notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
non port: graphics/qgis/Makefile
SVNWeb

Number of commits found: 241 (showing only 100 on this page)

1 | 2 | 3  »  

Sun, 19 Jun 2022
[ 19:51 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:e87b8d7a94cefda74d169cd441a684d25816e553  e87b8d7 
graphics/qgis: Update to 3.26.0

- Use LAZperf internal version, since it is recommended

Changelog: https://changelog.qgis.org/en/qgis/version/3.26/

Reported by:	portscout, Repology
Thu, 16 Jun 2022
[ 15:13 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:328ae4074233a5b85e0e38efece1af5dcc218160  328ae40  (Only the first 10 of 52 ports in this commit are shown above. View all ports for this commit)
*/*: Replace science/szip with science/libaec

- Bump PORTREVISION of dependent ports for dependency change

szip does not allow redistribution in binary form without proper commercial
license. Its LICENSE_PERMS should be set to no-auto-accept which blocks building
this port, therefore building dependent ports are also blocked. Switch all
dependent ports to science/libaec to avoid conflicts and license issue.

PR:		228743, 246097, 250165
Sat, 21 May 2022
[ 07:51 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:e0ea3e9b9ecd4043ff564b75471ca7e1a72d908c  e0ea3e9 
graphics/qgis: Update to 3.24.3

- Remove testbuild
- Sort pkg-plist

Changelog: https://github.com/qgis/QGIS/compare/final-3_24_2%5E...final-3_24_3

Reported by:	portscout, Repology
Mon, 16 May 2022
[ 06:49 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:17e453ccb903ec8adb8dfb258c27c5ed0c6883b2  17e453c 
graphics/qgis*: fix pkg-plist use share/man

Approved by:	portmgr (blanket)
Sun, 17 Apr 2022
[ 06:40 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:2268ec40fbced059d68fb31e593865b518867950  2268ec4 
graphics/qgis: Update to 3.24.2

Changelog: https://github.com/qgis/QGIS/compare/final-3_24_1%5E...final-3_24_2

Reported by:	portscout, Repology
MFH:		2022Q2
Sat, 16 Apr 2022
[ 04:19 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:10d211b655d85e31bf9b8e27d234f526cfd1e49b  10d211b  (Only the first 10 of 60 ports in this commit are shown above. View all ports for this commit)
devel/protobuf: Update to 3.20.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/protocolbuffers/protobuf/releases
Sun, 10 Apr 2022
[ 19:11 Charlie Li (vishwin) search for other commits by this committer ]    commit hash:d63665f7cd9c99880704a3c5bc221829cb009744  d63665f  (Only the first 10 of 892 ports in this commit are shown above. View all ports for this commit)
textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
Mon, 28 Mar 2022
[ 05:22 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:8f819385009c867643f1e393b4c86fd6726856eb  8f81938  (Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
devel/qscintilla-qt5: Update to 2.13.2

Change:
  - https://riverbankcomputing.com/news/QScintilla_2.13.2_Released
Sat, 26 Mar 2022
[ 08:27 Matthias Fechner (mfechner) search for other commits by this committer ]    commit hash:247c7db7513f1264922428278678da641c5a3f52  247c7db  (Only the first 10 of 867 ports in this commit are shown above. View all ports for this commit)
textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
Sat, 19 Mar 2022
[ 17:10 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:6b7629f19a7b07059c903c4144bb39829882d6f6  6b7629f 
graphics/qgis: Update to 3.24.1

Changelog: https://github.com/qgis/QGIS/compare/final-3_24_0%5E...final-3_24_1

Reported by:	portscout, Repology
MFH:		No (2022Q1 is one major version back)
Mon, 7 Mar 2022
[ 17:39 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:2d8f8573167d49958b7fbf471f42a360a20227d8  2d8f8573  (Only the first 10 of 75 ports in this commit are shown above. View all ports for this commit)
devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine
Mon, 28 Feb 2022
[ 12:46 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:f7e42ce5d5a3f11265d1e253b04212001992eca2  f7e42ce  (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
devel/protobuf: Update to 3.19.4

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/protocolbuffers/protobuf/releases
Sun, 20 Feb 2022
[ 09:50 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:10120efedc79c6caf872a32f65e241631af3919e  10120ef 
graphics/qgis: Update to 3.24.0

Changelog: https://changelog.qgis.org/en/qgis/version/3.24/

This update takes into account suggestions by Martin Birgmeier and
adrig@ in PR 261333 to reduce the number of dependents, especially
for Qt5. Dependencies like webengine and webkit must remain,
otherwise functionalities for QGIS and for important extensions are
missing, see PR.

