*: Switch consumers over to Django 4.2

Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.

* Switch most ports that use www/py-django32 to www/py-django42.

* Ports that are not compatible with Django 3.2 have already been set
  with an expiration date were not taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		276319
Reviewed by:	dvl, grembo, ultima
Approved by:	bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
		ultima, maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D44637

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

graphics/py-sorl-thumbnail: Update to 12.10.0

Changelog since 12.8.0:

https://github.com/jazzband/sorl-thumbnail/blob/12.10.0/CHANGES.rst

PR:		276320
Approved by:	Kevin Golding (maintainer)

Mk/Uses/magick.mk: Bump all consumers

Bump all consumers of ImageMagick ports after flavorizing them.

Approved by:	tcberner (mentor, implicit)

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

www/py-django32: Switch consumers over to Django 3.2

Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.

* Switch the most ports that use www/py-django22 to www/py-django32

* Switch www/seahub over to www/py-djangorestframework

* Ports that are not yet ready for Django 3.2 (only three so far) or
  those that have already been set with an expiration date were not
  taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		261313
Reviewed by:	bofh, dvl, koobs, ultima
Approved by:	bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
		Alexander Sieg (maintainers)
		maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D34859

graphics/py-sorl-thumbnail: Update to 12.8.0

Changes:
https://github.com/jazzband/sorl-thumbnail/blob/de96f2b6c67748e6ec6aed50fb5f6cd75b7d3414/CHANGES.rst

PR:		261994

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

Remove # $FreeBSD$ from Makefiles.

Remove PY_SPHINX from ports using Python 3

Approved by:	 portmgr blanket
Differential Revision:	https://reviews.freebsd.org/D28093

Update Sphinx

- Repocopy textproc/py-sphinx to textproc/py-sphinx18

  Update it to 1.8.5 (latest version from 1.8.X).
  This version supports Python 2 and 3.
  Add test target.

- textproc/py-sphinx: Update to 3.0.2

  Python 3 only (3.5+).
  Add test target.

- Mk/Uses/python.mk: Add PY_SPHINX

graphics/py-sorl-thumbnail: Update to 12.6.3

* Assign to Django 2.2 (current LTS release) as Django 1.11 is End-of-Life.

* Make port concurrent safe as it installs files outside Python's site-lib
  directory.

* Separate USES block from non-relevant variables and pet portlint
  (whitespace issues in pkg-plist)

* Also remove an obsolete patch that was required to fix build issues with
  the documentation files.

Changelog:

https://github.com/jazzband/sorl-thumbnail/blob/12.6.3/CHANGES.rst

PR:		245358
Approved by:	Kevin Golding <ports@caomhin.org> (maintainer)

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

graphics/py-sorl-thumbnail: Update default option

PR:		228561
Submitted by:	Kevin Golding <ports@caomhin.org> (maintainer)

- Update to 12.4.1
- Changed RUN_DEPENDS (assign to Django 1.11)
- Added LICENSE_FILE
- Added NO_ARCH
- Added DOCS option with the appropriate dependencies
- Changed options to reflect the new possibilities with the pluggable engines
and key value stores
- Updated pkg-descr

PR:	228309
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer
Sponsored by:	iXsystems Inc.

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

In several dozen ports, use single space for WWW: line in pkg-descr, and
reformat port description text in cases when it was notoriously broken.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Switch forgotten ports over to py-django18
- Fix PYTHON_PKGNAMEPREFIX

Reported by:    antoinebot

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

Update "BSD" license in graphics category

graphics/py-sorl-thumbnail: switch from py-imaging to py-pillow

- USES python

With hat:	python
Approved by:	portmgr (bdrewery, implicit)

- Stage support
- Convert to PYDISTUTILS_AUTOPLIST
- Bump PORTREVISION

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- adoption of optionsNG
- convert to USES in some cases (pkgconfig,pathfix)
- trim COMMENT/historical headers in some cases

Approved by:	portmgr (miwi)

- Fix checksum mismatch [1]
- Alternate patch submitted by maintainer

PR:             163024 [1]
Submitted by:   Dulmandakh Sukhbaatar <dulmandakh@gmail.com> [1]
Approved by:    ports@caomhin.org (maintainer), gabor (mentor)
Feature safe:   yes

- Move over to py25 or above
- While here get rid FreeBSD 6.X and md5 support

- update to jpeg-8

The sorl-thumbnail package provides an easy way to generate image
thumbnails.
Although not required to use, sorl-thumbnail is heavily integrated with
the Django framework.

WWW:    http://code.google.com/p/sorl-thumbnail/

PR:             ports/140824
Submitted by:   Kevin Golding <ports at caomhin.org>