/commits.php is going away

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Chanse update of devel/libffi

Chase the devel/libffi update
Bump portrevision of all dependent ports to chace shard library version bump
in libffi.
Update LIB_DEPENDS lines where needed to not require a specific version of
libffi.so.

PR:		247028 (for tracking)

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

Cleanup plist

Replace USE_AUTOTOOLS=libltdl with an ordinary LIB_DEPENDS in all ports.
There are only 60 such ports so there doesn't need to be a separate
keyword or USES for this.

Approved by:	portmgr (bapt)

Fix build by forcing -lpopt.

Add USES=libtool and INSTALL_TARGET=install-strip

Finish stage support

Use new LIB_DEPENDS format.  Remove unnecessary NO_STAGE.

- Covert gmake, xz to USES

Approved by:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
java)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Convert j* categories to USES=pkgconfig

- Reset maintainership.  See ports/164941.
- Fix conflicts with java/classpath.  Note security provider configuration
is moved to ${PREFIX}/lib/security/SableVM.security.  This file is always
loaded first because the short vendor name is SableVM.  If it does not
exist, then classpath.security is loaded (java/security/Security.java).
- Reduce Makefile headers, add licenses, and convert to optionsNG.

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Fix build with jdk16

PR:             123624
Submitted by:   Andrew Reilly <areilly@bigpond.net.au>
Approved by:    maintainer

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Adapt for new libffi, and various fixes

PR:             ports/122399
Submitted by:   Bjoern Koenig <bkoenig@alpha-tierchen.de> (maintainer)

- Use devel/libffi instead of devel/libffi-devel
- Use SF macro
- Bump PORTREVISION

PR:             120926
Submitted by:   Bjoern Koenig (maintainer)

- Update to 1.13
- Take maintainership
- Split classpath into separate port
- Switch to libffi-devel to allow build on !386

PR:             ports/118288, ports/118312
Submitted by:   Bjoern Koenig <bkoenig@alpha-tierchen.de>

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- switch INSTALLS_SHLIB => USE_LDCONFIG
- Fix build after objformat removal

- Reset MAINTAINER:

<<< 550 relay not permitted
550 5.1.1 <roman@ontographics.com>... User unknown

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Renamed port graphics/libart_lgpl2 -> graphics/libart_lgpl

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by: krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Bump PORTREVISION to chase the glib20 shared lib version change.

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Add build fix for FreeBSD 4.x.

Update to 1.1.6.

New maintainer.

Use USE_LIBLTDL instead of depending on ltdl:${PORTSDIR}/devel/libltdl15.

Noticed by:     krion

Upgrade to version 1.1.5.

Submitted by:   Roman Kennke <roman@ontographics.com>

Sync with new bsd.autotools.mk

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Restrict to i386.

BROKEN on alpha: does not compile

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Remove USE_GNOMENG.

Fix port build failure.

Fix port build failure.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Fix install bug: install resources along with classfiles.

Unbreak port in the non-gnome case.

Update to version 1.0.6.

Fix build on -current by adding "-D__XSI_VISIBLE -D__BSD_VISIBLE" to CFLAGS.

Fix bug in logic for determining the right pkg-plist file to use.

Use ${MASTER_SITE_SOURCEFORGE} instead of hard-coded master site.

Update to version 1.0.5.

Use the right pkg-plist depending on whether GNOME support is configured.

Annihilate #inclusions of <malloc.h>.

Make this port GNOMENG aware.

PR:     ports/42206

Update to version 1.0.4.

Remove this patch, it's not actually needed.

Remove explicit dependency already covered by USE_GNOMELIBS.

Patches to fix compilation on -stable.

Patch to fix the build when doing USE_GNOMELIBS.

Fix test for gnome header file.

Pass CFLAGS to configure scripts using CONFIGURE_ENV.

Update to version 1.0.3.

Make USE_GNOMELIBS optional. Add a patch that fixes a native library bug.

Bump the shared library version of dependency libgmp from 5 -> 6.
Tweak makefile output.

Update to SableVM version 1.0.2.

This port includes the Java classes, making the java/sablepath port obsolete.

SableVM implements the Java virtual machine specification, second edition.

SableVM is a bytecode interpreter. It's goals are to be reasonably small,
efficient, and fast, as well as providing a well-designed platform for
doing research into different algorithms for bytecode interpretation,
garbage collection, memory management, etc.

SableVM uses a modified version of the GNU Classpath Java classes;
these classes are installed by the "sablepath" port.

WWW: http://www.sablevm.org/