PR:		261333
Reported by:	portscout, Repology
Thu, 27 Jan 2022
[ 20:12 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:354d8cf1c3384eebbd1bb165f686f5ddd9c7c837  354d8cf  (Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
*/*: Update qscintilla2 to 2.13.1

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.1_Released
[ 06:12 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:4f0a5e1540c391610950d6ae9ce64ba0dd218d72  4f0a5e1  (Only the first 10 of 205 ports in this commit are shown above. View all ports for this commit)
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sun, 23 Jan 2022
[ 20:56 Rene Ladan (rene) search for other commits by this committer ]    commit hash:48d98ef9181e828b575f37e1841ad53e5def5987  48d98ef  (Only the first 10 of 87 ports in this commit are shown above. View all ports for this commit)
cleanup: remove transitive py27 deprecation (www/qt5-webengine)
Tue, 18 Jan 2022
[ 06:32 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:13df94555828f1d3646427f4128320b9bf875d4d  13df945 
graphics/qgis: Step down version for OWSLib dependency

Dependency graphics/py-OWSLib has lower version on quarterly, sorry.

Reported by:	pkg-fallout
MFH:		2022Q1
Mon, 17 Jan 2022
[ 16:17 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:3068373166f11345e86bde59bc3f59c19a71abd5  3068373 
graphics/qgis: Change back from PORTVERSION to DISTVERSION

Reported by:	diizzy@
[ 08:12 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:4565ee62071d27c0b579d94a5f403ab5ca01774a  4565ee6 
graphics/qgis: Change from Github to QGIS release archive

While here, remove unneeded PATCH_SITES.

Reported by:	Daniel Engberg <diizzy@FreeBSD.org>
MFH:		2022Q1
[ 06:14 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:ffab526e3cf40420663ec62457556521d41f4ed5  ffab526 
graphics/qgis: Update to 3.22.3

Changelog: https://github.com/qgis/QGIS/compare/final-3_22_2%5E...final-3_22_3

Reported by:	Repology
MFH:		2022Q1
Wed, 12 Jan 2022
[ 19:41 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:654acd81409d31495f8b1b11db61e1afbf640981  654acd8  (Only the first 10 of 66 ports in this commit are shown above. View all ports for this commit)
math/gsl: bump portrevision of consumers after update to 2.7.1

PR:		260201
Sun, 19 Dec 2021
[ 09:36 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:5936dd19952ed39374c46a8e8b3085af8004bdcb  5936dd1 
graphics/qgis: 3.22.2

Patches for qgsogrproviderutils not necessary any more, since committed
upstream.

Changelog: https://github.com/qgis/QGIS/compare/final-3_22_1%5E...final-3_22_2

Reported by:	Repology
Sat, 20 Nov 2021
[ 09:05 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:cbce6ea1d3268734912303f593a1fb0f43829821  cbce6ea 
graphics/qgis: Update to 3.22.1

Changelog: https://github.com/qgis/QGIS/compare/final-3_22_0%5E...final-3_22_1

Reported by:	Repology
Sun, 24 Oct 2021
[ 07:08 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:069de9cc7922058c9521a63f1414bacdc8249217  069de9c 
graphics/qgis: Switch to external MDAL

Now that math/mdal is updated to v0.9.0, using it again. Thanks to wen@
Sat, 23 Oct 2021
[ 08:57 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:0d4806296a55e1771f4009113579383eb0e71327  0d48062 
graphics/qgis: Update to 3.22.0

- Use internal MDAL, until v0.9.0 is in the ports
- Needs FLEX >= v2.5.6 (thanks to lbartoletti@ for the hint)

Changelog: https://changelog.qgis.org/en/qgis/version/3.22/
Sun, 10 Oct 2021
[ 19:44 Baptiste Daroussin (bapt) search for other commits by this committer ]    commit hash:2c672a4de941dc57142d867ba42396b1b64d2921  2c672a4  (Only the first 10 of 586 ports in this commit are shown above. View all ports for this commit)
INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
Sat, 11 Sep 2021
[ 12:20 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:024d2990b0ce83b963d796d06227a9ebcdca2f58  024d299 
graphics/qgis: Update to 3.20.3

Changelog: https://changelog.qgis.org/en/qgis/version/3.20/

Reported by:	Repology
Fri, 3 Sep 2021
[ 06:22 Bernhard Froehlich (decke) search for other commits by this committer ]    commit hash:e407b1743e9af3a673cc7cd6b1a9e9b16430164d  e407b17 
graphics/qgis: Remove invalid CPE information

Approved by:    portmgr (blanket)
Sat, 14 Aug 2021
[ 11:33 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:a34a4070fd78286d066b2d3525558e85c548920d  a34a407 
graphics/qgis: Update to 3.20.2

