libESMTP is an SMTP client which manages submission of electronic mail via a
preconfigured Mail Transport Agent (MTA) such as Exim or Postfix.
libESMTP relieves the developer of the need to handle the complexity of
negotiating the SMTP protocol by providing a simple API. Additionally libESMTP
transparently handles many SMTP extensions including authentication.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.
CR: D306
Approved by: portmgr (bapt)
The vast majority of pkg-descr files had the following format when they
had both lines:
Author: ...
WWW: ....
So standardize on that, and move them to the end of the file when necessary.
Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.
s/AUTHOR/Author/
A few other various formatting issues
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.
PR: ports/153292
Submitted by: myself (pgollucci)
Tested by: -exp run by pav
Approved by: portmgr (pav)
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
With portmgr hat on, reset maintainership of these ports. Maintainer's
old email address bounces, and he has not been responsive to email on the
only other one we have for him.
These ports are now available for adoption.
Come back coop, we miss ya ...
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Update to 1.0.2.
* patch applied to smtp-tls.c and examples/mail-file.c for Balsa
* smtp-tls.c
- fixed typo in check_file()
- domain name check is now done using the wildcard match per RFC 2818
- better error reporting for check_file() and check_directory()
PR: 61434
Submitted by: maintainer
- Update to 1.0.1 (a minor bug fix) [1]
While I'm here [2]
- Install additional documentation
- Always install examples (useful even when NOPORTDOCS defined)
- Define CONFIGURE_TARGET to silence configure warning
- Use EXAMPLESDIR macro in pkg-plist
PR: 58796 [1]
Submitted by: maintainer [1], sergei [2]
fix build on 5-CURRENT after RFC3542 change (EAI_ADDRFAMILY and
EAI_NODATA were obsoleted).
There is some issue; we have EAI_NODATA as an alias of EAI_NONAME
for workaround. However, some of these ports use it as a case
label of switch. Since our alias broke such code, we may better
to consider deleting such alias.
Requested by: kris
Approved by: portmgr (kris) (implicitly)
Remove libtool-based "nit" in build.log to silence complaints about
discovering libtool files after building/installing. Correct a punctuation
error in a comment.
- Don't infect user's system with totally useless .la files; - remove
USE_LIBTOOL (which is nop in this case) and associated patches that "make"
it work; - add missed USE_OPENSSL.