Number of commits found XX: 68

- fix build with -fcommon

- update to 3.1

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

- fix build with clang4
PR:		216216

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Update giflib to 5.1.1

PR:		204492

- rename MAN1

Convert to USES=jpeg

Update graphics/giflib to 5.0.5

Differential Revision:	https://reviews.freebsd.org/D1361
Submitted by:	bapt
Reviewed by:	self
Exp-run by:	self

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

(Only the first 15 lines of the commit message are shown above )

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

math/fftw3:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Use MAKE_CMD

- fix order in USES

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

(Only the first 15 lines of the commit message are shown above )

- use STAGEDIR
- take maintainership

- USES=gmake
- update LIB_DEPENDS
- use OPTIONS_SUB, OPT_* macros

- use new LIB_DEPENDS style

- fix misplaced NO_STAGE in slaveports and ifdefs

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Convert g* to USES=pkgconfig

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility

This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG

it can take the following arguments:
 - yes (meaning build only dep)
 - build (meaning build only dep)
 - run (meaning run only dep)
 - both (meaning run and build dep)

From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.

While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config

With Hat:	portmgr
Exp-runs by:	bapt (pointhat-west), beat (pointyhat)

For the ports that are maintained by ports@ that have pkgconfig as their
only USE_GNOME feature, convert to a BUILD_DEPENDS. This avoids both the
bug of the bogus run depend introduced by bsd.gnome.mk, and also avoids
needlessly pulling that file in.

Convert to new option framework

Reassign to ports@

Update to 0.9.2

Replace obsolete libungif dependency by libgif.

PR:             ports/165335
Submitted by:   dinoex@
Approved by:    cs@ (maintainer), glarkin@ (mentor, implicit)

Update lame to 3.99.3.
Bump portrevision of all ports which depend upon it.

Chase pdflib.so version and bump PORTREVISION accordingly.

- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:   ache, C. Burns, wen

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Change maintainer address to my FreeBSD address

Approved by:    wen@ (mentor)

- Add missing math/fftw3 to LIB_DEPENDS
- Add OPTION for print/pdflib support
- Fix disabling WITH_LAME to effect properly

PR:             148559
Submitted by:   Ports Fury
Approved by:    maintainer

- Update to 0.9.1
- Pass maintainership to submitter
- Add LICENSE
- Add distfile mirror
- Mark MAKE_JOBS_SAFE

PR:             148377
Submitted by:   C-S <c-s@c-s.li>
Feature safe:   yes

- update to jpeg-8

- update to jpeg7
Tested by:      pav on pointyhat

- Update to 0.9.0

PR:             134288
Submitted by:   Ports Fury

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 0.8.1

PR:             109801
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Fix LIB_DEPENDS
- Add common patch for Xpdf library
- Bump PORTREVISION

PR:             108882
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

upgrade to 0.8.0

Remove USE_REINPLACE for categories starting with a G

- Update to 0.7.0

PR:             ports/85533
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 0.6.3
- Make lame support optional so this can be
  packaged

PR:             77971
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update to version 0.6.2

PR:             ports/72530
Submitted by:   Ports Fury

Update to version 0.6.1

PR:             ports/70788
Submitted by:   Ports Fury

upgrade to 0.6.0

- Update to version 0.5.1

PR:             ports/64335
Submitted by:   Ports Fury

USE_BISON to unbreak the build.

BROKEN: Does not compile

- Update to version 0.5.0

PR:             ports/62532
Submitted by:   Ports Fury

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Update to 0.4.4.

PR:             51226
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

chase t1lib version

de-pkg-comment

graphics/swftools to 0.4.3

PR:             ports/46942
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 0.4.2

PR:             42244
Submitted by:   tkato@prontomail.com

Update to 0.4.1

PR:             ports/40899
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Add USE_REINPLACE where appropriate.

Update to 0.4.0

PR:             39434
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 0.3.1

PR:             38785
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

add swftools 0.2.2   SWF manipulation and generation utilities    

Number of commits found XX: 68

21 vulnerabilities affecting 104 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-07-03 08:06:05