non port: mail/squirrelmail-login_notes-plugin/Makefile |
SVNWeb
|
Number of commits found: 18 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Thu, 28 Aug 2014
|
[ 15:16 adamw ] (Only the first 10 of 31 ports in this commit are shown above. )
Move plugin installation into the plist, rather than post-install, so
that it will work when installed from binary pkg.
Bump PORTREVISION on all plugins for this.
|
Tue, 18 Feb 2014
|
[ 12:40 miwi ] (Only the first 10 of 33 ports in this commit are shown above. )
- Stage support
- While here cleanup some whitespaces / dependencys
|
Thu, 12 Dec 2013
|
[ 01:32 adamw ] (Only the first 10 of 32 ports in this commit are shown above. )
It turns out that letting bsd.squirrelmail.mk define CATEGORIES
broke PKGORIGIN, which is created in bsd.port.pre.mk. Oops.
So, I've added CATEGORIES back to all the plugins, and bumped
PORTREVISION so that packages with correct origins can be
created.
Thanks to: Stefan Bethke <stb@lassitu.de>
|
Sun, 8 Dec 2013
|
[ 18:59 adamw ] (Only the first 10 of 53 ports in this commit are shown above. )
Create a generic PKGMESSAGE, and use it where appropriate.
Make sure that bsd.port.pre.mk is included before bsd.squirrelmail.mk.
For ports with maintainers, I haven't switched you to the new
PKGMESSAGE, but I have corrected paths in pkg-message.in where
necessary. I also got a little over-zealous in cleaning redundant
definitions from the headers. Apologies in advance if this rubs
you the wrong way.
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
Thu, 19 Sep 2013
|
[ 19:36 tabthorpe ]
- Reassign to the heap, I haven't used squirrelmail in a long time
|
Wed, 4 Sep 2013
|
[ 07:19 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
Thu, 27 Jun 2013
|
[ 06:48 bapt ] (Only the first 10 of 25 ports in this commit are shown above. )
CATEGORIES is defined in bsd.squirrelmail.mk which is always loaded after .mk
inclusion leading to PKGORIGIN not being set when needed.
Nothing requires bsd.squirrelmail to be loaded after bsd.port.pre.mk but the
PORTDIR.
Convert "${PORTDIR}/mail" to ${.CURDIR}/.. and remove all the pre.mk/post.mk
dancine
Reported by: erwin
|
Mon, 7 Jun 2010
|
[ 20:33 tabthorpe ]
- Utilise common bsd.squirrelmail.mk
- Add LICENSE
- No PORTREVISION bump, as there is no change in functionality
Requested by: itetcu
|
Tue, 10 Nov 2009
|
[ 19:23 tabthorpe ] (Only the first 10 of 11 ports in this commit are shown above. )
- Use USE_PERL5_RUN instead of USE_PERL5_BUILD
- Move perl dependency before <bsd.port.pre.mk>
- Adopt mail/squirrelmail-login_notes-plugin while I am here
- There is no bump as the same functionality is maintained
Requested by: linimon
Approved by: portmgr (linimon)
|
Sun, 12 Apr 2009
|
[ 15:52 wxs ] (Only the first 10 of 13 ports in this commit are shown above. )
- Reassign maintainer to ports@FreeBSD.org.
PR: ports/133659
Submitted by: Gerrit Beine <gerrit.beine@gmx.de> (maintainer)
|
Mon, 9 Jun 2008
|
[ 13:44 tabthorpe ]
- Update to 1.2
- Utilise bsd.squirrelmail.mk
PR: ports/124268
Submitted by: self
Approved by: Gerrit Beine (maintainer)
|
Fri, 6 Jun 2008
|
[ 13:43 edwin ] (Only the first 10 of 159 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Fri, 8 Sep 2006
|
[ 18:07 itetcu ]
- fix COMMENT
- don't try to remove %%SQUIRRELDIR%%/plugins/login_notes/ if not empty
PR: ports/102994
Submitted by: Gerrit Beine (maintainer)
|
Mon, 20 Mar 2006
|
[ 20:54 pav ]
This plugin allows you to place text and/or images on the top and/or bottom
of the login screen. It also serves as a good introduction to how to write
a simple SquirrelMail plugin.
WWW: http://www.squirrelmail.org
PR: ports/93154
Submitted by: Gerrit Beine <gerrit.beine@gmx.de>
|
Number of commits found: 18 |