Changelog: https://github.com/qgis/QGIS/compare/final-3_20_1...final-3_20_2

Reported by:	portscout, Repology
Wed, 4 Aug 2021
[ 10:27 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:62329a89eaa534aa5bf12131f624be4edbd060a5  62329a8 
graphics/qgis: Update to 3.20.1

- Various bug fixes, among others for PostgreSQL and Python
- Use MDAL port instead of internal version

Changelog: https://changelog.qgis.org/en/qgis/version/3.20

Reported by:	Repology
Tue, 27 Jul 2021
[ 18:55 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:8b9c482b9026cdd2ba8d0afd28205a563289d88e  8b9c482  (Only the first 10 of 49 ports in this commit are shown above. View all ports for this commit)
*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
  - https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR:	257308
Exp-run by:	antoine
Wed, 21 Jul 2021
[ 18:11 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:f4acead6367a692af17431cc233565e8f1149366  f4acead  (Only the first 10 of 64 ports in this commit are shown above. View all ports for this commit)
devel/protobuf: Update to 3.17.3

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/protocolbuffers/protobuf/releases
PR:		257026
Exp-run by:	antoine
Mon, 12 Jul 2021
[ 12:36 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:9713ff93f26132468714bfba19c8d7f671b8e4cb  9713ff9  (Only the first 10 of 46 ports in this commit are shown above. View all ports for this commit)
devel/qscintilla2: Update to 2.12.1

Changelog:
	https://riverbankcomputing.com/news/QScintilla_2.12.1_Released

PR:		257002
Exp-run by:	antoine
Thu, 24 Jun 2021
[ 16:12 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:bac343da849ae1d5cd7724d2cf371574013d4404  bac343d 
graphics/qgis: Update to 3.20.0

- Numerous data management improvements, with advanced changes to the
  management and display of CRS systems and projection information
- Basic support for coordinate epoch of dynamic CRS systems and
  advanced accuracy integrity warnings
- Improved metadata management and handling for certain data and
  metadata types
- Native integration of the nominatim geocoding service

Changelog: https://changelog.qgis.org/en/qgis/version/3.20/

Reported by:	portscout, Repology
Tue, 22 Jun 2021
[ 18:53 Kevin Bowling (kbowling) search for other commits by this committer ]    commit hash:da3162c7c9f01912ba1940e188b253f2b5c7ba77  da3162c  (Only the first 10 of 914 ports in this commit are shown above. View all ports for this commit)
graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824
Wed, 16 Jun 2021
[ 19:31 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:63e653adaa7493aa98f17f9fbc834c0aed7e096e  63e653a  (Only the first 10 of 66 ports in this commit are shown above. View all ports for this commit)
math/gsl: update to 2.7

From [1]

* What is new in gsl-2.7:
	* fixed doc bug for gsl_histogram_min_bin (lhcsky at 163.com)
	* fixed bug #60335 (spmatrix test failure, J. Lamb)
	* fixed bug #36577
	* clarified documentation on interpolation accelerators (V. Krishnan)
	* fixed bug #45521 (erroneous GSL_ERROR_NULL in ode-initval2, thanks to M.
Sitte)
	* fixed doc bug #59758
	* fixed bug #58202 (rstat median for n=5)
	* added support for native C complex number types in gsl_complex
	   when using a C11 compiler
	* upgraded to autoconf 2.71, automake 1.16.3, libtool 2.4.6
(Only the first 15 lines of the commit message are shown above View all of this commit message)
[ 05:01 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:c485094ccc49a5f41e87198d7158ec6e6921152b  c485094 
archivers/lazperf: Uses liblazperf.so

Since lazperf is no longer header-only it is better to indicate the
dependency on the lib.

This commit unbreak databases/grass7 build.
Sun, 6 Jun 2021
[ 09:33 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:9cfecc023e09fdf091f0bfb199c27cb0cc08ad6d  9cfecc0 
archivers/lazperf: Bump PORTREVSION on all consumers

Lazperf has changed the name of the includes to :
${LOCALBASE}/include/lazperf/lazperf.hpp

Fixes ports that use lazperf.
Sat, 15 May 2021
[ 19:20 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:f9d4c8e38d5542e12f47aa8e8ec666b4dae7b097  f9d4c8e 
graphics/qgis: Update to 3.18.3

Changelog: https://changelog.qgis.org/en/qgis/version/3.18/

Reported by:	portscout
Mon, 19 Apr 2021
[ 16:54 Loïc Bartoletti (lbartoletti) search for other commits by this committer ]    commit hash:804841a56e74c490f164220aa351d7ea7a0d567d  804841a  (Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
databases/spatialite and databases/spatialite-tools: Update to 5.0.1
Sat, 17 Apr 2021
[ 16:18 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:6128cfb9c6398915e1fd487b3841bd0693b31eda  6128cfb 
graphics/qgis: Update to 3.18.2

