dvipsk DVI to PostScript translator + Japanese patch

5.95b_14 japanese =3 5.95b_14Version of this port present on the latest quarterly branch.

DEPRECATED: Not staged. See http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-May/000080.html
This port expired on: 2014-08-31

Maintainer: hrs@FreeBSD.org

Port Added: unknown

Last Update: 2014-07-23 14:07:01

SVN Revision: 362675

People watching this port, also watch: python

Also Listed In: print

License: not specified in port

Description:

Dvipsk converts a DVI file produced by TeX (or other program) to a PostScript file. Missing fonts can be automatically generated if METAFONT exists on the system, or can be converted from `gf' to `pk' format on demand. Dvips also supports `tpic', `psfig', `emtex', and `METAPOST'.

SVNWeb

There is no configure plist information for this port.

Dependency lines:

• ja-dvipsk-tetex>0:japanese/dvipsk

No installation instructions: this port has been deleted.

The package name of this deleted port was: ja-dvipsk-tetex

PKGNAME: ja-dvipsk-tetex

Flavors: there is no flavor information for this port.

distinfo:

There is no distinfo for this port.

Dependencies

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

1. min10.tfm : japanese/ptex
2. LICENSE.texmf : print/teTeX-texmf
3. mktexlsr : print/teTeX-base
4. gmake : devel/gmake

Runtime dependencies:

1. min10.tfm : japanese/ptex
2. LICENSE.texmf : print/teTeX-texmf
3. mktexlsr : print/teTeX-base
4. indexinfo : print/indexinfo

Library dependencies:

1. libpng15.so : graphics/png
2. libwwwcore.so : www/libwww
3. libt1.so : devel/t1lib

NOTE: dependencies for deleted ports are notoriously suspect

This port is required by:

for Build

Deleted ports which required this port:

Expand this list of 1 deleted port
1. japanese/latex2html^*
2. Collapse this list of deleted ports.

for Run

Deleted ports which required this port:

Expand this list of 1 deleted port
1. japanese/platex-otf^*
2. Collapse this list of deleted ports.

* - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

Configuration Options

No options to configure

Master Sites:

1. ftp://ctan.tug.org/tex-archive/obsolete/systems/unix/teTeX/3.0/distrib//
2. ftp://ctan.unsw.edu.au/tex-archive/obsolete/systems/unix/teTeX/3.0/distrib//
3. ftp://ftp.chg.ru/pub/TeX/CTAN/obsolete/systems/unix/teTeX/3.0/distrib//
4. ftp://ftp.dante.de/tex-archive/obsolete/systems/unix/teTeX/3.0/distrib//
5. ftp://ftp.funet.fi/pub/TeX/CTAN/obsolete/systems/unix/teTeX/3.0/distrib//
6. ftp://ftp.kddlabs.co.jp/CTAN/obsolete/systems/unix/teTeX/3.0/distrib//
7. ftp://ftp.tex.ac.uk/tex-archive/obsolete/systems/unix/teTeX/3.0/distrib//
8. ftp://mirror.macomnet.net/pub/CTAN/obsolete/systems/unix/teTeX/3.0/distrib//
9. http://distcache.FreeBSD.org/ports-distfiles/teTeX/
10. http://ring.nict.go.jp/archives/text/CTAN/obsolete/systems/unix/teTeX/3.0/distrib//

• port moved to print/tex-dvipsk on 2014-07-23
  REASON: Use TeXLive version
  

Remove some teTeX bits

Modernize LIB_DEPENDS

With hat:	portmgr

Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Categories J-L.

CR:		D305
Approved by:	portmgr (swills)

Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends

With hat:	portmgr

- Convert gmake,bzip2 to USES

Approved by:	portmgr

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

Mark USE_TEX=tetex.

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

- Add CONFLICTS as a preparation of importing new TeX ports based on TeXLive.
  No functional change.
- Style fixes.

- update png to 1.5.10

- Remove unnecessary PKGNAMEPREFIX declaration
- Remove obsolete MD5 checksum while I'm here

PR:             ports/153634
Submitted by:   sunpoet (myself)
Approved by:    pav (with portmgr hat)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update MASTER_SITE_SUBDIR.

