)
- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)
Wed, 24 Apr 2013
[ 07:35 ak ] Original commit   Revision:316407(Only the first 10 of 164 ports in this commit are shown above. View all ports for this commit)
- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)
Tue, 23 Apr 2013
[ 10:47 bapt ] Original commit   Revision:316343(Only the first 10 of 84 ports in this commit are shown above. View all ports for this commit)
Convert g* to USES=pkgconfig
Thu, 3 Jan 2013
[ 00:35 jgh ] Original commit   Revision:309851
- trim historical header
- tighten COMMENT
Thu, 26 Jul 2012
[ 05:40 bapt ] Original commit (Only the first 10 of 158 ports in this commit are shown above. View all ports for this commit)
new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility

This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG

it can take the following arguments:
 - yes (meaning build only dep)
 - build (meaning build only dep)
 - run (meaning run only dep)
 - both (meaning run and build dep)

From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.

While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config

With Hat:	portmgr
Exp-runs by:	bapt (pointhat-west), beat (pointyhat)
Sun, 22 Jul 2012
[ 23:24 dougb ] Original commit (Only the first 10 of 29 ports in this commit are shown above. View all ports for this commit)
For the ports that are maintained by ports@ that have pkgconfig as their
only USE_GNOME feature, convert to a BUILD_DEPENDS. This avoids both the
bug of the bogus run depend introduced by bsd.gnome.mk, and also avoids
needlessly pulling that file in.
Sat, 21 Jan 2012
[ 17:40 eadler ] Original commit (Only the first 10 of 1326 ports in this commit are shown above. View all ports for this commit)
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr
Wed, 23 Mar 2011
[ 17:43 dhn ] Original commit 
- Update to 1.3.6

PR:             ports/155810
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
Sat, 12 Mar 2011
[ 22:18 pav ] Original commit 
- Mark BROKEN: this depends on py26-poker-eval and py27-libxml2 which will
  clash

Reported by:    pointyhat
Thu, 10 Mar 2011
[ 23:06 pav ] Original commit 
- py-poker-eval is limited to python 2.5-2.6 so limit this too

Reported by:    pointyhat
Fri, 25 Feb 2011
[ 03:19 miwi ] Original commit (Only the first 10 of 99 ports in this commit are shown above. View all ports for this commit)
- Move over to py25 or above
- While here get rid FreeBSD 6.X and md5 support
Sat, 18 Sep 2010
[ 15:58 makc ] Original commit 
Update to 1.3.5

PR:             ports/150674
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>
Sun, 13 Dec 2009
[ 17:00 miwi ] Original commit (Only the first 10 of 57 ports in this commit are shown above. View all ports for this commit)
- Get rip python 2.3+

Note:
Python 2.3 is't longer supported and have a lot of security issues.
Convert 2.3+ to yes/or 2.4/5+

With hat:       portmgr
Mon, 7 Sep 2009
[ 17:17 ijliao ] Original commit 
upgrade to 1.3.4
Sun, 3 May 2009
[ 05:57 itetcu ] Original commit 
Fix plist and bump PORTREVISION.

Prompted by:    QAT
Fri, 1 May 2009
[ 16:43 ijliao ] Original commit 
upgrade to 1.3.3
drop maintainership
Mon, 23 Jul 2007
[ 09:36 rafan ] Original commit (Only the first 10 of 437 ports in this commit are shown above. View all ports for this commit)
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run
Thu, 14 Dec 2006
[ 16:06 ijliao ] Original commit 
update pkg-comment
[ 16:03 ijliao ] Original commit 
add poker-engine
A python library that implements poker rules

Number of commits found: 36