Geomview and OOGL are part of an ongoing effort at the Geometry Center
to provide interactive 3D graphics software which is particularly
appropriate for displaying the kinds of objects and doing the kinds of
operations of interest in mathematics research and education. You can
compute an OOGL data file of a mathematical object that would be
difficult or impossible to build a model of in the real world. In
geomview, besides examining an object in ordinary Euclidean 3-space,
you can look at objects in hyperbolic 3-space and Euclidean 4-space.
The hyperbolic model is the projective one, where geodesics are
straight lines and isometries are represented as 4x4 projective
matrices. While geomview is tailored for mathematical visualization,
it is written to be extensible and can serve as a general-purpose
tool. Its functionality can be extended in an almost unlimited fashion
by external modules.
===> The following configuration options are available for geomview-1.9.5_5:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
INFO=on: Build and/or install GNU info pages
MOTION_AVG=off: Experimental motion averaging code
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
Add USES=xorg USES=gl, ports categories g
Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Remove two libtool fixes from Mk/Uses/libtool.mk. They don't always work
when an older version of a package is installed. This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries. For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries. Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.
With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.
This partially reverts r358784.
PR: 191611
Approved by: portmgr (bapt)
Add 4 new sed commands to USES=libtool. The first two apply some of the
changes that Debian made to their libtool. The first command applies to
libtool versions 1.4 and up. The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down. It applies to 2.x. Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).
The third and fourth command fix relinking. During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory. This allows running an
executable that links to libA from within the work directory. The relink
removes this extra runpath.
(Only the first 15 lines of the commit message are shown above )
- Add staging support
- Remove leading article from COMMENT
- Convert to USES=tar:bzip2
- Use option helper
- Move things to proper places and simplify where needed
- Install striped binaries
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
- Fix a typo on this port that enables it to build again.
- Label NOT_FOR AMD64 since it coredumps.
- Sync the patches with those on CVS.
- No functional change.
PR: 126037
Submitted by: "Pedro F. Giffuni" <pfgshield-freebsd at yahoo dot com>
- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.
While I'm here:
- Remove USE_MESA knob where it was (35 ports).
It marked as depricated for 2 years.
PR: ports/90247
Submitted by: Ermal Lu?i <eri--@albabsd.org>
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Maintenance update. Fix installation process. If someone would care to test
this and give it the love it badly needs, please step up to the microphone.
Looked at by: fenner
Sponsored by: Weyland-Yutani Corporation
Change motif to a normal dependency. REQUIRES_MOTIF is now called USE_MOTIF
and generates a LIB_DEPENDS to x11-toolkits/open-motif. As before, it implies
USE_XPM (and therefore USE_XLIB). Motif-dummy is removed from
PKG_IGNORE_DEPENDS, whose sole resident is now XFree86-3.
(1) Add new variable, XFREE86_VERSION, to specify which version of XFree86
(3 or 4) to depend to when USE_XLIB is set. XFREE86_VERSION defaults to 3
for now, but adventurous users can override it in /etc/make.conf. When
XFREE86_VERSION=3, USE_XLIB will add a dependency to x11/XFree86; when it
is set to 4, the dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS hacks
to avoid messing with XFree86 are turned off.