Changelog: https://changelog.qgis.org/en/qgis/version/3.18/

Reported by:	portscout
Wed, 7 Apr 2021
[ 13:25 Rainer Hurling (rhurlin) search for other commits by this committer ]    commit hash:af88cc962e30cf8277d764aeb2f61cde76d3dc6a  af88cc96 
graphics/qgis: Add support for PointCloud

PR:		254716
Submitted by:	Loic Bartoletti <lbartoletti@FreeBSD.org>
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Wed, 24 Mar 2021
[ 13:34 rene search for other commits by this committer ] Original commit   Revision:569118 (Only the first 10 of 129 ports in this commit are shown above. View all ports for this commit)
Mark ports recursively depending on Python 2.7 for expiration on June 23.

For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.

Submitted by:	rene
Reviewed by:	portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D28665
Sun, 21 Mar 2021
[ 13:44 rhurlin search for other commits by this committer ] Original commit   Revision:568919
graphics/qgis: Update to 3.18.1

Mainly a bugfix release.

Changelog: https://github.com/qgis/QGIS/compare/final-3_18_0...final-3_18_1

Reported by:	Repology
Tue, 16 Mar 2021
[ 09:29 lbartoletti search for other commits by this committer ] Original commit   Revision:568547 (Only the first 10 of 57 ports in this commit are shown above. View all ports for this commit)
PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine
Mon, 8 Mar 2021
[ 06:49 lbartoletti search for other commits by this committer ] Original commit   Revision:567825 (Only the first 10 of 100 ports in this commit are shown above. View all ports for this commit)
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine
Tue, 23 Feb 2021
[ 05:58 lbartoletti search for other commits by this committer ] Original commit   Revision:566369 (Only the first 10 of 30 ports in this commit are shown above. View all ports for this commit)
graphics/gdal: Set the default options as a workable set

- reinstate r552962 (was reverted in r553000)
- remove pkg-message from qgis and qgis-ltr
- Bump PORTREVSION on all consumers

PR:		224004
Approved by:	portmgr
Sat, 20 Feb 2021
[ 17:48 rhurlin search for other commits by this committer ] Original commit   Revision:566175
graphics/qgis: Update to 3.18.0

Now with Native Point Cloud support

Changelog: https://changelog.qgis.org/en/qgis/version/3.18/

Reported by:	portscout
Sat, 30 Jan 2021
[ 13:29 sunpoet search for other commits by this committer ] Original commit   Revision:563407 (Only the first 10 of 62 ports in this commit are shown above. View all ports for this commit)
Update USES=python: math/py-pandas 1.2.0 requires Python 3.7+

PR:		250103
Tue, 26 Jan 2021
[ 14:01 sunpoet search for other commits by this committer ] Original commit   Revision:562671 (Only the first 10 of 58 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for devel/protobuf shlib change
Tue, 19 Jan 2021
[ 20:42 rhurlin search for other commits by this committer ] Original commit   Revision:562081
graphics/qgis: Update to 3.16.3

Changelog: https://github.com/qgis/QGIS/compare/final-3_16_2...final-3_16_3

Reported by:	Repology
Approved by:	arrowd, tcberner (mentors, implicit)
Mon, 18 Jan 2021
[ 19:03 lbartoletti search for other commits by this committer ] Original commit   Revision:561958 (Only the first 10 of 44 ports in this commit are shown above. View all ports for this commit)
Update qscintilla2 to 2.11.6
Tue, 22 Dec 2020
[ 17:51 rhurlin search for other commits by this committer ] Original commit   Revision:558931
graphics/qgis: Update to 3.16.2

Bugfix release with some improvements.

Changelog: https://github.com/qgis/QGIS/compare/final-3_16_1...final-3_16_2

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D27721
Tue, 15 Dec 2020
[ 17:56 lbartoletti search for other commits by this committer ] Original commit   Revision:558168 (Only the first 10 of 54 ports in this commit are shown above. View all ports for this commit)
Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1

PR:		251764
Exp-run by: antoine
Tue, 8 Dec 2020
[ 20:03 lbartoletti search for other commits by this committer ] Original commit   Revision:557300 (Only the first 10 of 136 ports in this commit are shown above. View all ports for this commit)
Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.

- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0

SIP is a collection of tools  to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 5 Dec 2020
[ 14:22 sunpoet search for other commits by this committer ] Original commit   Revision:557064 (Only the first 10 of 22 ports in this commit are shown above. View all ports for this commit)
Move textproc/py-MarkupSafe to textproc/py-markupsafe

- Bump PORTREVISION for dependency change
Sat, 28 Nov 2020
[ 15:06 rhurlin search for other commits by this committer ] Original commit   Revision:556508
graphics/qgis: Update to 3.16.1

Bugfix release [1][2].

