14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

16:21 adamw 

Remove metamail dependency, and add a mailcap.5 manpage.

The intention of r411160 was to provide a mailcap manpage, as referenced
in multiple places by the mutt(1) and muttrc(5) manpages.

Although mail/metamail provides a mailcap.4 manpage, metamail is not
particularly relevant as a mailcap provider. The main external filter
that mutt needs is something to render text/html mime parts, but the
last metamail release was in 1994, 22 years ago.

This commit removes that metamail dependency, and adds a mailcap.5
manpage written by Udo Schweigert (mail/mutt's maintainer), based off
metamail's mailcap.4 manpage.

PR:		207727
Submitted by:	Udo Schweigert (maintainer)

 

23:04 mat 

Depend on a file that actually is in the package, so that the dependency
is really registered.

Sponsored by:	Absolight

 

12:56 feld 

mail/mutt: Add missing RUN_DEPENDS

Mutt requires mailcap to handle MIME attachments.

http://www.mutt.org/doc/manual/manual-5.html

PR:		207727
Approved by:	maintainer

 

12:33 marino 

mail/mutt-lite: document ncurses requirement (USES+=ncurses)

approved by:	infrastructure blanket

 

12:11 pi 

mail/mutt: set GSSAPI default to NONE

- this was the old default

PR:		206220

 

11:50 pi 

mail/mutt: provide options to build with GSSAPI variants

The port rolls its own GSSAPI handling system, looking for installed
libraries, rather than employing the "Uses" knobs (which probably
post-date the mutt Port's GSSAPI support).

When linking against OpenSSL from Ports, this results in one mutt
process pulling in both libcrypto.so.8 from Ports and libcrypto.so.7
from the base system (FreeBSD 10.1), leading to environ corruption
problems when running external commands, which complain at startup
(libc routines detect the corruption).  These look like:

    sh: environment corrupt; missing value for SOME_VAR

and can be seen when, eg, viewing a PGP-signed mail with GnuPG
integration turned on.

This patch switches mail/mutt to use the GSSAPI "Uses" system.

PR:		206220
Submitted by:	Phil Pennock <freebsd@phil.spodhuis.org>
Approved by:	Udo Schweigert <Udo.Schweigert@siemens.com> (maintainer)

 

08:41 pi 

mail/mutt: update sidebar patch

PR:		205284
Reported by:	Zsolt Udvari <udvzsolt@gmail.com>
Approved by:	Udo Schweigert <Udo.Schweigert@siemens.com> (maintainer)

 

04:49 ohauer 

-  fix mutt-lite NLS leftovers [1]

[1] patch by ak@

PR:		206092

 

10:05 ohauer 

- fix mutt-lite build

PR:		206092 (follow up)
Approved by:	udo.schweigert@siemens.com (maintainer)

 

16:07 ak 

- Convert to options helpers when possible
- Add URLVIEW option (on by default)
- Add patch to make parent directory entry (..) always on top of browser menu
(with any $sort_browser value)
- Clean up MASTER_SITES

PR:	206092
Approved by:	udo.schweigert@siemens.com (maintainer)

 

09:18 riggs 

Update to upstream version 1.5.24, add MIXMASTER OPTION

PR:		203056, 202114
Submitted by:	Udo.Schweigert@siemens.com (maintainer)

 

01:19 jbeich 

mail/mutt: update patches

- Fix sidebar patch [1]. This version introduces a new config variable
  "sidebar_shortpath" which is set to yes by default to ensure
  backwards compatibility.

- Fix an issue with recent gpg (and gpgme) versions (GnuPG version 2.1
  stops exporting the GPG_AGENT_INFO environment variable, so mutt can't
  check for the presence of that to ensure the agent is running).

- Fix pgp key selection [2].

- Bump port revision because of major change to sidebar patch and gpg
  handling.

PR:		199727
PR:		199115 [1]
PR:		199341 [2]
Submitted by:	Udo.Schweigert@siemens.com (maintainer)
MFH:		2015Q2

 

23:41 amdmi3 

- Add CPE info

Approved by:	portmgr blanket

 

15:56 thomas 

Previous change introduces a new dependency, so bump PORTREVISION

PR:             197699
Differential Revision:  D2218
Approved by:    portmgr (mat)

 

15:35 thomas 

Add "translit" ARG to USES=iconv so that the full port still
uses GNU iconv (not the system iconv): users may rely on
being able to set charset=//TRANSLIT

PR:		197699
Differential Revision:	D2218
Approved by:	maintainer (Udo.Schweigert@siemens.com), portmgr (mat), roberto

 

09:58 rodrigo 

Update for mail/mutt: Fix security vulnerability CVE-2014-9116

PR:		ports/195550
Submitted by:	Udo.Schweigert@siemens.com (maintainer)
Obtained from:	mutt
MFH:		2014Q4

