ASCII'ze port descriptions which were (ab)using UTF-8 punctuation

While here, run these files through a spell-checker and wrap some
overly long lines and/or dangling prepositions (when appropriate).

games/renpy: drop maintainership

*/*: Bump all users of multimedia/ffmpeg*

...to make sure all picks up new version(s)

audio/opus: bump consumers after update to 1.4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

games/renpy: remove past expiration date

devel/renpy: update to 7.4.11

Changes:	https://www.renpy.org/release/7.4.11 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-11
Reported by:	Repology

devel/renpy: update to 7.4.10

Changes:	https://www.renpy.org/release/7.4.10 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-10
Reported by:	Repology

devel/renpy: update to 7.4.9

Changes:	https://www.renpy.org/release/7.4.9 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-9
Reported by:	portscout, Repology

devel/renpy: update to 7.4.8

Changes:	https://www.renpy.org/release/7.4.8 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-8
Reported by:	portscout, Repology

devel/renpy: update to 7.4.7

Changes:	https://www.renpy.org/release/7.4.7 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-7
Reported by:	Repology

devel/renpy: update to 7.4.6

Changes:	https://www.renpy.org/release/7.4.6 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-6
Reported by:	portscout, Repology

devel/renpy: update to 7.4.5

Changes:	https://www.renpy.org/release/7.4.5 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-5
Reported by:	Repology

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

devel/renpy: update to 7.4.4

Changes:	https://www.renpy.org/release/7.4.4 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-4
Reported by:	portscout

devel/renpy: update to 7.4.3

Changes:	https://www.renpy.org/release/7.4.3 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-3
Reported by:	Repology

devel/renpy: update to 7.4.2

Changes:	https://www.renpy.org/release/7.4.2 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-2
Reported by:	Repology

devel/renpy: update to 7.4.1

Changes:	https://www.renpy.org/release/7.4.1 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-1
Reported by:	Repology

devel/renpy: update to 7.4.0

Changes:	https://www.renpy.org/release/7.4.0 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-4-0
Reported by:	Repology

Revert r559792 to unbreak INDEX and bulk -a
It seems a lot of reverse dependencies were missed

With hat:	portmgr

Remove most expired ports that depend on Python 2.7:

Exceptions are:
- mail/mailman, our listservers still use it
- www/chromium, solely because of popular demand,
  upstream is (slowly) working on porting it to Python 3
- ports that have actual patches for Python 3 against
  them (Cinnamon and a few unrelated other ports)
- llvm70 and qt5-webengine because they seem to have a lot
  of dependencies which need further analysis
- sysutils/uefi-edk2-bhyve because bhyve seems to use them
- python2 and python27 themselves

I'm sure there will be complaints, but the nice thing about
a version control system is that we can revert and adjust things.

games/renpy: drop slave port hooks after r544927

games/renpy: bump expiration for master port

Upstream is working on Python 3 support for RenPy 7. However, RenPy 6
may need to be retired, so propagate the warning to the only consumer.

Deprecate a few ports

With hat:	portmgr

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

devel/renpy: update to 7.3.5

Changes:	https://www.renpy.org/release/7.3.5 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-3-5
Reported by:	portscout

devel/renpy: update to 7.3.4

Changes:	https://www.renpy.org/release/7.3.4 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-3-4
Reported by:	portscout
MFH:		2019Q4

devel/renpy: update to 7.3.3

Changes:	https://www.renpy.org/release/7.3.3 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-3-3
Reported by:	portscout
MFH:		2019Q4

multimedia/ffmpeg: update to 4.2

Changes:	https://git.ffmpeg.org/gitweb/ffmpeg.git/blob/n4.2:/Changelog
ABI:		https://abi-laboratory.pro/tracker/timeline/ffmpeg/

devel/renpy: update to 7.3.2

Changes:	https://www.renpy.org/release/7.3.2 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-3-2
Reported by:	portscout

devel/renpy: update to 7.3.1

Changes:	https://www.renpy.org/release/7.3.1 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-3-1
Reported by:	portscout

devel/renpy: update to 7.3.0

Changes:	https://www.renpy.org/release/7.3.0 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-3-0

games/renpy: unbreak on armv6 and armv7

In file included from ffmedia.c:13:
/usr/include/malloc.h:3:2: error: "<malloc.h> has been replaced by <stdlib.h>"
 #error "<malloc.h> has been replaced by <stdlib.h>"
  ^

Reported by:	pkg-fallout

devel/renpy: update to 7.2.2

Changes:	https://www.renpy.org/release/7.2.2 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-2-2
MFH:		2019Q2

devel/renpy: update to 7.2.1

Changes:	https://www.renpy.org/release/7.2.1 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-2-1

devel/renpy: update to 7.2.0

Changes:	https://www.renpy.org/release/7.2.0 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-2-0

devel/renpy: update to 7.1.3

Changes:	https://www.renpy.org/release/7.1.3 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-1-3
MFH:		2018Q4

multimedia/ffmpeg: update to 4.1

Changes:	https://git.ffmpeg.org/gitweb/ffmpeg.git/blob/n4.1:/Changelog
ABI:		https://abi-laboratory.pro/tracker/timeline/ffmpeg/

devel/renpy: update to 7.1.1

Changes:	https://www.renpy.org/release/7.1.1 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-1-1
MFH:		2018Q4

devel/renpy: update to 7.1.0

Changes:	https://www.renpy.org/release/7.1.0 (see Announcment)
Changes:	https://www.renpy.org/doc/html/changelog.html#renpy-7-1

Reorganize some my ports for better discoverability

devel/onscripter{,-1byte} -> games/onscripter{,-1byte}
devel/ponscripter-sekai -> games/ponscripter-sekai
devel/renpy{,6} -> games/renpy{,6}
devel/rlvm -> games/rlvm
dns/openmdns -> net/openmdns (where Bonjour and Avahi are)