[1] https://qgis.org/en/site/forusers/visualchangelog316/index.html
[2] https://github.com/qgis/QGIS/compare/final-3_16_0...final-3_16_1

If you miss features in QGIS that are actually built
into QGIS, you may need to enable additional options
in graphics/gdal, see pkg-message.

Approved by:	arrowd (mentor)
Differential Revision:	https://reviews.freebsd.org/D27374
Wed, 18 Nov 2020
[ 05:27 lbartoletti search for other commits by this committer ] Original commit   Revision:555622 (Only the first 10 of 34 ports in this commit are shown above. View all ports for this commit)
graphics/proj: Update to 7.2.0

Changelog:
  - https://proj.org/news.html#release-notes
Tue, 17 Nov 2020
[ 09:23 lbartoletti search for other commits by this committer ] Original commit   Revision:555543 (Only the first 10 of 36 ports in this commit are shown above. View all ports for this commit)
graphics/proj: Update to 7.1.1

- Add a pkg-message explaining how to access or sync datum grids from the CDN
  (disabled by default)
- Add curl and tiff dependencies since proj can read datum grids from remote
  COG (Cloud Optimized Geotiff)
- Take maintainer'ship (ok wen@)

PR:		245611
Submitted by:	wen (first version)
Reviewed by:	wen, rhurlin
Approved by:	wen
Exp-run by:	antoine
Fri, 30 Oct 2020
[ 16:38 rhurlin search for other commits by this committer ] Original commit   Revision:553701
graphics/qgis: Missing build dependency

By mistake the last commit contained a pre-version of Makefile, which missed
BUILD_DEPENDS=devel/opencl. Sorry for any inconvenience.

Reported by:	pkg-fallout
Approved by:	arrowd (mentor)
Differential Revision:	https://reviews.freebsd.org/D27021
Tue, 27 Oct 2020
[ 07:57 rhurlin search for other commits by this committer ] Original commit   Revision:553423
graphics/qgis: Update to 3.16.0

This update from 3.14.16 to 3.16.0 fixes many bugs and brings a lot of new
features[1].

- Ability to export temporal animation frames
- Added a new goto locator filter
- Add context menu to map canvas
- Many styling and labelling improvements
- Render axis for stacked bar diagram
- Many mesh datasets and layer improvements
- New features in rendering and 3D
- better print layout
- New features in expressions and digitizing
- ...

[1] https://qgis.org/en/site/forusers/visualchangelog316/index.html

The port now integrates OpenCL functionality.

Reviewed by:	arrowd (mentor)
Differential Revision:	https://reviews.freebsd.org/D26951
Tue, 6 Oct 2020
[ 13:04 lbartoletti search for other commits by this committer ] Original commit   Revision:551576
databases/grass7: Update to 7.8.4

  - update grass7 to 7.8.4
  - bump qgis and qgis-ltr portversion

Changelog:
  - https://trac.osgeo.org/grass/wiki/Release/7.8.4-News
Mon, 5 Oct 2020
[ 15:50 lbartoletti search for other commits by this committer ] Original commit   Revision:551499 (Only the first 10 of 122 ports in this commit are shown above. View all ports for this commit)
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine
Wed, 23 Sep 2020
[ 11:51 rhurlin search for other commits by this committer ] Original commit   Revision:549683
graphics/qgis: Update to 3.14.16

This is a minor update for QGIS from version 3.14.15. It fixes several problems
and brings some new features[1].

[1] https://github.com/qgis/QGIS/compare/final-3_14_15...final-3_14_16

Changes in the port:
- Update distversion number
- Remove portrevision
- Remove patch files needed for 3.14.15
- Move LIB_DEPENDS before RUN_DEPENDS
- Reorder entries in USES section
- Update distinfo

Approved by:	arrowd (mentor)
Relnotes:	https://qgis.org/en/site/forusers/visualchangelog314/index.html
Differential Revision:	https://reviews.freebsd.org/D26527
Thu, 10 Sep 2020
[ 19:17 rhurlin search for other commits by this committer ] Original commit   Revision:548221 (Only the first 10 of 19 ports in this commit are shown above. View all ports for this commit)
Change the maintainer entry in rhurlin's ports

After I got a commit bit for ports, it is time now to change the maintainers
entry in all 'owned' ports.

