14:25 nemysis 

- Bump dependent ports' revisions (graphics/ilmbase and graphics/OpenEXR)

Approved by:	wg (mentor)

 

00:32 nemysis 

graphics/ilmbase

- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Remove conflict with non existent Port
- USES pathfix pkgconfig
- Add executable
- Add DOCS Option
- Support STAGEDIR and add OPTIONS_SUB
- Use pathfix instead of simple patches
- Adjust patches
- Change WWW

graphics/OpenEXR

- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Use the new format for LIB_DEPENDS
- USES gmake pathfix pkgconfig
- Add DOCS and EXAMPLES Options
- Support STAGEDIR and add OPTIONS_SUB
- Change REINPLACE_CMD
- Add extra patch for EXAMPLES
- Remove obsolete patches

- Bump dependent ports' revisions

Approved by:	pawel / wg (mentors)

 

18:35 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

 

22:50 bapt 

Eradicate USE_GNOME=pkgconfig from graphics
While here:
- trim headers
- convert:
  * USE_GNOME=gnomehack -> USES=pathfix
  * USE_GMAKE=yes -> USES=gmake
  * USE_PERL5 -> USES=perl5

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

17:00 antoine 

Unbreak after PORT_OPTIONS conversion

 

15:59 bapt 

Convert to new options framework

 

08:57 bapt 

Rely on bsdtar to autodetermine the format of the distfiles when possible

For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.

Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

08:17 pclin 

- graphics/libexif:
  * Update to 0.6.21
  * Add LICENSE
  * Switch to OptionsNG and PORTDOCS
- Document libexif 2012-07-12 vulnerabilty
- Bump PORTREVISION for libexif related ports
- Trim headers while here

PR:		ports/175910
Approved by:	swills (mentor)
Security:	d881d254-70c6-11e2-862d-080027a5ec9a

 

16:05 swills 

- Chase lib version changes from ilmbase and OpenEXR updates

 

12:32 az 

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

05:26 dinoex 

- update png to 1.5.10

11:01 linimon 

Mark broken on sparc64-9: fails to compile.

Hat:            portmgr

10:08 bf 

- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:   ache, C. Burns, wen

14:51 pav 

- Fix plist

Reported by:    pointyhat

22:29 mi 

Upgrade from 7.14.5 to 7.26.3.

Requested by:   Doug Fortune

02:13 wen 

- Bump PORTREVISION to chase the update of libexif

20:04 pgollucci 

- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.

PR:             ports/153292
Submitted by:   myself (pgollucci)
Tested by:      -exp run by pav
Approved by:    portmgr (pav)

07:34 ade 

Sync to new bsd.autotools.mk

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

11:11 dinoex 

- update to jpeg7
Tested by:      pav on pointyhat

20:25 mi 

Guard against configure finding some headers in the wrong places by
explicitly specifying, where includes and libraries are located. A
user reported a problem, when building nip2 with mingw32 installed...

20:45 mi 

Upgrade vips and nip2 to 7.14.5 from 7.14.4.1 and 7.14.4 respectively.

15:27 mi 

Spell-out the DISTFILES -- the earlier use of DISTVERSION was causing
troubles... When the author goes back to X.Y.Z releases, this will not
be neccessary, but the current latest version is 7.14.4-1 (the dash
instead of dot is not acceptable for PORTVERSION).

Investigated by:        pav

12:21 mi 

Update from 7.12.x to 7.14.4. Switch to GraphicsMagick.

13:35 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

03:50 marcus 

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

17:46 nork 

Chase OpenEXR library version bumped.

16:17 mi 

Add libxml2 to the list of the required GNOME-components.

Prompted by:    build failure   (via kris)
Confirmed by:   software author

16:50 mi 

Unbreak and update the two ports to the latest version of 7.12.4.
Take over maintainership temporarily upon request from the software's
author(s), who were unable to reach the previous maintainer.

In both:
        - use explict --mandir=${PREFIX}/man to avoid man-pages getting
          into ${PREFIX}/shared/man incorrectly
        - deal with the NOPORTDOCS situation by simply not-extracting
          the extra documentation from the distribution tarball
        - parallelize the build to scale with the number of CPUs

In vips:
        - move the (giant) list of man-pages into a separate Makefile.man
        - turn the pages, which contain only `.so other-page', into
          MANLINKS (specified in Makefile.man)
        - provide a "maintainance target" to regenerate the Makefile.man
          during the next upgrade
        - do not install the HTML-ized versions of man-pages
        - create OPTIONS for use of devel/liboil and graphics/ImageMagick
          (OPTION to use PYTHON awaits portmgr's decision/action)

In nip2:
        - do install the HTML pages regardless of NOPORTDOCS -- these
          are accessible to the user through the application GUI
        - arrange for update-mime-database and update-desktop-database
          to be run upon install (@exec) and uninstall (@unexec)
        - LIB_DEPEND on math/gsl, which nip2 can use for extra functionality

These ports are in need of a dedicated maintainer.

Approved by:    maintainer timeout

01:05 mi 

Unbreak, un-deprecate by adding the missing build-dependencies. Reset
maintainer for the time being.

PR:     109658
Submitted by:   Eric P. Scott   (on Feb 27, 2007)
Approved by:    maintainer timeout

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

01:23 kris 

Schedule these broken ports for removal on 2007-04-10 if they are still
broken at that time and no fix has been submitted.

01:53 kris 

BROKEN: Missing dependency

15:00 lev 

  Update to latest vips-7.10.21

15:12 ahze 

- Chase fftw3 libver bump

23:46 edwin 

Remove USE_REINPLACE for categories starting with a G

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

18:13 lev 

  Update to latest version 7.10.10

18:00 lev 

 Developers replaced ditfile AGAIN.
 Here are review of diff between old nad new distfiles:

 (1) libdata upgrades.
 (2) pkg-config files added (vips.pc and vipsCC.pc).
 (3) Some small bugs fixed.
 (4) Two programs added to build.
 (5) Some debug code was removed.

 Your could check, that distfile was replaced by visiting
 official site and reading news.

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

08:02 lev 

  Here are changes between `old' and `new' distfiles (distfile was replaced in
  previous commit):

  (1) One item in TODO
  (2) Fix in `configure', `aclocal.m4' and `config/acinclude.m4' to properly
      find libfftw
  (3) Version string changed in `include/vips/version.h'

13:29 lev 

 Authors replaced source tarball.

20:32 lev 

  Upgrade to latest version 7.8.14.

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

12:41 kris 

Fix plist and bump PORTREVISION

11:14 edwin 

Fix pkg-plist

Noticed by: bento
    http://bento.freebsd.org/errorlogs/i386-4-exp-latest/vips-7.8.12.log

Informed maintainer.

14:06 lev 

Add vips-7.8.12 - Free image processing system