mail/claws-mail: Update to 3.20.0/4.2.0
- Resurrect fancy plugin for the GTK 3 version of Claws Mail.
- Clean up dependencies.
- Disable GDK deprecation warnings flooding the build log.
- Enable i18n of the plugins.
- Enable parallel build of plugins.
PR: 275236
Approved by: Chris Hutchinson <portmaster@bsdforge.com> (maintainer)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net>
(Only the first 15 lines of the commit message are shown above )
mail/claws-mail: Update to 3.19.0
- Update to 3.19.0
- Reset PORTREVISION where apropriate (notably in slave ports)
And while here, also portclippy and portfmt a bit.
Approved by: Chris Hutchinson <portmaster@bsdforge.com> (maintainer)
PR: 263059
graphics/poppler: update to 21.12
Release 21.12.0:
core:
* Add API to add images
* CairoOutputDev: Fix de-duping of Flate images
* Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
* Minor code improvements
glib:
* Add API for validation of signatures
* Add API to read/save to file descriptor
utils:
* pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117
build system:
* Increase C++ standard to 17
Exp-run by: antoine
PR: 260344
graphics/poppler: update to 21.08.0
Release 21.08.0:
core:
* Add API to allow addition and modification of outlines into a PDF
* Use additional samples to test for constant parts of an axial
gradient
* forms: Create fallback fonts for some well known font names
* Support reading the PDF Version from the Catalog
* Fix XRef::copy when there are modified objects
* Take into account that Date string may be in unicode
* JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
* Replace a local bubble sort implementation by std::sort
* Fix issues with malformed files
build system:
(Only the first 15 lines of the commit message are shown above )
mail/claws-mail: update to latest 3.18.0
New in this release:
~~~~~~~~~~~~~~~~~~~~
* Support for the OAuth2 authorisation protocol has been added for
IMAP, POP and SMTP using custom, user-generated client IDs.
OAuth2 preferences are found in the Account Preferences on the
Receive page (for POP: Authenticate before POP connection, for
IMAP: Authentication method); the Send page (SMTP authentication:
Authentication method); and on a dedicated OAuth2 page.
* The option 'Save (X-)Face in address book if possible' has been
added to the /Message View/Text Options preferences page.
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 21.07.0
Release 21.07.0:
core:
* JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
* PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
* CairoOutputDev: Fix memory leak on broken files
* Minor code improvements
build system:
* set C standard to 11 without extensions
Exp-run by: antoine
PR: 256981
graphics/poppler: update to 21.06.0
Release 21.06.0:
core:
* Fix rendering of some extended latin1 characters in annotations.
Issue #1070
* Support some not so well formed documents with password. Issue #1083
* Add API to get notified if the xref is reconstructed
* Add somewhat fancier left/right signature visual representation
* Fix crashes in malformed files
* Minor code improvements
qt6:
* Change some functions to return std::unique_ptr
qt5/qt6:
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 21.05.0
Release 21.05.0:
core:
* Fix crashes in malformed files
* Export SplashFont* symbols used by Scribus
* Minor code improvements
qt5/qt6:
* Make sure new signatures are always properly oriented
* Allow to pass the border width when signing
glib:
* Enhance find to support multi-line matching
utils:
* pdftoppm: Fix regression when using single scaleTo. Issue #1062
build system:
* Allow to disable building manual tests
PR: 255562
Exp-run by: antoine
graphics/poppler: update to 21.04.0
Release 21.04.0:
core:
* Hide symbols by default
* TextSelectionDumper: fix word order for RTL text
* Fix rendering of text in some files. Issue #1052
* Implement rendering of Masks of Image subtype. Issue #1058
* Forms: fix unclicking standalone form buttons. Issue #1034
glib:
* Expose more fields from MediaRendition in PopplerMedia
* Use stock glib macro to define boxed type
* Remove incorrecly used volatile from enum type registration code
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 21.03.0
Release 21.03.0:
core:
* Fix parsing text in some broken pdf files. Issue #1040
* Fix memory issue when using threads. Issue #1050
* TextSelectionDumper: Fix getText() for space after word
* Change signature of OutputDev:tilingPatternFill
* Make PDFDocBuilder return a std::unique_ptr
* Improve well formed check for shading functions
* Fix leak in case of fread failing
* Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
* PSOutputDev: Fix stack overflow in broken files
glib:
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 21.02
Release 21.02.0:
core:
* GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
* Fix memory leak if saving the file fails
* Internal code improvements
* Fix various issues handling broken files
* Make checkedAdd work for long long in MSVC
qt5:
* Properly export NewSignatureData class
* Fix regression in QIODeviceOutStream + MSVC
qt6:
* Properly export NewSignatureData class
* Fix regression in QIODeviceOutStream + MSVC
