| non port: japanese/scim-anthy/Makefile |
|
SVNWeb
|
Number of commits found: 58 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 8d9b67b (Only the first 10 of 220 ports in this commit are shown above. )
japanese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Daichi GOTO <daichi@FreeBSD.org>
* Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
* David O'Brien (obrien@cs.ucdavis.edu)
* Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
* FUJISHIMA Satsuki <sf@FreeBSD.org>
* Fumihiko Kimura <jfkimura@yahoo.co.jp> (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 1 May 2021
|
[ 17:55 Tobias Kortkamp (tobik) ] 6707a3c (Only the first 10 of 47 ports in this commit are shown above. )
Clean up some things
- Fix typos
- Remove duplicate variables
- Remove nop variables
- Clean up commented PORTREVISION
- Add missing USES
Reported by: portscan
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 10 Jan 2021
|
[ 11:08 nobutaka ]  
- Fix build error with Clang 11.
- Add undeclared dependencies.
PR: 252535
Submitted by: Tomoyuki Sakurai <trombik1973@gmail.com>
|
|
Fri, 24 Jul 2020
|
[ 06:28 rigoletto ] (Only the first 10 of 52 ports in this commit are shown above. )
Mk/bsd.sites.mk: Update URL of MASTER_SITE_OSDN to one that supports
geographical load balancing
- update all affected ports
PR: 244164
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
Differential Revision: https://reviews.freebsd.org/D24955
|
|
Sat, 14 Sep 2019
|
[ 15:54 nobutaka ]
Bump PORTREVISION for the update of japanese/anthy.
|
|
Fri, 31 Aug 2018
|
[ 22:07 tobik ]
japanese/scim-anthy: Fix build with Clang 6
/usr/local/include/scim-1.0/scim_types.h:38:11: warning: '__STDC_ISO_10646__'
macro redefined [-Wmacro-redefined]
# define __STDC_ISO_10646__
^
<command line>:6:9: note: previous definition is here
#define __STDC_ISO_10646__ 1
^
scim_anthy_prefs.cpp:98:9: error: cannot initialize a member subobject of type
'void *' with an rvalue of type 'bool'
false,
^~~~~
http://beefy12.nyi.freebsd.org/data/head-amd64-default/p478276_s338342/logs/errors/ja-scim-anthy-1.2.7_5.log
- scim-anthy finds dependencies in LOCALBASE on its own
- __STDC_ISO_10646__ no longer needs to be specified manually
- Add license while here
|
|
Sat, 24 Mar 2018
|
[ 21:12 sunpoet ] (Only the first 10 of 52 ports in this commit are shown above. )
Rename MASTER_SITE_SOURCEFORGE_JP to MASTER_SITE_OSDN
PR: 225609
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
|
|
Fri, 1 Apr 2016
|
[ 14:08 mat ] (Only the first 10 of 481 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 2 Aug 2015
|
[ 15:03 tijl ] (Only the first 10 of 234 ports in this commit are shown above. )
By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 31 Aug 2014
|
[ 13:19 tijl ] (Only the first 10 of 22 ports in this commit are shown above. )
textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
|
|
Thu, 24 Apr 2014
|
[ 18:24 tijl ]
- Convert to USES=libtool.
- New LIB_DEPENDS syntax.
- Remove references to PTHREAD_CFLAGS and PTHREAD_LIBS.
- Staging.
|
|
Sat, 12 Oct 2013
|
[ 18:32 ume ]
Reassign some my scim related ports to the heap.
I'm not using scim for a long time.
|
|
Fri, 20 Sep 2013
|
[ 18:47 bapt ] (Only the first 10 of 352 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)
|
|
Fri, 13 Sep 2013
|
[ 21:39 antoine ]
Add an explicit dependency on pkgconf
Approved by: portmgr (bapt)
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Sun, 10 Jun 2012
|
[ 18:42 swills ] (Only the first 10 of 639 ports in this commit are shown above. )
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
about for a while.
PR: ports/168208
Approved by: portmgr (miwi)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Thu, 8 Apr 2010
|
[ 12:52 ume ]
Update to 1.4.7.
