all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

audio/opus: bump consumers after update to 1.4

PyQt: Update to latest versions

- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7

PR:		269751
Exp-run by:	antoine

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov

devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine

PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these

Remove # $FreeBSD$ from Makefiles.

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1

PR:		251764
Exp-run by: antoine

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

math/convertall: Update to 0.8.0

Update py-sip to 4.19.21 and qscintilla2 to 2.11.4

  - Update py-sip to 4.19.21
  - Update qscintilla2 to 2.11.4
  - Replace MASTER_SITE_RIVERBANK with https versions
  - Replace QSCI2_DISTNAME to match with the new one

PR:		245308
Approved by:	tcberner (mentor)
Exp-run by:	antoine

Clean up plist

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714

Update to 0.7.5

- Update to 0.7.4
- Desktop file is now included in source

Remove extra occurrence of 'sip'

Update to 0.7.3
Now uses PyQT 5.x

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Allow these ports to build with PACKAGE_BUILDING_FLAVORS set.

Poudriere in particulr did not properly handle DEPENDS_ARGS which
made these ports not properly install dependencies.  That bug
is being addressed along with adding FLAVORS support to it.

With hat:	portmgr
MFH:		2017Q2

Add more PLIST_SUB to Mk/Uses/python.mk

- Add PYTHON_PYOEXTENSION and PYTHON_SUFFIX
- Add PYTHON2 and PYTHON3
- Respect PYTHON_VERSION
- Rename PYOEXTENSION to PYTHON_PYOEXTENSION

This change would help:
- Build databases/postgresql*-plpython with Python 3
  (It has PLIST issue since bsd.python.mk to Uses/python.mk transition)
- Simplify Makefile

PR:		205807
Differential Revision:	https://reviews.FreeBSD.org/D4758
Exp-run by:	antoine

Update to 0.6.1
Convert to USES=pyqt
Add NO_ARCH
Fix plist for Python 3.5

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Bump minimal python3 version to 3.3 in USES

Because we are going to remove python 3.2 from the ports tree

With hat:   python

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Cleanup plist

- Update to 0.6.0
- Convert USE_PYTHON=yes -> USES=python:3.2+ (new version requires 3.x only)
- Take maintainership

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Add stage support

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

Style: tab -> space.

Most contributors copy an existing port when writing their own so reduce the
number of bad examples in the tree.

Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip

Bump PORTREVISION after DESKTOP_ENTRIES update

- Update DESKTOP_ENTRIES:
  * rephrase Comment field or use port ${COMMENT} if appropriate
  * adjust Icon field according to the Desktop Entry Specification
  * update Categories field: remove deprecated category Application;
    set main category, if missing
- Remove indefinite article and/or rephrase COMMENT
- Trim Makefile header
- Other minor changes

Update to version 0.5.2

PR:		ports/172032
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>
Feature safe:	yes

- update png to 1.5.10

Chase PyQT update

-Update to 0.5.1

PR:             158475
Submitted by:   Ports Fury

- Get Rid MD5 support

- Update to 0.5.0

PR:             146306
Submitted by:   Ports Fury

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

The KDE FreeBSD team is proud to announce the release of SIP-4.10 and
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com

We'd like to say thanks to all helpers, testers and submitters.

- Update to 0.4.3

PR:             139768
Submitted by:   Ports Fury

Bump PORTREVISION after QScintilla2 update

- Update to 0.4.2

PR:             124847
Submitted by:   Ports Fury

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.4.1

PR:             121088
Submitted by:   Ports Fury

Chase MASTER_SITES

Submitted by:   pointyhat

- Update to 0.4.0

PR:             118615
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Unmark BROKEN, it's fetchable again.

PR:             111278
Submitted by:   "Josh Paetzel" <josh@tcbug.org>

- Marked broken (Unfetchable)

Submitted by:   pointyhat via krisbot

- Update to 0.3.2

PR:             110344
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Remove USE_REINPLACE from ports starting with M

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

Fix build: USE_PYTHON=2.4+

Noticed by: cluster

Update to 0.3.1

PR:             ports/83858
Submitted by:   Ports Fury

Add missing directory

Don't restrict ports depending on py-qt to python 2.3 anymore.

PyQt doesn't like python 2.4, restrict it and ports depending on it to
python 2.3 for the time being.

Add convertall, a unit converter that can combine the units any way you want.
If you want to convert from inches per decade, that's fine.  Or from
meter-pounds.  Or from cubic nautical miles.  The units don't have to
make sense to anyone else.

PR:             ports/71081
Submitted by:   Michael Johnson <ahze@ahze.net>