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D26398
Sun, 30 Aug 2020
[ 20:19 sunpoet search for other commits by this committer ] Original commit   Revision:547081 (Only the first 10 of 59 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for devel/protobuf shlib change
Mon, 24 Aug 2020
[ 06:43 lbartoletti search for other commits by this committer ] Original commit   Revision:546049
graphics/qgis: Update to 3.14.15

 * Update to 3.14.15
 * Remove files/patch-src_core_CMakeLists.txt (upstreamed) [1]
 * Prepare for PyQt5 and Sip5 [2]

[1] https://github.com/qgis/QGIS/pull/38103
[2] Upstream PR https://github.com/qgis/QGIS/pull/37901 (included in 3.14.15)
and https://github.com/qgis/QGIS/pull/37842 (patches taken from commits)

PR:		248783
Approved by:	Rainer Hurling (maintainer)
Wed, 1 Jul 2020
[ 07:01 lbartoletti search for other commits by this committer ] Original commit   Revision:540928
graphics/qgis: Update to 3.14.0

    - Update to 3.14.0
    - Update several Python dependencies
    - Remove txt2tags:textproc/txt2tags, not needed any more
    - Add devel/py-black, graphics/py-geopandas, devel/py-jedi, and
devel/protobuf dependencies
    - Change post-install ${FIND} parameter

Changelog:
    - https://changelog.qgis.org/en/qgis/version/3.14/

PR:		247622
Submitted by:	Rainer Hurling (maintainer)
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D25508
Wed, 3 Jun 2020
[ 18:44 lbartoletti search for other commits by this committer ] Original commit   Revision:537831
graphics/qgis: prepare for Qt5.15

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D25091
Sat, 11 Apr 2020
[ 05:04 lbartoletti search for other commits by this committer ] Original commit   Revision:531396 (Only the first 10 of 67 ports in this commit are shown above. View all ports for this commit)
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4

  - Update py-sip to 4.19.21
  - Update qscintilla2 to 2.11.4
  - Replace MASTER_SITE_RIVERBANK with https versions
  - Replace QSCI2_DISTNAME to match with the new one

PR:		245308
Approved by:	tcberner (mentor)
Exp-run by:	antoine
Wed, 1 Apr 2020
[ 19:59 lbartoletti search for other commits by this committer ] Original commit   Revision:530236 (Only the first 10 of 41 ports in this commit are shown above. View all ports for this commit)
databases/grass7, math/saga, graphics/qgis and graphics/qgis-ltr: update to
latest versions

    - math/saga:
        - Update to 7.6.2
        - Use wxWidgets 3.0+ instead of 3.1+ since 3.1 is not a mandatory
version and this reduces the number of packages installed when you install saga
and qgis/grass (which requires version 3.0).

    - databases/grass7:
        - Update to 7.8.2 first version for python3 only
        - Use ${PY_NUMPY} variable
        - Readd openmp
        - Use wxPython40 for python3
        - Remove bash dependency. You can use any shell.
        - Rework the workaround in post-install (for / touch files). Fix the
long (random) standing issue with pkg-plist
        - Alphabetize USES and OPTIONS
        - Replace XX_configure_on by XX_configure_with as possible
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 24 Mar 2020
[ 19:54 antoine search for other commits by this committer ] Original commit   Revision:529063 (Only the first 10 of 87 ports in this commit are shown above. View all ports for this commit)
Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai
Sat, 21 Mar 2020
[ 07:24 tcberner search for other commits by this committer ] Original commit   Revision:528829 (Only the first 10 of 31 ports in this commit are shown above. View all ports for this commit)
devel/qca: update to 2.3

- qca-2.3 drop support for OSSL<1.1
- copy devel/qca to devel/qca-legacy which is held at the current version
- update devel/qca to 2.3
- Add Uses/qca.mk which handles dependency on either of the ports depending on
  the FreeBSD version

Users on FreeBSD11 must therefore change their pkg orign a la:

   pkg set -o devel/qca:devel/qca-legacy

PR:		244682
Exp-run by:	antoine
Reviewed by:	arrowd
Differential Revision:	https://reviews.freebsd.org/D24042
Sun, 23 Feb 2020
[ 11:02 lbartoletti search for other commits by this committer ] Original commit   Revision:526917 (Only the first 10 of 16 ports in this commit are shown above. View all ports for this commit)
graphics/qgis-ltr, graphics/qgis: Fix build after textproc/txt2tags update

The FreeBSD package builder complains about encoding problems after [1]. This
happens, because newer versions of textproc/txt2tags do not need the option
'--encoding=utf-8' any more[2].

The patch is a workaround to remove such encoding entries from the QGIS port,
until QGIS project changes upstream for newer txt2tags versions.