utils:
* pdftohtml: Fix error() parameter type
PR: 253183
Exp-run by: antoine
graphics/poppler: update to 21.01.0
Release 21.01.0:
core:
* Faster routines for jpeg decoding
* Fix reading signatures in encrypted files
* Add white point correction when lcms is used
* JBIG2Stream: Fix byte counting
* Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
* Specifically use DeviceGray instead of DefaultGray for softmasks
* Fix various issues handling broken files
utils:
* pdftocairo: Setmode binary for windows
* pdfsig: Add hability to digitally sign files
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 20.12.0
Changelog:
core:
* Draw better circles for circle annotations
* Fix annotation line width if no appearance stream or style are given
* Tweak rendering of highlight annotations
* Fix border rendering of some annotations
* Fix rendering of some files. Issue #976 Issue #567
* PSOutputDev: provide options to set the rasterization color space and
ICC profile
* PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
* PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
* Use the font name without subset tag when querying for a system font
* Splash: Fix wrong x adjustment during clipping
* Splash: Fix blitImage in uncolored tiling patterns
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 20.11.0
Release 20.11.0:
core:
* More work on rendering of standalone Annot Widgets. Issue #806
* Fix crashes in embedded file handling on broken files. Issue #967
* Fix uninitialized memory read on broken files
* Save a bit of memory in Dict data
cpp:
* Fix crashes in embedded file handling on broken files. Issue #966
utils:
* pdftohtml: HTML and XML output includes font opacity.
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 20.10.0
Release 20.10.0:
core:
* Filter out repeated forms
* Implement EmbedStream::reset()
* CairoOutputDev: evict just font faces owned solely by cache.
* Splash: Rename Yd to Ydown, Xu to Xup, etc.
* Splash: fix crash in out-of-memory situation.
* Fix some undefined behaviour situation with forged files
PR: 250052
Exp-run by: antoine
graphics/poppler: update to 20.09.0
Release 20.09.0:
core:
* Compability fix for Forms
* Fix fetching of Objects failing in some cases
* Fix clearing date in Annot setModified/setDate
* TextSelectionPainter: support glyphless fonts
* Splash: Don't try read past end of image
* avoid abort() on large memory allocation
* Fix memory leak on broken files
* Fix potential invalid memory read
* Small code improvements
qt5:
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.90
Release 0.90.0:
core:
* Color profile tweaks
* Small signature improvements
* BBoxOutputDev: Fix calculation when type3 fonts are involved
* Fix potential crash when reading Forms
* Fix infinite loop in broken file
glib:
* Fix adding annots in rotated pages
* Add ability to reset forms
* Several fixes to the documentation
qt5:
* Make it clear we require Qt 5.5
(Only the first 15 lines of the commit message are shown above )
mail/claws-mail: reorganize plugins
renames a few ports to match their names to the plugin names
(adding to MOVED)
PR: 245939
PR: 239659
Submitted by: rozhuk.im@gmail.com
Approved by: Chris Hutchinson <portmaster@bsdforge.com> (maintainer)
graphics/poppler: update to 0.89.0
Release 0.89.0:
core:
* Add support for ResetForm action. Issue #225
* Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
* Fix exporting to PS of some files with CID fonts
* Use ICC profiles in PS output (if new enough lcms is used)
* Allow almost-singular tiling pattern matrices. Issue #894
* Fix memory leak when failing to load some fonts
* CairoOutputDev: Use stroke opacity when clipping to a stroke path
* CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190
glib:
* Add poppler_movie_get_aspect
cpp:
* Add the font infos to the text_box object
Exp-run by: antoine
PR: 246848
graphics/poppler: update to 0.88.0
Release 0.88.0:
core:
* Support Widget Annotation Buttons not linked to any Form
* SplashOuputDev: Use stroking opacity when clipping to a stroke path
* Handle 1 bit RGB images in ICC colorspace
* Internal code improvements
qt5:
* Add Document::signatures. Returns signatures not attached to any page
* ArthurOutputDev: Fix font hinting
* ArthurOutputDev: Set the opacity when filling with axial gradients
* ArthurOutputDev: Implement the clipToStrokePath method
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.87.0
Release 0.87.0:
core:
* Fix crashes due to inconsistent vtables for Clang builds
* Fix leak in broken files
* Internal code improvements
qt5:
* Add option to get form choice for export value
* ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695
glib:
* Internal code improvements
utils:
* pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest
PR: 245150
Exp-run by: antoine
graphics/poppler: update to 0.84.0
Release 0.84.0:
core:
* Fix crash when converting from Unicode to ASCII-7
* Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
* JBIG2Stream: fix potential crash in malformed documents
* JBIG2Stream: fix leak in reset() if called several times
* Internal code improvements
utils:
* pdfimages: Add error message if first page is larger then number of
pages.
