all: drop support for expired FreeBSD 14.0

Simplify expressions for FreeBSD 13.X

Reviewed by:	many

Differential Revision:	https://reviews.freebsd.org/D46601

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart

graphics/kludge3d: Fix build with llvm16

- Utilize USES=localbase
- Pet portclippy

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Add compiler:c++11-lang to USES to fix build on GCC-based systens:

  configure: error: Cannot find acceptable GtkGlExt version.

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

graphics category: Remove $PTHREAD_LIBS

graphics/zbar didn't pass check-plist (pre-existing), fixed.

approved by:	PTHREAD blanket

Fix LIB_DEPENDS

- Convert ports of graphics/ to new USES=python

Approved by:	portmgr (implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Support staging
- Use new LIB_DEPENDS syntax

Explicitly link libraries on 10 unmaintained ports

The following ports will not build with a binutils 2.22+ linker built
with standard options.  This has been obvious with DPorts, but difficult
to see on FreeBSD.  However, setting the ports compiler as a recent gcc
(e.g lang/gcc48) is an excellent way to detect the unspecified but needed
libraries as these recent GCC compilers use the latest binutils linkers.
These patches were tested on FreeBSD 8.4 and DragonFly 3.5

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add an explicit dependency on pkgconf

Fix typos in COMMENT

Approved by:	portmgr@ (implicit)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with G

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Chase graphics/lib3ds 1.3.0 update

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Fix x11-toolkits/gtkglext dependency in LIB_DEPENDS (1.0.2 -> 1.0.0), which
  has changed since the last update.

Reported by:    linimon

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Bump PORTREVISION to chase the glib20 shared lib version change.

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Update to version 0040822

PR:             ports/71059
Submitted by:   Ports Fury

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Use PLIST_FILES.

Reviewed by:    marcus

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

SIZEify.

- Update to version 20031224

- Update to version 20031119

PR:             59518
Submitted by:   Ports Fury

- Update to version 20031028

PR:             58965
Submitted by:   Ports Fury

- Update to version 20030926

PR:             57804
Submitted by:   Ports Fury

Chase the GtkGLExt shared lib version.

- Update to version 20030726

PR:             54901
Submitted by:   KATO Tsuguru <tkato@prontomail.com>
Approved by:    fjoe (mentor) (implicit)

Update to version 20030718

PR:             54662
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to version 20030709.

PR:             ports/54324
Submitted by:   Ports Fury

Remove USE_GNOMENG.

de-pkg-comment

upgrade to 20021103

PR:             45432
Submitted by:   Ports Fury

Deploy USE_GNOMENG infrastructure

PR:             42349
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

Update to 20020702

PR:             ports/40499
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

add kludge3d 20020301
A simple 3d editor