While I'm here, replace sed commands by a patch file [3]

[1] http://svnweb.freebsd.org/changeset/ports/525495
[2] https://github.com/txt2tags/txt2tags/blob/v3/CHANGELOG.md#35-2020-02-01
[3] https://reviews.freebsd.org/D23188#511597

PR:	243998, 243996
Submitted by:	Rainer Hurling (maintainer)
Reviewed by:	lbartoletti
Approved by:	tcbernor (mentor)
Differential Revision:	https://reviews.freebsd.org/D23602
Thu, 6 Feb 2020
[ 19:17 lbartoletti search for other commits by this committer ] Original commit   Revision:525400
databases/grass7: add SONAME and use new path for graphics/qgis*

    - Add SONAME (upstreamed) [1]
    - Remove the (bad) idea to keep a symlink to the old path logic
(grass-M.m.b)
    - Fix FindGRASS.cmake for graphics/qgis and graphics/qgis-ltr (upstreamed)
[2]

    [1] https://github.com/OSGeo/grass/pull/301
    [2] https://github.com/qgis/QGIS/pull/34088

PR:		https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=243736
Approved by:	Rainer Hurlin (maintainer), tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D23470
Thu, 23 Jan 2020
[ 15:40 lbartoletti search for other commits by this committer ] Original commit   Revision:523934
textproc/txt2tags: Update to 3.4, fix graphics/qgis and graphics/qgis-ltr with
this newest version

    - Use python3 only [1]
    - Fix graphics/qgis and graphics/qgis-ltr with txt2tags-3.4 (remove
--css-sugar --css-inside) [2][3]

Changelog:

    https://github.com/txt2tags/txt2tags/blob/v3/CHANGELOG.md

  [1] txt2tags v3 can use python2 too. But, only graphics/qgis* uses it and
depends on python3. I want to avoid adding dependencies. And python2 is dead,
isn't it? ;)
  [2] https://github.com/txt2tags/txt2tags#feature-differences-between-versions
  [3] https://github.com/qgis/QGIS/issues/33516

PR:	243368
Reviewed by:	tcberner
Approved by:	Rainer Hurling (qgis maintainter), tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D23188
Wed, 22 Jan 2020
[ 06:02 sunpoet search for other commits by this committer ] Original commit   Revision:523793 (Only the first 10 of 28 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for graphics/gdal shlib change
Fri, 20 Dec 2019
[ 16:40 rakuco search for other commits by this committer ] Original commit   Revision:520519
Update to 3.10.1.

For some months now, the build process of graphics/qgis 3.8.2 had problems
while using the QT5 QMap() function with large list like for proj6[1].
Compiling such long QMap() list with clang takes several hours instead of
some seconds or minutes[2], often it breaks the build.

It turns out that building that QMap() code with clang takes exhaustive
memory[3], for which a nice patch already exists on OpenBSD[4]. While this
OpenBSD patch builds fine on amd64, it needs another patch on i386 (usage of
'-O1' instead the clang specific patch '-mllvm -inline-threshold=128').

After we found a solution for the QMap problem, it was necessary to wait for
the release of QGIS 3.10.1 because of some tricky problems with proj6 / gdal
combinations[5] that should be avoided.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 25 Oct 2019
[ 23:41 tcberner search for other commits by this committer ] Original commit   Revision:515671 (Only the first 10 of 64 ports in this commit are shown above. View all ports for this commit)
math/gsl: update to 2.6

- math/p5-Math-GSL does not seem to have any upstream activity to make it work
with this version -> mark it broken
  - this also breaks the two consumers of this port

- biology/gemma: has a conflict with cblas, and is makred broken.

PR:		241363
Exp-run by:	antoine
Thu, 29 Aug 2019
[ 05:50 pi search for other commits by this committer ] Original commit   Revision:510143
graphics/qgis: upgrade 3.6.2 -> 3.8.2

- Force clang version 9.x from ports
- Update several Python dependencies
- Add devel/py-geojson, devel/py-nbformat, math/py-networkx,
  graphics/py-pillow, graphics/py-scikit-image, and
  devel/py-shapely for Python extension
- Add -DCMAKE_POLICY_DEFAULT_CMP0056:STRING=NEW

PR:		240124
Submitted by:	Rainer Hurling <rhurlin@gwdg.de> (maintainer)
Relnotes:	https://www.qgis.org/en/site/forusers/visualchangelog38/index.html
Fri, 26 Jul 2019
[ 20:46 gerald search for other commits by this committer ] Original commit   Revision:507372 (Only the first 10 of 3853 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
Fri, 10 May 2019
[ 18:19 fernape search for other commits by this committer ] Original commit   Revision:501190
graphics/qgis: update to 3.6.2

ChangeLog can be found here:
https://qgis.org/en/site/forusers/visualchangelog36/index.html

* Update several Python dependencies
* Add USES=gnome, USE_GNOME=libxml2, USE_QT=gamepad, and
  LIB_DEPENDS=libsz.so:science/szip to pet 'make DEVELOPER=yes'
* Remove 'world writeable rights' in pkg-plist (bug #237070, comment #1)