Migrate japanese/ptex{,-base,-tetex} to japanese/ptex; the old version
of japanese/ptex has been removed and japanese/ptex-tetex has been
renamed with japanese/ptex.  These are almost the same with each other
(actually ptex-tetex had some upper compatibility with ptex), so there
should be no functionality regression.

Also, dependencies of the relevant ports have been updated and
PORTREVISON bumped.

Fix pkg-plist.

Spotted by:     pointyhat

BROKEN: Incomplete pkg-plist

Fix a bug that prevents installing texmf-config/dvips/ptex/config/config.ps.
Bump PORTREVISION.

Pointy hat to:  hrs
Spotted by:     linimon

- Add support for the new updmap(1).
- Bump PORTREVISION.

Update distinfo and bump PORTREVISION because the distfile
is updated again.  Change the master site to prevent further
unreasonable distfile replacing.

Approved by:    portmgr (erwin)

Update distinfo because the distfile has been replaced
with no actual change.

Spotted by:     pointyhat
Approved by:    portmgr (erwin)

The default security option has been changed in the Japanese
patchset without version number bump.  Now -R (or -R1) is
used, and this behavior is compatible with prior versions
including 5.95a.  Bump PORTREVISION.

Spotted by:     SHIOZAKI Takehiko (st at be dot to)

Fix pkg-plist.

Spotted by:     pointyhat

- Fix pkg-plist.
- Add a missing ${CAT} ${PKGMESSAGE} into the post-install target.
- Change the name of the Japanese font map file from kanji.map to
  psfonts_jp.map.

BROKEN: Incomplete pkg-plist

Update to 5.95b+1.7a.

Fix MASTER_SITES.

Noticed by:     kris

Add the missing MLINKS.

Noticed by:     kris

Update to 5.95a.  The updmap-ptex and updmap-sys-ptex utilities
are moved to japanese/ptex-tetex now.

Add teTeX-3.0 support.

- Update the Japanese patch to 1.6a.
- Remove dependency on tetex-modesw in print/tex-texmflocal.
- Use updmap.cfg to generate font map files.  updmap-ptex, a
  wrapper script of updmap(1) for pTeX support has been added.
- $TEXCONFIG has been set to $TEXMF/dvips{-ptex,}// by default.

- Add USE_GMAKE=yes.
- s/cp -r/cp -R/.

- Update to 5.94a.
- Add odvips/udvips support.
- Fix pkg-descr.
- Fix kpathsea searching order.  This (Japanese version
  of dvipsk) now uses $TEXMF/web2c-ptex/texmf.cnf first.

Approved by:    linimon (mentor)

Fix dependencies (print/teTeX-*) and add some style changes.

Approved by:    linimon (mentor)

Update to 5.92b, and depend on print/teTeX.

Approved by:    linimon (mentor)

Add size data, approved by maintainers.

- Assign maintainership to submitter

PR:             ports/63435
Submitted by:   hrs
Approved by:    Makoto WATANABE <watanabe@z.phys.nagoya-u.ac.jp>

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Fix the dependencies after the upgrade of japanese/ptex.
I am committing this since the maintainer did not respond to my request to check
on this problem in past two days, this can be a temporary fix.
Submitted by:   Harold Gutch <logix@foobar.franken.de>

De-pkg-comment.

Change default behavior for dvips:  Make english fonts ready for  
`cut-and-paste'after PDF conversion by ghostscript.    

Portrevision bump (both), make dvipsk-vflib portlint compatible.    

exec mktexlsr at installation and deinstallation.   This is mandatory for this
version of dvipsk to work correctly.    

japanese/dvipsk cannot depends on file ptex-common but MakeTeXPK     Fixed by
the same reason as  ports-jp 10700 (Request from maintainer).    

Change PKGDIR from pkg/ to .  Also fix places where ${PKGDIR} is   spelled out
(many of which are ${PKGDIR}/MESSAGE -> ${PKGMESSAGE} type   fixes that
shouldn't have been necessary) and the string "/pkg/"   appear.    

Convert category japanese to new layout.  

14 vulnerabilities affecting 115 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-08-13 11:49:23