 

13:53 pi 

mail/mutt: improve sidebar function when handling many mail folders

- Add code to improve sidebar function when handling many mail folders
- Remove sidebar patch from default options to fix issues with packages
  (may be reverted later if confidence in current sidebar patch has grown)
- Bump PORTREVISION due to default options changes

PR:		195076
Submitted by:	Udo.Schweigert@siemens.com (maintainer)

 

18:18 tijl 

dns/libidn:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Always install libidn-components.png because it is used by libidn.info
- Add -lintl to Libs.private instead of Libs in libidn.pc

 

22:50 mandree 

Berkeley DB cleanup, remove versions 4.0 ... 4.7.
- Mk/bsd.database.mk rewrite, new default to db5.
- db6 is eligible by default only if installed on the system.
- Bump PORTREVISION of all ports that directly depend on BerkeleyDB or
  where USE_BDB is found in the port's directory
- Patch a few ports such that they will pick up or work with newer
  versions.
- Add UPDATING entry
- Drive-by format fix for pks
- Drop BerkeleyDB option from mail/popular for now, requires more work.
- Exp-run logs linked from the PR below.
- Ports that do not build (IGNORE, BROKEN, etc.) have pro-forma changes
  for new Berkeley DB, but are untested.

NOTE: please read UPDATING and the Wiki page before proceeding!

Announcement:	http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000090.html
Wiki reference:	https://wiki.freebsd.org/Ports/BerkeleyDBCleanup
PR:		192690
Approved by:	portmgr (implicit, PORTREVISION bump on unstaged ports)

 

16:14 adamw 

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

 

03:19 milki 

Revert mail/mutt sidebar patch

- sidebar patch is buggy
- Bump mail/mutt to 1.5.23_3

PR:		190577
Submitted by:	Udo Schweigert <udo.schweigert@siemens.com> (maintainer)
Reviewed by:	Larry Rosenman <ler@lerctr.org> (PR submitter)
Approved by:	swills (mentor)

 

22:37 milki 

Update mail/mutt to 1.5.23_2

- Update sidebar patch to most recent upstream version
  (patch-1.5.23.sidebar.20140412)
- Ammend default options by IDN, LOCALES_FIX, SIDEBAR_PATCH, SASL,
  and TRASH_PATCH as requested by the community
- Bump portrevision to reflect new default options

PR:		ports/188544
Submitted by:	Udo Schweigert <udo.schweigert@siemens.com>
Reviewed by:	bdrewery
Approved by:	eadler (mentor)

 

13:55 zi 

- Resolve build when COMPRESSED_FOLDERS is enabled
- Bump PORTREVISION

PR:		ports/187629
Submitted by:	Simeon Simeonov <blackmore@pichove.org>
Approved by: 	"Schweigert, Udo" <Udo.Schweigert@siemens.com> (maintainer)

 

14:48 zi 

- Fix build with clang

PR:		ports/187418
Submitted by:	"Schweigert, Udo" <Udo.Schweigert@siemens.com> (maintainer)

 

11:30 zi 

- Update to 1.5.23

PR:		ports/187539
Submitted by:	Udo Schweigert <udo.schweigert@siemens.com> (maintainer)
Security:	eb426e82-ab68-11e3-9d09-000c2980a9f3

 

09:05 thierry 

Fix when SLANG is selected.

Reported by:	Albert Shih

 

22:39 thierry 

- Enable staging, simplifying the port, especially the PLIST code

- Make port work with installed db6 for header caches

PR:		ports/185081
Submitted by:	Udo Schweigert <udo.schweigert (at) siemens.com> (maintainer)

 

14:40 bapt 

Switch ispell to aspell-ispell

 

13:01 bsam 

- Fix build for recent FreeBSD 10.0
- Add SMTP as default option (as requested by community)

PR:		ports/183748
Submitted by:	Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

 

10:53 ak 

- Update to 1.5.22 [1]
- Convert to new LIB_DEPENDS syntax

PR:	ports/183125 [1]
Submitted by:		Udo Schweigert <udo.schweigert@siemens.com> (maintainer) [1]

 

19:20 jhale 

- Update security/gpgme to 1.4.3
- Use USE_GNOME= ltverhack to correct the library version number
  to what the author intended.  This effectively rolls the version
  number backwards, but should prevent future unneccesary version
  bumps.
- Support staging
- Use options helpers
- Use new LIB_DEPENDS syntax
- Bump PORTREVISION on dependent ports

 

19:59 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

 

20:01 bsam 

Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).

