Riece is an IRC client for Emacs. It provides the following features:
- Several IRC servers may be used at the same time.
- Essential features can be built upon the extension framework (called
"add-on") capable of dependency tracking.
- Installation is easy. Riece doesn't depend on other packages.
- Setup is easy. Automatically save/restore the configuration.
- Riece uses separate windows to display users, channels, and
dialogues. The user can select the window layout.
- Step-by-step instructions (currently written in Japanese) are included.
- Mostly compliant with RFC 2812.
===> The following configuration options are available for riece-9.0.0_29,1:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
To use riece, add the following line to your Emacs configuration:
(autoload 'riece "riece" "Start Riece" t)
Some add-ons (e.g. riece-async, riece-rdcc) require Ruby.
If you use them, you need to install Ruby from port or package.
Emacs Lisp ports framework: Overhaul
This overhaul introduces four key changes to the elisp ports framework:
1. Remove support for packaged byte-compiled elisp.
The primary motivation is to remove a large number of flavor-specific
packages and to simplify the ports tree. As an example, supporting
byte-compiled elisp for devel/tablist required six packages, one for
each flavor of editors/emacs and editors/emacs-devel. With over 100
elisp ports and requests for new Emacs flavors, this was
unmanageable.
2. Install configuration to integrate with Emacs's native compilation
machinery, allowing elisp from ports to be compiled into the standard
(Only the first 15 lines of the commit message are shown above )
Chase major version update of editors/emacs-devel
Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.
Sponsored by: The FreeBSD Foundation
Chase editors/emacs update to 29.4
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish, yasu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45705
Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44492
*/*: Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43615
editors/emacs: Update to 29.1
* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
TREESITTER are ON by default. PGTK and WEBP options are excluded
from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
irc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* A. Gabriel <backslash@BSDCode.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Alfred Perlstein <alfred@FreeBSD.org>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
* Ben Hutchinson <benhutch@xfiles.org.uk>
* Bill Fumerola <billf@chc-chimes.com>
* Chess Griffin <chess@chessgriffin.com>
* Chris Piazza <cpiazza@FreeBSD.org>
* Craig Edwards <brain@mail1.chatspike.net>
(Only the first 15 lines of the commit message are shown above )
editors/emacs: Update to version 27.1
Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
editors/emacs-devel: Update to latest master branch commit, 4f2b415
This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.
Submitted by: ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D23012
Bump PORTREVISION for ports using EMACS_VERSION_SITE_LISPDIR
This is required after editors/emacs was updated to version 26.3 in
r510281.
Reported by: ashish
Bump PORTREVISION for ports using EMACS_VERSION_SITE_LISPDIR
This should have been done with r499179 when editors/emacs was updated
to version 26.2.
Reported by: nobutaka
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Flavorize and modernize Emacs ports
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
irc/riece: Back to the pool
While I'm here:
Improve license
Set architecture neutral
PR: 220252
Submitted by: Yasuhiro KIMURA <yasu@utahime.org> (old maintainer)
Approved by: garga (mentor)
Differential Revision: https://reviews.freebsd.org/D11363
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
GNU Emacs updates
editors/emacs:
- Update to 24.3
- Update CANNA patchset[1]
- Unbreak ARM support by using the patch from emacs-devel port
- Add missing INSTALLS_ICONS[2]
- Remove a patch which is already integrated upstream
- Fix Makefile header
editors/emacs-devel:
- Update to bzr revision 112178
- Fix Makefile header
- Add missing INSTALLS_ICONS[2]
(Only the first 15 lines of the commit message are shown above )
- update to 9.0.0 [2]
- trim Makefile header [2]
- add message to pkg-message that some add-ons require Ruby [2]
- remove dependency on ruby, since it is only needed for some add-ons [1]
while here:
- convert to optionsng
- trim Makefile header from riece-emacs21
PR: 173360
Submitted by: Seiji Ohashi <sayzbrdg@gmail.com> [1],
KIMURA Yasuhiro <yasu@utahime.org> [2] (maintainer)
Feature safe: yes
Changes to editors/emacs and Mk/bsd.emacs.mk were taken from
PR/137956 by Ashish SHUKLA (thanks!). [1]
Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.
Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.
Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
- Fix possibility of "infinite make fork" when "Registering install for ..."
EMACS ports. [1]
- Allow building a port as root using an NFS-mounted /usr/ports if the
server maps root to a UID other than root. [2]
- Make 'BROKEN' and 'IGNORED' ports exit their "make install" with a fail
status rather than success. [3]
- Improve behavior when dealing with versioned dependencies. [4]
- Fix false positives in check-conflicts target. [5]
- Remove obsolete bzip2 code. [6]
(Only the first 15 lines of the commit message are shown above )
Since ports/75832 is already closed by committing a workaround, this port
should not be marked BROKEN on ia64 now.
PR: ports/83972
Submitted by: KIMURA Yasuhiro <yasu@utahime.org> (maintainer)
Bump PORTEPOCH because the PORTVERSION is changed from
1.4.0 to 1.0.4 due to the repocopy and it prevents upgrading
with portupgrade.
Approved by: KIMURA Yasuhiro (yasu at utahime dot org) (maintainer)
Add irc/riece (and irc/riece-emacs20, repocopy'd from irc/liece*), which
is an IRC client for Emacs. Riece is a redesign of the Liece IRC client.
Prodded by: nork
PR: ports/67852
