| non port: graphics/libpano13/Makefile |
|
SVNWeb
|
Number of commits found: 50 |
|
Thu, 19 Jan 2023
|
[ 16:45 Thierry Thomas (thierry)  ]    112013a (Only the first 10 of 25 ports in this commit are shown above.  )
math/suitesparse*: bump PORTREVISION of dependant ports
|
|
Sun, 27 Nov 2022
|
[ 11:09 Thierry Thomas (thierry) ] 6f9769f (Only the first 10 of 24 ports in this commit are shown above. )
*/*: bump PORTREVISION after the upgrade of math/suitesparse*
PR: 267742
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 4 Jan 2022
|
[ 18:11 Piotr Kubaj (pkubaj) ] 2c49566
graphics/libpano13: update to 2.9.21
- revert unapproved changes from the 2.9.20 update
- add new SUITESPARSE option
- remove superseeded patches
Relevant upstream changes:
- new optional suitesparse dependency for improved geometric
optimisation speed
- the test suite is now functional again
- a lot of fixes for potential crashes and safer handling of data
- fix for bigendian architectures
- link with libm if necessary
- various installation location and content fixes
Changelog: https://sourceforge.net/projects/panotools/files/libpano13/libpano13-2.9.21/README.txt
PR: 260819
Submitted by: fuz@fuz.su (maintainer)
|
|
Wed, 20 Oct 2021
|
[ 16:13 Stefan Eßer (se) ] 7c7ef053
graphics/libpano13: Add CPE information
Approved by: portmgr (blanket)
|
|
Mon, 20 Sep 2021
|
[ 06:09 Daniel Engberg (diizzy) Author: Robert Clausecker ] b81f505
graphics/libpano13: Update to 2.9.20
Submitter becomes maintainer
Upstream have confirmed unit tests to be broken so they're disabled
for now.
Changelog:
https://sourceforge.net/projects/panotools/files/libpano13/libpano13-2.9.20/
PR: 258354
Approved by: tcberner
Differential Revision: https://reviews.freebsd.org/D31925
|
|
Mon, 6 Sep 2021
|
[ 21:00 Rene Ladan (rene) ] ef75df1
*: return grog@'s ports to the pool after safekeeping his commit bit.
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 26 Nov 2019
|
[ 21:46 jkim ]   (Only the first 10 of 443 ports in this commit are shown above. )
Clean up after java/openjdk6 and java/openjdk6-jre removal
java/openjdk6 support was removed from Mk/bsd.java.mk (r512662) and
java/openjdk6 and java/openjdk6-jre were removed from the ports tree
(r512663). Now this patch completely removes remaining stuff from the
ports tree.
PR: 241953 (exp-run)
Reviewed by: glewis
Approved by: portmgr (antoine)
Differential Revision: https://reviews.freebsd.org/D22342
|
|
Fri, 8 Nov 2019
|
[ 14:36 tobik ] (Only the first 10 of 74 ports in this commit are shown above. )
graphics: Add missing USES={gl,gnome,sdl}
|
|
Fri, 1 Dec 2017
|
[ 07:19 antoine ] (Only the first 10 of 41 ports in this commit are shown above. )
Cleanup LIB_DEPENDS on libpng
|
|
Fri, 21 Oct 2016
|
[ 15:21 mat ] (Only the first 10 of 354 ports in this commit are shown above. )
Use USES=pathfix where applicable.
PR: 213195
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D8093
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 12 Jan 2016
|
[ 16:20 amdmi3 ] (Only the first 10 of 791 ports in this commit are shown above. )
Convert LICENSE= "GPLxx # or later" to "GPLxx+"
Approved by: portmgr blanket
|
|
Fri, 20 Nov 2015
|
[ 11:17 antoine ]
Convert to USES=jpeg
|
|
Thu, 19 Nov 2015
|
[ 04:43 grog ]
Reset PORTREVISION.
Approved by: edwin@ (mentor)
MFC after: 2 weeks
|
[ 01:50 grog ]
Take MAINTAINER
Approved by: vd@
Update to 2.19.9
Approved by: edwin@ (mentor)
MFC after: 2 weeks
|
|
Mon, 22 Jun 2015
|
[ 18:33 antoine ] (Only the first 10 of 374 ports in this commit are shown above. )
Convert to USES=jpeg
|
|
Thu, 25 Dec 2014
|
[ 20:54 bapt ] (Only the first 10 of 446 ports in this commit are shown above. )
Bump portrevision after png update
|
[ 19:04 antoine ] (Only the first 10 of 332 ports in this commit are shown above. )
Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade
|
|
Thu, 11 Dec 2014
|
[ 10:50 amdmi3 ]
- Add LICENSE
- Properly OPTIONize java support
PR: 191787
Submitted by: mazhe@alkumuna.eu
Approved by: maintainer timeout (vd, 5 months)
|
|
Thu, 18 Sep 2014
|
[ 20:32 tijl ]
Convert to USES=autoreconf and add INSTALL_TARGET=install-strip
|
|
Thu, 24 Jul 2014
|
[ 00:29 amdmi3 ]
- Switch to USES=libtool, drop .la files
Approved by: portmgr blanket
|
|
Thu, 13 Mar 2014
|
[ 08:37 mandree ]
Modernize LIB_DEPENDS, strip .so file after install in default build, support
staging.