Co-authors:	bapt, madpilot and bsam (me)

 

15:14 amdmi3 

- Add SMARTDATE patch.
- Fix MAILDIR_HEADER_CACHE if IMAP_HEADER_CACHE is not set
- Add options to disable TLS versions 1.1 and 1.2 if OPENSSL >= 1.0.0 is used
(taken from upstream)
- Fix broken link in package description
- Bumped PORTREVISION

PR:		181431, 181319
Submitted by:	Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

 

14:43 miwi 

- Unbreak build after autotools update

 

15:34 bapt 

Convert USE_NCURSES by USES=ncurses
Convert USE_READLINE by USES=readline

 

11:59 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

17:33 jgh 

- fix NOPORTDOCS
- add GSSAPI option
- while here adopt uses for GETTEXT

PR:		177903
Submitted by:	koukopoulos@gmail.com, Udo.Schweigert@siemens.com
Approved by:	maintainer, Udo.Schweigert@siemens.com

 

22:04 jgh 

- add DESC bit for TOKYOCABINET

Reported by: gjb@
Approved by:	maintainer, implicit

 

06:52 jgh 

- rename CYRUS_SASL2 option to SASL [1,2]
- add tokyocabinet option [2]

PR:		176970 [1]
Submitted by:	john.marshall@riverwillow.com.au [1], maintainer (private mail)
[2]
Approved by:	maintainer, udo.schweigert@siemens.com

 

23:17 jgh 

- fix CYRUS_SASL2 breakage

PR:		176970 (based on)
Submitted by:	john.marshall@riverwillow.com.au
Approved by:	maintainer, udo.schweigert@siemens.com (implicit)

 

07:34 jgh 

- adopt optionsNG and remove legacy information from pkg-descr

PR:		175149
Submitted by:	jgh@/maintainer
Approved by:	maintainer, Udo.Schweigert@siemens.com

 

05:06 jgh 

- conditionally print pkg-message

PR:		175089
Submitted by:	wicked@baot.se
Approved by:	maintainer, udo.schweigert@siemens.com
Patched by:	jgh@

 

15:10 ume 

Update cyrus-sasl2 to 2.1.26.
This bumps shlib version of libsasl2.

 

09:15 crees 

Move mail/mutt to mail/mutt14

Move mail/mutt-lite to mail/mutt14-lite

Move mail/mutt-devel to mail/mutt

Moving mail/mutt-devel-lite to mail/mutt-lite will follow next to avoid
breaking the cvs exporter

PR:		ports/169546
Suggested by:	obrien
Approved by:	maintainer

16:13 jase 

- Remove ftp.parodius.com from MASTER_SITES due to its forthcoming
  closure. We thank Parodius for the hosting services they provided.

PR:             ports/169570
Submitted by:   Jeremy Chadwick <jdc@koitsu.org>
Approved by:    culot (mentor)

16:45 sunpoet 

- Mark CONFLICTS with ja-mutt, ja-mutt-devel, mutt-devel, mutt-devel-lite,
mutt-lite and zh-mutt-devel
- Use ?= for CONFLICTS and PORTREVISION: mutt is MASTERDIR of mutt-lite
- Bump PORTREVISION for package change

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

17:57 dhn 

- Fix handling of ncurses config-option
- Remove USE_GMAKE (not needed)

PR:             ports/160521
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

08:34 bapt 

Add a new macro to deal with conflict between ncurses from base and ncurses from
ports.
If a ports is linked against ncurses from base or from the ports, it should then
add:
USE_NCURSES=yes

it is also possible to specify the hard dependency on the ports ncurses or one
the base one adding the following macros:
WITH_NCURSES_PORT=yes or WITH_NCURSES_BASE=yes

PR:             ports/155269
Submitted by:   me
Reviwed by:     pav@
Approved by:    portmgr (pav@)
Exp-run by:     portmgr (pav@)

07:34 ade 

Sync to new bsd.autotools.mk

11:52 ade 

Punt autoconf267->autoconf268

19:57 ade 

Round one migration of ports from automake{19,110} to automake111

18:35 ade 

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

21:21 johans 

Fix quoting of Makefile variables;
this fixes the installation of mutt-lite

10:29 rene 

- add options for user-settable knobs [1]
- replace an .error with an IGNORE [1]
- s/WITH_NCURSES_PORT/WITH_NCURSES [1]
- pet portlint for fatal errors and capitalization of IGNORE lines
- invert SGML logic for Alpha architecture

PR:             ports/149061 [1]
Submitted by:   David DEMELIER [demelier.david gmail.com]
Reviewed by:    Chip Camden [sterling camdensoftware.com] (during last bugathon)
Approved by:    maintainer timeout (21 days)

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

09:23 pav 

- Switch slang dependency to libslang2 (untested)

Reported by:    pointyhat (make index)
Pointy hat to:  pgollucci

21:05 pav 

- Remove conditional checks for FreeBSD 5.x and older

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

00:57 ade 

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

13:43 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

09:31 miwi 

- Fix dependency for the security/krb5 port.
- Bump PORTREVISION

PR:             117823
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

04:47 linimon 

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

06:40 miwi 

- Update to 1.4.2.3

PR:             113079
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

22:12 miwi 

- Remove SASL1 support

PR:             112076
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

18:35 fjoe 

One more temporary workaround for -CURRENT.

