16:57 rezny 

Update to 13.0.6

- Allow use of newer LLVM, i.e. llvm40, via MESA_LLVM_VER in make.conf [1]
- Disable use of LLVM on platforms where it's known not to be available [2]

PR:		[1] 217016, [2] 216944
Reported by:	[1] greenreaper@hotmail.com, [2] linimon
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10183

 

13:11 jrm 

graphics/gbm graphics/libEGL graphics/libdrm graphics/libglapi:
Bump PORTREVISION on ports that had dependency changes after r437182

Approved by:	mat, swills (mentor, implicit)
Differential Revision:	https://reviews.freebsd.org/D10179

 

06:50 ashish 

- Update devel/libpthread-stubs to 0.4
- Chase libpthread-stubs update, and also switch to BUILD_DEPENDS
  from LIB_DEPENDS, as port is now only .pc file

PR:		218015
Submitted by:	rezny

 

14:55 rezny 

Update to 13.0.5

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9781

 

16:43 kwm 

Now that all supported FreeBSD versions support libmap.conf files installed
from ports, remove the symlink dance with libGL/libEGL/libgles and the
nvidia-driver ports.

* Revert libGL/libEGL/libglesv2 ports to normal.
* Rename the conflicting libraries from the nvidia-driver ports with a
  -NVIDIA prefix and install a libmap.conf file to map to these versions.
* Remove the special case from Mk/Scripts/qa.sh for libGL and libEGL.
* Sadly the symlink dance between nvidia-driver and xorg-server for glx.so
  need to stay, due to xorg-server opening that file with dlopen(3).

Approved by:	portmgr@ (mat@ (prio version))
Differential Revision:	https://reviews.freebsd.org/D7848

 

13:31 rezny 

Update Mesa to 13.0.4

* Use LLVM 3.9
* OpenGL 4.4 support for recent Intel and ReadeonSI

PR:	214581
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9438

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

08:25 kwm 

Update Mesa ports to 11.0.6.

Obtained from:	x11 team development repo.

 

01:13 jbeich 

Convert the rest to USE_GL

Tested by:	make describe (only touched ports)
Approved by:	portmgr blanket

 

18:07 kwm 

Update Mesa port to 10.6.6 and add Clover.
Add beignet 1.1.0.
Add clinfo, clblas, clfft and clrng.

The major change is that all Mesa ports are now configured the same way.
This fixes several problems and enables new features.  The details
are described in this blog post:
http://blogs.freebsdish.org/graphics/2015/03/18/unifying-mesa-ports-configure/

The second important change is the OpenCL support.  Mesa's
implementation, Clover, is enabled as well as Beignet.  Clover
targets all Gallium drivers, only Radeon GPUs in our case.  Beignet
is for Intel GPUs starting with Ivy Bridge.  Thanks to Johannes
Dieterich, O. Hartman, and Koop Mast for their work on OpenCL!  As a
bonus, there are several OpenCL-based math ports added (clblas,
clfft and clrng). For more information and known issues, please see
https://wiki.freebsd.org/Graphics/OpenCL

The third change is the removal of Mesa 9.1.7 which was installed on
FreeBSD 9.3-RELEASE.  There is now only one version of Mesa in the Ports
tree (10.6.6) for all supported versions of FreeBSD.

Other, smaller changes:

* Include libosmesa into the Mesa framework; this changes libOSMesa
  shlib version.

* bsd.mesalib.mk was renamed and split up in two files namely
  Makefile.common and Makefile.targets.  So ports can overwrite variables
  set by Makefile.common and are used by Makefile.targets.

* Some text in the pkg-descr files was wrong, clean it up.  While here,
  update the WWW to the main mesa3d.org upstream page.

* devel/clinfo was added, a glxinfo like program but for OpenCL.

Non-x86 hardware reports are very welcome since we changed the framework
quite a bit.

Obtained from:	Graphics team development repo.

 

14:48 kwm 

Update to 10.3.4.

