21:44 Joseph Mingrone (jrm) 

*/*: Chase editors/emacs update

Sponsored by:	The FreeBSD Foundation

    12940d8

21:31 Joseph Mingrone (jrm) 

Chase major version update of editors/emacs-devel

Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.

Sponsored by:	The FreeBSD Foundation

    b946d41

22:10 Joseph Mingrone (jrm) 

Chase editors/emacs update to 29.4

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish, yasu
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D45705

    3213a3f

22:51 Joseph Mingrone (jrm) 

Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D44492

    26421ac3

09:21 Tijl Coosemans (tijl) 

devel/autoconf: Update to 2.72

PR:		277046
Exp-run by:	antoine

    b346b48

22:33 Joseph Mingrone (jrm) 

*/*: Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths

- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D43615

    ab463bd

00:53 Yasuhiro Kimura (yasu) 

editors/emacs: Update to 29.1

* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
  TREESITTER are ON by default. PGTK and WEBP options are excluded
  from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
  result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
  result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
  via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
  and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
  libraries.
* When PGTK option is ON and SCROLLBARS is OFF, configure fails as
  following

  ----------------------------------------------------------------------
  checking for gnutls >= 2.12.2... yes
  checking for jansson >= 2.7... yes
  checking for tree-sitter >= 0.20.2... yes
  checking for libkqueue... no
  checking for library containing kqueue... none required
  configure: error: Non-toolkit scroll bars are not implemented for your system
  ----------------------------------------------------------------------

  So add SCROLLBARS to PGTK_IMPLIES to avoid such options setting.
* When MODULES option is OFF and TREESITTER is ON, link error happens
  as following.

  ----------------------------------------------------------------------
  cc -o temacs.tmp \
    -Demacs  -I. -I. -I../lib -I../lib   -I/usr/local/include  
-I/usr/local/include/librsvg-2.0 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include
-I/usr/local/include/gdk-pixbuf-2.0 -pthread -I/usr/local/include/cairo
-I/usr/local/include/pixman-1 -I/usr/local/include/freetype2
-I/usr/local/include/libpng16 -D_THREAD_SAFE   -I/usr/local/include/libpng16 
-I/usr/local/include/libxml2   -I/usr/local/include/dbus-1.0
-I/usr/local/lib/dbus-1.0/include  -I/usr/local/include -D_THREAD_SAFE 
-I/usr/local/include -D_THREAD_SAFE  -I/usr/local/include -D_THREAD_SAFE  
-I/usr/local/include -D_THREAD_SAFE  -I/usr/local/include
-I/usr/local/include/webp   -I/usr/local/include  -I/usr/local/include
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -pthread 
-I/usr/local/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include  -I/usr/local/include/freetype2
-I/usr/local/include/libpng16 -I/usr/local/include  -I/usr/local/include
-I/usr/local/include/freetype2 -I/usr/local/include/libpng16 
-I/usr/local/include/harfbuzz -I/usr/local/include/freetype2
-I/usr/local/include/libpng16 -I/usr/local/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include    -MMD -MF deps/.d -MP  -I/usr/local/include 
 -I/usr/local/include  -I/usr/local/include -I/usr/local/include/p11-kit-1  
-I/usr/local/include/cairo -I/usr/local/include -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/pixman-1
-I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -D_THREAD_SAFE     
-Wno-switch -Wno-pointer-sign -Wno-string-plus-int -Wno-unknown-attributes
-Wno-unknown-pragmas -Wno-initializer-overrides -Wno-tautological-compare
-Wno-tautological-constant-out-of-range-compare -O2 -pipe 
-fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing  -O2
-pipe -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing 
-isystem /usr/local/include    -fstack-protector-strong -L/usr/local/lib 
-L/usr/local/lib \
      dispnew.o frame.o scroll.o xdisp.o menu.o xmenu.o window.o charset.o
coding.o category.o ccl.o character.o chartab.o bidi.o cm.o term.o terminal.o
xfaces.o xterm.o xfns.o xselect.o xrdb.o xsmfns.o xsettings.o  dbusbind.o
emacs.o keyboard.o macros.o keymap.o sysdep.o bignum.o buffer.o filelock.o
insdel.o marker.o minibuf.o fileio.o dired.o cmds.o casetab.o casefiddle.o
indent.o search.o regex-emacs.o undo.o alloc.o pdumper.o data.o doc.o editfns.o
callint.o eval.o floatfns.o fns.o sort.o font.o print.o lread.o  syntax.o 
bytecode.o comp.o  process.o gnutls.o callproc.o region-cache.o sound.o
timefns.o atimer.o doprnt.o intervals.o textprop.o composite.o xml.o lcms.o
kqueue.o  profiler.o decompress.o thread.o systhread.o sqlite.o  treesit.o
itree.o      xfont.o ftfont.o ftcrfont.o hbfont.o  fontset.o fringe.o image.o
xgselect.o json.o     terminfo.o lastfile.o      ../lib/libgnu.a     
../oldXMenu/libXMenu11.a  -ltiff -ljpeg -L/usr/local/lib -lpng16  -lgif 
-L/usr/local/lib -lwebpdemux -lwebpdecoder   -lSM -lICE -lX11   -lXrender 
-L/usr/local/lib -lrsvg-2 -lm -lgio-2.0 -lgdk_pixbuf-2.0 -lgobject-2.0
-lglib-2.0 -lintl -lcairo        -lrt -L/usr/local/lib -ldbus-1  -lexecinfo
-L/usr/local/lib -lXrandr  -L/usr/local/lib -lXinerama  -L/usr/local/lib
-lXfixes  -lXext -lXext -L/usr/local/lib -lxml2   -lutil -L/usr/local/lib
-lcairo  -lncurses  -L/usr/local/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lintl 
-L/usr/local/lib -lgobject-2.0 -lglib-2.0 -lintl   -L/usr/local/lib -lfreetype 
-L/usr/local/lib -lfontconfig -lfreetype  -L/usr/local/lib -lharfbuzz   
-L/usr/local/lib -lgnutls  -lpthread  -L/usr/local/lib -llcms2
-llcms2_fast_float -llcms2_threaded   -lm -lz   -L/usr/local/lib -ljansson 
-lgmp  -L/usr/local/lib -lXi   -L/usr/local/lib -ltree-sitter  -lsqlite3
-lXcomposite -lXext
  ld: error: undefined symbol: dynlib_error
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  >>> referenced 1 more times