PR:	237755
Submitted by:	rhurlin@gwdg.de (maintainer)
Mon, 8 Apr 2019
[ 16:02 swills search for other commits by this committer ] Original commit   Revision:498380
graphics/qgis: Update to 3.6.1

PR:		237025
Submitted by:	Rainer Hurling <rhurlin@gwdg.de> (maintainer)
Sat, 16 Mar 2019
[ 20:48 tcberner search for other commits by this committer ] Original commit   Revision:495958
x11-toolkits/qwt6: remove flavors (Qt4 deprecation)

Approved by:	portmgr (implicit)
[ 20:16 tcberner search for other commits by this committer ] Original commit   Revision:495954 (Only the first 10 of 28 ports in this commit are shown above. View all ports for this commit)
devel/qca: remove flavors (Qt4 deprecation)
[ 20:00 tcberner search for other commits by this committer ] Original commit   Revision:495952
devel/qjson: remove flavors (Qt4 deprecation)
[ 18:46 tcberner search for other commits by this committer ] Original commit   Revision:495941 (Only the first 10 of 15 ports in this commit are shown above. View all ports for this commit)
security/qtkeychain: remove flavors (Qt4 deprecation)

Approved by:	portmgr (implicit)
Wed, 13 Mar 2019
[ 23:40 wen search for other commits by this committer ] Original commit   Revision:495667
- Mark CONFLICTS_INSTALL with qgis-ltr

PR:		236451
Submitted by:	lbartoletti@tuxfamily.org
Approved by:	maintainer
Sat, 2 Mar 2019
[ 17:45 sunpoet search for other commits by this committer ] Original commit   Revision:494422 (Only the first 10 of 31 ports in this commit are shown above. View all ports for this commit)
Update science/netcdf to 4.6.3

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/Unidata/netcdf-c/releases
		https://github.com/Unidata/netcdf-c/blob/master/RELEASE_NOTES.md
Tue, 26 Feb 2019
[ 21:13 swills search for other commits by this committer ] Original commit   Revision:493982
graphics/qgis: Update to 3.6.0

PR:		235961
Submitted by:	Rainer Hurling <rhurlin@gwdg.de> (maintainer)
Sat, 2 Feb 2019
[ 06:48 danfe search for other commits by this committer ] Original commit   Revision:491916
- Update `databases/grass7' to version 7.6.0
- Reformat pkg-message for better readability
  and kill stray EOL whitespace

PR:		235307
Submitted by:	maintainer
Wed, 16 Jan 2019
[ 11:13 tijl search for other commits by this committer ] Original commit   Revision:490472 (Only the first 10 of 1089 ports in this commit are shown above. View all ports for this commit)
Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 15 Jan 2019
[ 21:30 tcberner search for other commits by this committer ] Original commit   Revision:490430 (Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
graphics/qgis: update to 3.4.3

QGIS 3.4 LTR, the first long-term release (LTR) of QGIS 3.

This is a major upgrade and users should consult the UPDATING entry
provided for further information on how to progress.

http://changelog.qgis.org/en/qgis/version/3.4-LTR/

PR:		233726
Submitted by:	Rainer Hurling <rhurlin@gwdg.de> (maintainer)
Mon, 7 Jan 2019
[ 18:31 antoine search for other commits by this committer ] Original commit   Revision:489603
Fix build with DEFAULT_VERSIONS=python=3.x

PR:		234633
Wed, 12 Dec 2018
[ 01:35 gerald search for other commits by this committer ] Original commit   Revision:487272 (Only the first 10 of 3168 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590
Sun, 2 Dec 2018
[ 15:41 rene search for other commits by this committer ] Original commit   Revision:486467 (Only the first 10 of 464 ports in this commit are shown above. View all ports for this commit)
Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741
Wed, 28 Nov 2018
[ 08:17 wen search for other commits by this committer ] Original commit   Revision:486082
- Update to 2.18.26
- Change LIB_DEPENDS from qwt5 to qwt6
- Reorder CMAKE_ARGS
- Adapt QWT_INCLUDE_DIR and QWT_LIBRARY after PyQt changes
- Update GRASS7 dependency from 7.2.2 to 7.4.0
- Update several Python dependencies
- Remove INSTALLS_ICONS, not needed here

PR:		233504
Submitted by:	rhurlin@gwdg.de(maintainer)
Thu, 22 Nov 2018
[ 20:18 tcberner search for other commits by this committer ] Original commit   Revision:485614 (Only the first 10 of 154 ports in this commit are shown above. View all ports for this commit)
pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714
Thu, 28 Jun 2018
[ 17:39 tcberner search for other commits by this committer ] Original commit   Revision:473503 (Only the first 10 of 1416 ports in this commit are shown above. View all ports for this commit)
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Number of commits found: 241 (showing only 100 on this page)

1 | 2 | 3  »