* pdfinfo: Improved paper size recognition
* pdfsig: Fix exit code when dumping signatures
* pdftocairo: Error out when even/odd selects 0 pages
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.82.0
Release 0.82.0:
core:
* Fix not being able to open some files. Issue #832
* Fix crashes in malformed files
* Fix memory leak on broken files
* Minor performance improvements
* Minor code improvements
glib:
* Add poppler_document_new_from_bytes
* PopplerAttachment: Silence deprecation warnings for ctime/mtime
build system:
* pdf-inspector: Support builddir != srcdir
* Install Cairo* headers if Cairo has been found
Thanks to adridg@ for fixing all the fallout.
Exp-run by: antoine
PR: 241532
Approved by: gnome (kwm, implicit)
graphics/poppler: update to 0.80.0
Release 0.80.0:
core:
* Annotations: Implement support for setting a different text in the appearance
stream than the real text
* Splash: Optionally use small_vector from boost
* Fix memory leaks on broken files
* Fix abort on broken files
* Small code simplifications
* Remove USE_FIXEDPOINT support. Issue #821
qt5:
* Fix MSVC build
* Add subsitute-font information
* Fix since marker of some functions
(Only the first 15 lines of the commit message are shown above )
Update to 3.17.4
* New HTML viewer plugin: Litehtml viewer
* Added option 'Enable keyboard shortcuts' to the 'Keyboard
shortcuts' frame on /Configuration/Preferences/Other/Miscellaneous
* Compose: implemented copying of attached images to clipboard
* Compose: images and text/uri-list (files) can now be attached by
pasting into the Compose window
* Python plugin: window sizes are now remembered for the Python
console, the 'Open URLs' and the 'Set mailbox order' windows.
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.79.0
Release 0.79.0:
core:
* Fix regression on TextSelectionPainter
* Fix parsing of DefaultAppearance
* Fix memory leak in PostScriptFunction
* Fix crashes in fuzzed files
qt5:
* Implemented support for setIcon by changing appearance
* Added option to set the form available to print
* QString::null is deprecated, use QString()
* Replace deprecated qStableSort with std::stable_sort
build system:
* Turn README into README.md and expand it
PR: 239277
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
graphics/poppler: update to 0.78.0
Release 0.78.0:
core:
* Fix line annotation arrows for usage in dimensioning
* Handle Ink annots without an InkList but with an AP
* Fix typos preventing parsing of Movie start and duration
* Fix crash on malformed files
glib:
* Add poppler_document_create_dests_tree()
* Don't use the deprecated g_type_class_add_private()
* Document the differences between render() and render_for_printing()
* Fix introspection for poppler_document_new_from_data
* Don't create PopplerInputStream with length 0. Issue #414
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.76.1
From Changelog at https://poppler.freedesktop.org/releases.html :
Release 0.76.1:
core:
* Make the mul tables be calculated at compile time with constexpr.
