FreshPorts -- mail/exim-sa-exim: High performance MTA for Unix systems on the Internet

Port details on branch 2020Q3

exim-sa-exim High performance MTA for Unix systems on the Internet

4.94+4.2.1_2 mail =0 Package not present on quarterly.This is expected early in the quarter (because the new packaage repo has not been built yet.). Otherwise, this missing version is most likely a FreshPorts error.

Maintainer: fluffy@FreeBSD.org

Port Added: 2020-07-18 09:55:14

Last Update: unknown

License: GPLv2

WWW:

http://www.exim.org/

Description:

Exim is a mail transfer agent for Unix systems connected to the Internet. It is a monolithic MTA designed to be a command line compatible drop-in replacement for Sendmail. Exim is an excellent mailer for an ISP, as its control and flexibility are very good and its requeueing and retry algorithms are very powerful. Exim's configuration syntax is well documented. WWW: http://www.exim.org/

¦ ¦ ¦ ¦

Manual pages:

FreshPorts has no man page information for this port.

pkg-plist: as obtained via: make generate-plist

Expand this list (50 items)

Collapse this list.

/usr/local/share/licenses/exim-sa-exim-4.94+4.2.1_2/catalog.mk
/usr/local/share/licenses/exim-sa-exim-4.94+4.2.1_2/LICENSE
/usr/local/share/licenses/exim-sa-exim-4.94+4.2.1_2/GPLv2
@mode 4755
sbin/exim
@mode
sbin/exim_checkaccess
sbin/exim_dbmbuild
sbin/exim_dumpdb
sbin/exim_fixdb
sbin/exim_lock
sbin/exim_tidydb
sbin/exicyclog
sbin/exigrep
sbin/eximstats
sbin/exinext
sbin/exipick
sbin/exiqgrep
sbin/exiqsumm
sbin/exiwhat
man/man8/exim.8.gz
@comment sbin/eximon
@comment sbin/eximon.bin
share/doc/exim/ACKNOWLEDGMENTS
share/doc/exim/NOTICE
share/doc/exim/README.UPDATING
share/doc/exim/ChangeLog
share/doc/exim/Exim3.upgrade
share/doc/exim/Exim4.upgrade
share/doc/exim/NewStuff
share/doc/exim/OptionLists.txt
share/doc/exim/POST-INSTALL-NOTES
share/doc/exim/POST-INSTALL-NOTES.clamd
share/doc/exim/README
share/doc/exim/README.SIEVE
share/doc/exim/dbm.discuss.txt
share/doc/exim/experimental-spec.txt
share/doc/exim/filter.txt
share/doc/exim/spec.txt
share/examples/exim/convert4r3
share/examples/exim/convert4r4
share/examples/exim/transport-filter.pl
etc/periodic/daily/150.exim-tidydb
etc/periodic/daily/460.exim-mail-rejects
@sample etc/exim/configure.sample
@sample etc/exim/sa-exim.conf.sample
@dir(mailnull,mail,) /var/log/exim
@owner
@group
@mode

Collapse this list.

USE_RC_SUBR (Service Scripts)

no SUBR information found for this port

Dependency lines:

exim-sa-exim>0:mail/exim-sa-exim

Conflicts:

CONFLICTS:

exim-4.*
exim-ldap2-4.*
exim-mysql-4.*
exim-postgresql-4.*
exim-sqlite-4.*

To install the port:

cd /usr/ports/mail/exim-sa-exim/ && make install clean

To add the package, run one of these commands:

pkg install mail/exim-sa-exim
pkg install exim-sa-exim

NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.

PKGNAME: exim-sa-exim

Flavors: there is no flavor information for this port.

distinfo:

TIMESTAMP = 1591032067 SHA256 (exim/exim-4.94.tar.bz2) = 73feeaa5ddb43363782db0c307b593aacb49542dd7e4b795a2880779595affe5 SIZE (exim/exim-4.94.tar.bz2) = 1997217

Expand this list (2 items)

Collapse this list.

SHA256 (exim/sa-exim-4.2.1.tar.gz) = 24d4bf7b0fdddaea11f132981cebb6a86a4ab20ef54111a8ebd481b421c6e2c1 SIZE (exim/sa-exim-4.2.1.tar.gz) = 68933

Collapse this list.