  ld: error: undefined symbol: dynlib_sym
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)

  ld: error: undefined symbol: dynlib_open
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  cc: error: linker command failed with exit code 1 (use -v to see invocation)
  ----------------------------------------------------------------------

  So add MODULES to TREESITTER_IMPLIES to avoid such options setting.
  * Bump PORTREVISION of ports that use "USES=emacs".

ChangeLog:	https://git.savannah.gnu.org/cgit/emacs.git/tree/etc/NEWS?h=emacs-29.1
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D41444

    ba4eb3a

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

21:05 Hiroki Sato (hrs) 

mail/mu4e: Update to 1.8.13

    4e4d098

07:06 Yasuhiro Kimura (yasu) 

editors/emacs-devel: Update to 2022-11-28 snapshot

Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.

Changes:	https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f

    ea66012

07:48 Yasuhiro Kimura (yasu) 

editors/emacs: Update to 28.2

* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
  since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.

ChangeLog:	https://www.gnu.org/software/emacs/news/NEWS.28.2

PR:		266454
Exp-run by:	antoine
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D36613

    164249e

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

13:14 Hiroki Sato (hrs) 

mail/mu{,4e}: update to 1.6.10

    f0e6586

22:12 Joseph Mingrone (jrm) 

Emacs ports: Bump PORTREVISION after Emacs 28.1

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34781

    d9dcd9c

15:19 Joseph Mingrone (jrm) 

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

    061afcc

22:55 Joseph Mingrone (jrm) 

*: Chase new major version (29) of editors/emacs-devel

Differential Revision:	https://reviews.freebsd.org/D32258

    126e3bb

19:01 Hiroki Sato (hrs) 

mail/mu4e: update to 1.6.4

PR:	249244, 250588, 257834

    97f8949

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

00:40 jrm 

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

 

02:42 jrm 

mail/mu4e: Fix build after latest editors/emacs-devel update

The 'when' argument of `make-obsolete' and related functions was recently
made mandatory. [1] Update to pull in an upstream fix to
`define-obsolete-function-alias'. [2]

[1]
https://github.com/emacs-mirror/emacs/commit/32c6732d16385f242b1109517f25e9aefd6caa5c
[2] https://github.com/djcb/mu/commit/c311dc4d36ae99db6b6cb62d1ea3abfea90012aa

Reported by:	tcberner
Approved by:	portmgr (blanket, build fix)

 

18:30 jrm 

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

 

04:55 jrm 

editors/emacs-devel: Update to latest master branch commit, 4f2b415

This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.

Submitted by:	ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23012

 

22:00 hrs 

Update to 1.2.

 

07:31 hrs 

Add a workaround for poudriere build error during byte-compilation.

 

18:12 bapt 

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

 

01:18 jrm 

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

 

06:10 hrs 

Update to 1.0.

PR:	226158

 

05:57 hrs 

Update to 0.9.18.

PR:	225852

 

18:03 jrm 

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

 

15:38 ashish 

Chase Emacs update

 

23:26 marino 

mail/mu4e is not jobs safe

This port has failed in a multijob environment a couple of times already.
This latest time, the race failure was:

mu4e-proc.el:26:1:Error: Opening pty: No such file or directory
gmake[2]: *** [Makefile:583: mu4e-proc.elc] Error 1

 

19:02 hrs 

- Fix a lmissing dependency of mail/mu.
- Add "emacsNN" suffix to the Emacs backend.

 

19:42 amdmi3 

Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)
- Remove CMAKE_VERBOSE, NINJA_VERBOSE and
  CONFIGURE_ARGS=--disable-silent-rules from all ports which set them
  for this is no longer needed
- Revert hacks for --disable-silent-rules support priorly committed
  to biology/ncbi-blast+ and net-p2p/mldonkey - no longer needed as well

Submitted by:	amdmi3
Reviewed by:	mat
Exp-run by:	antoine
Approved by:	portmgr (mat, antoine)
Differential Revision:	D7534

 

18:08 hrs 

- Split mail/mu into mail/mu4e.
- mail/mu4e now installs gzip'd elisp files.
- Add mail/mu4e-maildirs, Maildirs extension for Mu4e.
- Take maintainership of the related ports.

Discussed with:	William Waites (maintainer)