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Mon, 10 Dec 2012
|
[ 13:18 bapt ] (Only the first 10 of 172 ports in this commit are shown above. )
Decommissioning java 1.5 (EOLed since October 2009):
suppress any reference to JAVA_VERSION= 1.5+ (part2)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Tue, 18 Oct 2011
|
[ 07:54 vd ]
Upgrade graphics/libpano13 from 2.9.17 to 2.9.18.
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Thu, 21 Jul 2011
|
[ 05:03 linimon ] (Only the first 10 of 269 ports in this commit are shown above. )
Now that the Java 1.3 and Java 1.4 ports are deprecated and will expire soon,
remove support for them from bsd.java.mk. As Jikes is not available in Java 1.5
or higher, remove it from bsd.java.mk too (suggested by hq@) and from the ports
which used it (only occurences were USE_JIKES=no). Support for the Blackdown VM
is also removed, as it is not available in Java 1.5 and higher.
Also remove the mapping from Java 1.1-1.4 to Java 1.5+ in bsd.java.mk to detect
old, broken ports; therefore bump the minimal value of JAVA_VERSION to 1.5.
While here, replace static values of JAVA_VERSION in files/*.in by
%%JAVA_VERSION%% .
PR: ports/158969
Submitted by: rene
Tested on: pointyhat-west -exp
|
|
Fri, 21 Jan 2011
|
[ 09:36 vd ]
Fix graphics/libpano13 pkg-plist
Install libpano13.pc in libdata/pkgconfig instead of lib/pkgconfig
pkg-config finds the .pc file in either location but I change it to be
consistent with the majority of FreeBSD ports. Also libdata/pkgconfig
does not need to be removed by the port itself upon deinstallation.
Feature safe: yes
|
|
Wed, 19 Jan 2011
|
[ 19:03 pav ]
- Mark BROKEN: incomplete plist and installs .pc file to lib/ instead of
libdata/
Reported by: pointyhat
Feature safe: yes
|
|
Mon, 10 Jan 2011
|
[ 09:34 vd ]
Upgrade graphics/libpano13 from 2.9.14 to 2.9.17.
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 16 Oct 2010
|
[ 11:52 ade ] (Only the first 10 of 445 ports in this commit are shown above. )
Punt autoconf267->autoconf268
|
|
Tue, 5 Oct 2010
|
[ 19:57 ade ] (Only the first 10 of 235 ports in this commit are shown above. )
Round one migration of ports from automake{19,110} to automake111
|
|
Wed, 15 Sep 2010
|
[ 18:35 ade ] (Only the first 10 of 652 ports in this commit are shown above. )
Autotools update. Read ports/UPDATING 20100915 for details.
Approved by: portmgr (for Mk/bsd.port.mk part)
Tested by: Multiple -exp runs
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 22 Aug 2009
|
[ 00:23 amdmi3 ] (Only the first 10 of 415 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with G
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Wed, 29 Jul 2009
|
[ 07:26 vd ]
graphics/libpano13:
Fix plist for WITHOUT_JAVA case.
PR: ports/136823
Submitted by: Dmitry Marakasov <amdmi3@amdmi3.ru>
|
|
Sat, 18 Jul 2009
|
[ 11:11 dinoex ] (Only the first 10 of 337 ports in this commit are shown above. )
- update to jpeg7
Tested by: pav on pointyhat
|
|
Mon, 15 Jun 2009
|
[ 07:49 vd ]
graphics/libpano13:
Fix build with custom LOCALBASE.
Reported by: qat@
|
|
Tue, 9 Jun 2009
|
[ 19:56 vd ]
Upgrade graphics/libpano13 from 2.9.12 to 2.9.14.
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Aug 2008
|
[ 00:57 ade ] (Only the first 10 of 398 ports in this commit are shown above. )
Conversion from (now defunct) autoconf-2.61 to autoconf-2.62
Tested by: exp build run (erwin)
|
|
Fri, 6 Jun 2008
|
[ 13:35 edwin ] (Only the first 10 of 304 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Tue, 9 Oct 2007
|
[ 16:43 vd ] (Only the first 10 of 11 ports in this commit are shown above. )
Add new port graphics/libpano13 - the successor of graphics/libpano12
This is the pano13 library, part of the Panorama Tools by Helmut
Dersch of the University of Applied Sciences Furtwangen.
The panorama tools are mainly used to build panoramic images from a set of
overlapping images. The usability extends beyond "just" building panoramas by
far though. You can, for instance, use them to render an average of multiple
images to broaden the dynamic range of the images or average out noise. You
can also build object movies with them, morph between images and much more.
WWW: http://panotools.sourceforge.net/
|
Number of commits found: 50 |
As an Amazon Associate I earn from qualifying purchases.