No package information for this port in our database: Sometimes this happens. Not all ports have packages. Perhaps there is a build error. Check the fallout link:

Master port: mail/exim

Dependencies

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

perl5>=5.30.r1<5.31 : lang/perl5.30

Runtime dependencies:

spamc : mail/spamassassin
perl5>=5.30.r1<5.31 : lang/perl5.30

Library dependencies:

libidn.so : dns/libidn
libspf2.so : mail/libspf2
libpcre.so : devel/pcre

There are no ports dependent upon this port

Configuration Options:

===> The following configuration options are available for exim-sa-exim-4.94+4.2.1_2: ALT_CONFIG_PREFIX=off: Restrict the set of configuration files CONTENT_SCAN=on: Enable exiscan email content scanner DAEMON=on: Install scripts to run as a daemon DANE=off: Enable experimental DANE support DEBUG=off: Build with debugging support DISABLE_D_OPT=on: Disable macros overrides using option -D DKIM=on: Enable support for DKIM DNSSEC=on: Enable DNSSEC validation DOCS=on: Build and/or install documentation EMBEDDED_PERL=on: Enable embedded Perl interpreter EVENT=on: Messages events support (TPDA namely) EXIMON=off: Build eximon monitor (requires X libraries) ICONV=on: Enable header charset conversion INTERNATIONAL=on: Enable support for the transmission of UTF-8 envelope addresses IPV6=on: IPv6 protocol support LISTMATCH_RHS=off: Enable pre-4.77 behaviour for match_* LMTP=on: RFC2033 SMTP over command pipe transport OCSP=on: Enable OCSP stapling PRDR=on: Enable Per-Recipient-Data-Response support PROXY=off: Enable Experimental Proxy Protocol READLINE=off: Enable readline(3) library SOCKS=off: Enable smtp transport via socks5 proxies SPF=on: Enable Sender Policy Framework checking SUID=on: Install the exim binary suid root TCP_WRAPPERS=off: Enable /etc/hosts.allow access control WISHLIST=off: Include the unsupported patches ====> SMTP Authorization AUTH_CRAM_MD5=on: Enable CRAM-MD5 authentication mechanisms AUTH_DOVECOT=on: Enable Dovecot authentication mechanisms AUTH_PLAINTEXT=on: Enable plaintext authentication AUTH_RADIUS=off: Enable radius (RFC 2865) authentication AUTH_SASL=off: Enable use of Cyrus SASL auth library AUTH_SPA=on: Enable Secure Password Authentication SASLAUTHD=off: Enable use of Cyrus SASL auth daemon PAM=on: Enable PAM authentication mechanisms PASSWD=on: Enable /etc/passwd lookups ====> Lookup support CDB=on: Enable CDB-style lookups BDB=off: Enable Berkeley DB lookups DNSDB=on: Enable DNS-style lookups DSEARCH=on: Enable directory-list lookups LSEARCH=on: Enable wildcarded-file lookups MYSQL=off: Enable mysql lookups NIS=off: Enable NIS-style lookups OPENLDAP=off: Enable LDAP lookups PGSQL=off: Enable postgresql lookups REDIS=off: Enable redis lookups SQLITE=off: Enable SQLite lookups ====> Supported storage formats MAILDIR=on: Enable Maildir mailbox format MAILSTORE=on: Enable Mailstore mailbox format MBX=on: Enable MBX mailbox format ====> Experimental options CERTNAMES=off: Check certiticates ownership DCC=off: Enable DCC at ACL support via dccifd DMARC=off: Enable DMARC support DSN=off: Enable Delivery Status Notifications ARC=off: Enable experimental ARC support LMDB=off: Enable LMDB lookups QUEUEFILE=off: Enable queuefile transport ====> TLS support: you can only select none or one of them TLS=on: TLS support GNUTLS=off: Use GnuTLS instead of OpenSSL for TLS ====> Sender Rewriting Scheme: you can only select none or one of them SRS=off: Enable Sender Rewriting Scheme ===> Use 'make config' to modify these settings

Options name:

mail_exim-sa-exim

USES:

compiler cpe tar:bzip2 perl5 iconv:lib,build ssl

FreshPorts was unable to extract/find any pkg message

Master Sites:

There is no master site for this port.

Number of commits found: 0