Alembic is an open computer graphics interchange framework. It distills
complex, animated scenes into a non-procedural, application-independent
set of baked geometric results. This "distillation" of scenes into baked
geometry is exactly analogous to the distillation of lighting and
rendering scenes into rendered image data.
Alembic is focused on efficiently storing the computed results of complex
procedural geometric constructions. It is very specifically NOT concerned
with storing the complex dependency graph of procedural tools used to
create the computed results.
===> The following configuration options are available for alembic-1.8.12:
HDF5=on: HDF-5 data format support
===> Use 'make config' to modify these settings
graphics/alembic: the port had been updated to version 1.8.12
- Stop forcing C++ standard, upstream defaults to C++14 which
is lower than most consumers in the ports
- Replace hand-rolled `do-test' target by USES+=cmake:testing
- Do not build tests unless requested, this cuts down regular
build target count roughly in half
PR: 281999 (second take)
Reported by: portscout
graphics/alembic: unbreak the fetch and drop needless LIB_DEPENDS
- Distfile had been rerolled upstream to remove experimental tweak
that accidentally snuck its way in (diff-verified)
- Do not force linking against `science/libaec' which is not used
directly and could only be pulled via optional `science/hdf5',
where it is also subject to SZIP option
Reported by: vvd, pkg-fallout, Mamoru Iwaki
PR: 282157, 281999 (first take)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
science/hdf5: bump PORTREVISION of consumers
The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .
Reported by: VVD <vvd@unislabs.com>
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above )
*/*: Replace science/szip with science/libaec
- Bump PORTREVISION of dependent ports for dependency change
szip does not allow redistribution in binary form without proper commercial
license. Its LICENSE_PERMS should be set to no-auto-accept which blocks building
this port, therefore building dependent ports are also blocked. Switch all
dependent ports to science/libaec to avoid conflicts and license issue.
PR: 228743, 246097, 250165
*: Bump PORTREVISION for openexr update
OpenEXR's patchlevel updated bumped the major version
of the OpenEXR library, hence bump PORTREVISION of all
ports that require OpenEXR.
graphics/openexr: graphics/ilmbase: v2.5.4 update
"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>
Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>
Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)
MFH: 2021Q1 (this requires discussion by ports-secteam@!)
graphics/ilmbase, graphics/openexr: PORTREVISION bump for users
ilmbase and openexr were updated to v2.5.3 and their shlibs changed
from *.25.0.1 to *.25.0.2.
This is a PORTREVISION bump to ports using ilmbase or openexr
to chase that change and trigger rebuild.
openexr/ilmbase update w/ shlib rename => PORTREVISION bumps of dependent ports
OpenEXR and ILMBASE updates to 2.5.2 rename the full shlib version
names from .0.0 to .0.1 => to be on the safe side, bump PORTREVISIONs.
Approved by: portmgr (blanket)
MFH: 2020Q3 (PORTREVISION bump after OpenEXR/ilmbase update)
Security: 714e6c35-c75b-11ea-aa29-d74973d1f9f3
graphics/ilmbase: graphics/openexr: update to upstream release 2.5.1
Upstream release notes:
* A patch release that corrects the SO version for the v2.5 release,
which missed getting bumped in v2.5.0.
* This release also fixes an improper failure in IlmImfTest
when running on ARMv7 and AAarch64.
Bump PORTREVISION of all port directly requiring ilmbase or openexr
that are not marked BROKEN (shlib/.so file version bump).
Test build of all port directly depending on ilmbase or openexr
succeeded in poudriere in a 12.1-RELEASE amd64 jail.
graphics/ilmbase: graphics/openexr: update to v2.5.0
ChangeLog:
- https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.0
* Bump PORTREVISION of all consumers except py-openimageio (BROKEN).
* cad/PrusaSlicer:
LIB_DEPENDS: remove version from libHalf.so
BUILD_DEPENDS+=qt5-buildtools as package (needed on bare metal builds)
USE_GL+=gl
USES+=pkgconfig (needed to find libHalf)
Unbreak the build when previous version of the port is installed by
preventing system-wide include directories being injected into the
global CMake state and thus taking precedence over target's include
directories. Hook provided test suite to our framework while here.
PR: 245298
graphics/ilmbase, graphics/openexr: upgrade to upstream v2.4.0
graphics/gstreamer1-plugins-openexr: switch from C++98 to C++11 to
match new OpenEXR headers and unbreak compilation.
Bump PORTREVISION of all ports depending directly on either, based
on assessing INDEX-12 (bump_portrevision.pl -l (shallow) used).
Release Notes:
https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.4.0
The update was deliberately deferred until after 2020Q1, and should
not be MFH'd back to it.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.
Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>
Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.
Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.
Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)
Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions. Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
- Update `graphics/alembic' to version 1.7.4 [*]
- Utilize PLIST_FILES instead of pkg-plist to avoid passing ${PORTVERSION}
and ${PORTVERSION:R} via PLIST_SUB (not very elegant, but quite clear)
Found out via: repology.org [*]
Because GitHub releases (tarballs) are not fetched with correct modification
time, set TIMESTAMP to 1507854327 which corresponds to commit aefa609 tagged
as this release.
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
- Update `graphics/alembic' to version 1.7.1 [*]
- Make HDF5 support (and thus the dependency) optional
- USE_GL and Boost dependencies are no longer needed, remove them and
their associated patch files
- Remove CMAKE_ARGS: it was setting values which are the defaults now
- Add missing USE_LDCONFIG and move USE_GITHUB together with other USE_*
knobs: while it makes sense to have a dedicated GitHub-related block
of knobs, single USE_GITHUB does not really warrant it
- Remove HDF5_ROOT gimmick for Alembic < 1.6.0's AlembicHDF5.cmake as it
is no longer required (ditto for the patch)
Reported by: portscout [*]
Because GitHub releases (tarballs) are not fetched with correct modification
time, set TIMESTAMP to 1490314701 which corresponds to commit 895a7c6 tagged
as this release.
Allow HDF5 to be found with CMake >= 3.6.0.
CMake's FindHDF5.cmake underwent some refactoring upstream and it now respects
the HDF5_ROOT variable in more places and separates HDF5_LIBRARIES from
HDF5_HL_LIBRARIES.
Do some slight adjustments to the Alembic port for it to continue working with
the upcoming CMake 3.6.1 (they are no-ops with CMake 3.5.2 which is currently
in the ports tree):
- Set HDF5_ROOT via CMAKE_ARGS so that Alembic does not set it to a nonsensical
value.
- Add HDF5_HL_LIBRARIES to ALEMBIC_HDF5_LIBS so that libhdf5_hl.so continues to
be passed to the linker.
PR: 210988
Unbreak the build on PowerPC, in a simple way: replace deprecated __sync_*
function with corresponding __atomic_* counterpart and link with libatomic
against GCC. This should be no-op on Tier-1 architectures (against Clang),
since that code branch is guarded by __GNUC__ >= 4 && __GNUC_MINOR__ >= 4.