PR: ports/145459
Submitted by: HASHI Hiroaki <hashiz__at__meridiani.jp>
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Mon, 5 Jan 2009
|
[ 20:36 pav ] (Only the first 10 of 102 ports in this commit are shown above. )
- Remove conditional checks for FreeBSD 5.x and older
|
|
Fri, 6 Jun 2008
|
[ 13:37 edwin ] (Only the first 10 of 73 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Tue, 25 Mar 2008
|
[ 22:44 miwi ] (Only the first 10 of 211 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
|
Mon, 25 Jun 2007
|
[ 08:26 ume ]
Update to 1.2.4.
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Mon, 30 Apr 2007
|
[ 03:55 ume ]
Update to 1.2.3.
|
[ 03:07 ume ]
Chase scim shlib version bump.
|
|
Sat, 31 Mar 2007
|
[ 04:22 ume ]
Fix plist after upgrading scim to 1.4.5.
scim-1.4.5 appended its version to the moduledir in scim.pc.
|
|
Wed, 22 Nov 2006
|
[ 11:57 ume ]
Update to 1.2.2.
|
|
Sat, 14 Oct 2006
|
[ 08:54 marcus ] (Only the first 10 of 893 ports in this commit are shown above. )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
|
|
Sun, 8 Oct 2006
|
[ 14:45 ume ]
doesn't build it on FreeBSD 4.x.
Reported by: pointyhat via kris
|
|
Mon, 2 Oct 2006
|
[ 11:57 ume ]
Update to 1.2.1.
|
|
Wed, 16 Aug 2006
|
[ 18:06 ume ]
Update to 1.2.0.
|
|
Mon, 10 Apr 2006
|
[ 18:02 ume ]
Update to 1.0.0.
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Mon, 30 Jan 2006
|
[ 02:42 ume ]
Update to 0.9.0.
|
|
Tue, 29 Nov 2005
|
[ 07:48 ume ]
Update to 0.8.0.
PR: ports/89713
Submitted by: Jun Mukai <mukai__at__jmuk.org> (with some modification)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Sat, 5 Nov 2005
|
[ 05:22 marcus ] (Only the first 10 of 1045 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared library update.
|
|
Sun, 16 Oct 2005
|
[ 16:13 ume ]
Add dependency for japanese/kasumi. The author highly recommend to
install kasumi with scim-anthy.
PR: ports/87516
Submitted by: NIIMI Satoshi <sa2c@sa2c.net>
|
|
Sat, 15 Oct 2005
|
[ 13:21 nork ] (Only the first 10 of 18 ports in this commit are shown above. )
SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.
Approved by: Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by: Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]
|
[ 11:59 ume ]
Update to 0.7.1.
|
|
Sat, 1 Oct 2005
|
[ 16:53 ume ]
Update to 0.7.0.
|
|
Sun, 28 Aug 2005
|
[ 11:28 ume ]
Update to 0.6.1.
|
|
Sat, 30 Jul 2005
|
[ 08:25 ume ]
update to 0.6.0.
|
[ 06:20 nork ] (Only the first 10 of 14 ports in this commit are shown above. )
o Update to 1.4.0.
o Chase bump libversion to slave ports .
PR: ports/84247
Submitted by: Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)
|
|
Sat, 16 Jul 2005
|
[ 19:40 ume ]
Update to 0.5.2.
|
|
Tue, 31 May 2005
|
[ 19:21 ume ]
fix plist. 0.4.2 added some files.
|
[ 12:35 ume ]
Update to 0.4.2.
|
|
Tue, 10 May 2005
|
[ 14:57 nork ] (Only the first 10 of 16 ports in this commit are shown above. )
o Update
ports/textproc/scim 1.2.0 --> 1.2.2
ports/textproc/skim 1.2.0 --> 1.2.2
o Chase scim's library bump.
PR: ports/80848
Submitted by: Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)
|
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
|
Wed, 2 Mar 2005
|
[ 11:40 ume ]
add new port scim-anthy -- SCIM IMEngine module using the Anthy
input method.
|
Number of commits found: 58 |
As an Amazon Associate I earn from qualifying purchases.