Enable TEXTURE option in dri by default [1]. This allows for OpenGL higher
  then 2.1 to be supported.
Make sure we depend on llvm at run time when gallium is enabled.
  The gallium based modules link to the llvm shared libraries. [2]

PR:		followup on 194655 [2]
Approved by:	core@ [1]
Obtained from:	xorg-dev repo

 

13:14 kwm 

Fix libEGL and libGLESv2 conflict between libEGL/libglesv2 and the
nvidia-driver port in the same fashion it was done as the conflict
with the libGL port.

Mesa ports:
Add pkg-[de]install scripts to handle the symlinks in the libEGL
  and libglesv2 port.
Move pkg-[de]install scripts of libGL out of files/
Put the real mesa libraries into lib/.mesa so we don't have each
  port create a directory for it own use.

Nvidia-driver:
Only apply the libEGL.so and libGLESv2.so alternative install
  directory if nvidia-driver actually ships them. Copied from
  PR submitter, since it was much cleaner then my initial attempt.
Make pkg-install script check if the nvidia-driver port installed
  the libEGL/libglesv2 libraries and only then make the symlinks.
  This should allow the script to work with the slave ports which
  don't install these libraries.
Make the pkg-deinstall script check if the mesa version of
 the libEGL/libGLESv2 libraries are installed before trying to
 recreate the symlinks of those ports.

PR:		194924
Submitted by:	Gerard Seibert <gerard_seibert@outlook.com>
Approved by:	portmgr (angrybapt)

 

09:53 kwm 

Update Mesa ports to new default of 9.1.7 and more recent version to 10.3.0.

The port will switch to the newer version if hw context is available in the
i915kms driver.

- Get ride of WITH_NEW_XORG.
- Use @comment in plist to ignore unwanted files in the stagedir, instead of
  trying to remove them in post-install.
- Bump portrevision of 9.1.7 due to dependency changes.
- Drop :keepla from USES=libtool.
- Drop @dirrm[try] from plists
- Give dri propper options, with pkg-help for additional information.
- Make separate plist for dri for the different versions, the combined plist
  was headache inducing.
- Add "workaround" patches to allow clang to build the dri port on i386 [1].
  USE_GCC is now only needed for 8.x.
- Add gbm port and USE_GL switch for it.

PR:		192286 [1]
Submitted by:	Carlos Jacobo Puga Medina [1]
Approved by:	portmgr (bapt@)
In collaberation with:	dumbbell@
Obtained from:	xorg-dev

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

09:56 kwm 

Enable shared libglapi library and make a port for it. It is used by libGL
 and libglesv2. This fixes undefined symbol issues in libglesv2.
Clean up stagedir of unwanted files/directories, so check-plist passes.
Switch logic and always build gallium support in graphics/dri on i386 and
 amd64. Gallium is used for Radeon HD 5000+ support.

Use USES=tar:bzip2
Under WITH_NEW_XORG:
Add patch to remove some dependencies for aclocal.m4 which are absent.
 This allows the removal of USE_AUTOTOOLS, REAPPLY_PATCHES and pre-configure
 target.
Add INSTALL_TARGET=install-strip to strip libraries.
USES=libtool:keepla
Fix a /use typo with /usr in post-patch.

Bump PORTREVISION for the libtool and libglapi changes.

Submitted by:	tijl@ (libtool and autotools changes)
Obtained from:	xorg-dev repo (libglapi and gallium changes)

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

18:35 antoine 

Fix WITH_NEW_XORG check, it has to be done after bsd.port.options.mk or
bsd.port.pre.mk is included for it to be default for 11 users

Silence from:	x11@

 

20:58 kwm 

Update to 9.1.7.

Stagify, abuse stage dir and plist to only install files we want to install.
So we don't have to do complex do-install anymore, yay.

For the WITH_GALLIUM option we don't need llvm at run-time.

Obtained from:	xorg-dev repo

 

00:29 zeising 

Add NO_STAGE=yes

 

17:01 zeising 

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

(Only the first 15 lines of the commit message are shown above )