* splash: Fix compile with SPLASH_CMYK enabled
* Some typo fixing in error messages
qt5:
* Fix regression in annotation handling
build system:
* Fix some typos in build system output and comments
(Only the first 15 lines of the commit message are shown above )
Update to Claws Mail 3.15.1 bugfix release
This is a bug-fix release:
~~~~~~~~~~~~~~~~~~~~~~~~~~
* Bug fixes:
o bug 3348, 'Contact pictures not deleted when contact is
deleted'
o bug 3721, 'Fails to build in Debian kfreebsd-*'
o bug 3744, 'Crash upon deleting tags.'
o bug 3822, 'AttRemover deletes message and fails to create
new one when disk is full'
o bug 3828, '"Re-edit" should not recycle the Message-ID
header'
o bug 3835, 'autogen.sh fails with invalid test on line 33'
o bug 3855, 'segfault at startup with old profile and IMAP
account'
o bug 3866, 'slibtool causes compile failure'
o fix crash in sieve manager window when no account has sieve
enabled.
o fix incorrect labels in folder selection dialog.
o fix RSSyl feeds getting renamed to "Untitled feed".
o fix Resent-Date value.
o Fix typo around libarchive in configure.ac.
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
Update poppler to 0.40.0. [1]
Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.
PR: 206293 [1]
Submitted by: olivierd@ [1]
Obtained from: ubuntu [2], rubygem-poppler upstream [3]
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be
(Only the first 15 lines of the commit message are shown above )
- Update Claws Mail & plugins to version 3.12.0
- Fetch distfile from project site, SF distribution is postponed till
situation with site is clear
- Include configure patch that prevents linking all binaries to libarchive [1]
- Switch archiver plugin to USES=libarchive [1]
- Add new Manage Sieve plugin which allows manipulation of IMAP filters
- Mark gdata plugin as IGNOREd, needs newer version of devel/libgdata
library, which is not in ports yet
Release notes: http://claws-mail.org/news.php
PR: 201949 [1]
Submitted by: tijl [1]
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
Update poppler to 0.30.0 [1].
Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].
PR: 196599 [1]
Submitted by: olivierd@ [1]
Exp-run by: antoine@
Obtained from: upstream [2]
mail/libetpan:
- Update to version 1.5, development moved to github
- Convert to USES=libtool, don't install la file
- Install striped version of library
- Allow to compile with OpenSSL from base
- Update homepage address
- Bump affected deskutils/cairo-dock-plugins
mail/claws-mail:
- Update to version 3.10.0
- Convert to USES=libtool tar:bzip2 [1]
- Don't install static plugin files [1]
- Replace GMAKE with MAKE_CMD [1]
Release notes: http://claws-mail.org/news.php
mail/claws-mail-clamd:
- Don't show pkg-message in post-install, staging takes care of that
Submitted by: tijl via private mail [1]
Update poppler to 0.24.4.
Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.
Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
Update to Claws Mail 3.9.1 release
Changelog: http://claws-mail.org/news.php
claws-mail:
- Now whole release is distributed as one file
- Move common stuff to Makefile.claws
- Cleanup many accumulated, old and not needed things
- Move bogofilter, pgp and spamassassin plugins to separate ports
- Dillo plugin was dropped so drop option for it
plugins:
- All plugins ports are now slaves to main port
- Remove all distinfo and pkg-plist files - this is
now handled by main port
- Deprecate cachesaver and gtkhtml2_viewer plugins - they are not
maintained by upstream anymore
Update to Claws Mail 3.9.0 release
Changelog: http://www.claws-mail.org/news.php
claws-mail:
- Remove leading article from COMMENT
- Add missing deps
- Modernize options descriptions
- Respect NLS option
- Remove shlib ABI versions from LIB_DEPENDS
plugins:
- Bump plugins with no new versions
- Remove stale patches
- Improve COMMENTs, be more verbose what plugin does, use official
Claws Mail name, remove leading articles
- Convert WWW: lines from tabs to spaces
- Readd mail/claws-mail-pdf_viewer, licensing of xpdf and poppler libraries
has changed and now is compliant with GPLv3 which claws-mail uses
- Update to version 0.9.2
- Depend on graphics/poppler-glib
- Correctly use LDFLAGS, CFLAGS
- Convert to OptionsNG
- Add homepage, LICENSE
This plugin is not longer developed/supported by claws-mail team due to
licensing problems. Poppler lib that this plugin uses contains code from
xpdf package which is licensed under GPLv2 only (no "or later" part) and
claws-mail uses GPLv3.
According to FSF GPLv2 only and GPLv3 are incompatible. Also this plugin
doesn't work with new claws-mail anyway.
PR: 136431
Submitted by: "Pawel Pekala" <c0rn@o2.pl> (maintainer)
First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.
x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