08:38 miwi 

- Fix GSSAPI for FreeBSD 4.x.

PR:             ports/105141
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)
Sponsored by:   FreeBSD Bug-a-thon #2

14:11 shaun 

- Add Kerberos (GSSAPI) support to mutt and mutt-devel.

PR:             ports/103924
Submitted by:   shaun (me)
Approved by:    Udo Schweigert <Udo.Schweigert@siemens.com> (maintainer)

14:44 erwin 

Update to 1.4.2.2

PR:             100478
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)

14:38 shaun 

Fix IMAP buffer overflow:
  http://www.securityfocus.com/bid/18642

PR:             ports/99614 [1], ports/99610 [2]
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer) [1],
                J.P. Dinger <jpd@vvtp.tudelft.nl> [2]
Approved by:    ahze (mentor)

22:37 edwin 

Remove USE_REINPLACE from ports starting with M

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

16:28 pav 

- Add mutt-lite, a slave port for mutt which defines MUTT_LITE flag

PR:             ports/81248
Submitted by:   Jose M Rodriguez <josemi@freebsd.jazztel.es>
Approved by:    Udo Schweigert <Udo.Schweigert@siemens.com> (maintainer)

15:16 vs 

Do not disable NLS by default with MUTT_LITE

PR:             ports/81205
Submitted by:   maintainer

12:42 krion 

Add WITHOUT_MUTT_FLOCK knob.

PR:             ports/81174
Submitted by:   maintainer

18:52 jylefort 

Use autoconf259/automake19 instead of the deprecated
autoconf213/automake14.

PR:             ports/80855
Submitted by:   maintainer

15:37 oliver 

- Fix the misc/mime-support dependency
- Add the MUTT_LITE knob for those who want to build mutt with
  minimal effort.

PR:             ports/80785
Submitted by:   maintainer

08:39 oliver 

last commit was done by using:
PR:             ports/80748
Submitted by:   maintainer

08:37 oliver 

- Use mime.types from misc/mime-support
- Bump PORTREVISION

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

09:03 krion 

Fix the pgp6 examples and no longer install pgp5 examples.

PR:             ports/79076
Submitted by:   maintainer

18:41 krion 

No longer install flea and muttbug as mutt's bug-tracking system is
out of order due to massive spamming.

PR:             ports/75959
Submitted by:   maintainer

12:40 krion 

Install Muttrc and mime.types if not already present from a
prior installation

PR:             ports/68815
Submitted by:   maintainer

07:02 krion 

- Remove obsolete site from PATCH_SITES

PR:             ports/67620
Submitted by:   maintainer

17:29 ade 

Sync with new bsd.autotools.mk

11:37 krion 

- Fix mutt's tmp-file-naming to fix syntax highlightning for
  the vim editor.
- Add the WITHOUT_MUTT_ICONV knob and add dependency on iconv
  if that knob is not defined.

PR:             ports/66443
Submitted by:   maintainer

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

07:21 krion 

- Update to version 1.4.2.1

PR:             ports/62865
Submitted by:   maintainer

09:22 krion 

- Update the compressed mailbox patch
- Add another mirror site for some patches

PR:             ports/62723
Submitted by:   maintainer

17:19 osa 

Maintainer update of mail/mutt:
- Update mutt to version 1.4.2.
  This version fixes a buffer overflow that can be
  triggered by incoming messages.  There are reports
  about spam that has actually triggered this problem
  and crashed mutt.
- Add SIZEs to distinfo

Submitted by:   Udo Schweigert <udo.schweigert@siemens.com> (maintainer)
PR:             62695

15:28 krion 

- Fix the generation of temporary file names by using mktemp
  instead of PIDs
- Bump PORTREVISION

PR:             ports/62568
Submitted by:   maintainer

03:20 leeym 

- Preserve $PREFIX/etc/mime.types
- Add $PREFIX/etc/mime.types.dist

PR:             62452
Submitted by:   Udo Schweigert <udo.schweigert@siemens.com>

04:36 marcus 

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

13:33 sergei 

- Add CONFLICTS to prevent installation over mutt-devel

PR:             ports/62254
Submitted by:   maintainer

18:12 trevor 

Now gettext 0.12.1 is gettext-old.

15:32 krion 

- Add WITHOUT_NLS knob

PR:             61312
Submitted by:   maintainer