Remove misc/zaptel port (superseded by misc/dahdi).

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

- This port conflicts with the upcoming dahdi port.
- Pet portlint (space -> tab).

Feature safe:   yes

- Update to 1.4.11.3.

Feature safe:   yes

- chase devel/newt shlib bump

- Update to 0.5.11 [1]
- sort pkg-plist
- bump PORTREVISION for SHLIB bump

Submitted by:   mi (via e-mail) [1] with minor changes

o Update to 1.4.11.2;

o pass maintainership to fjoe.

Submitted by: fjoe
Feature safe: yes

- devel/libslang2 has completely replaced devel/libslang which has not been
  released in ~5yrs.

- WITH_SLANG2 is now no longer a valid ports knob
- WITH_SLANG implies devel/libslang2 now
- devel/libslang -> devel/libslang2 is a SHARED LIB bump
  so bump PORTREVISION for affected ports

- Take MAINTAINER for most unmaintained ports in this chain
- some SF macro conversions

- BROKEN with devel/libslang2 and DEPRECATE
    math/slsc (abandoned upstream)
- BROKEN with devel/libslang2
    japanese/slirc

PR:             ports/125255
Reviewed by:    garga (libslang maintainer), portmgr (pav)
Exp Run by:     pav

Update to 1.4.11. The port is much less tested and complete as the previous
1.4.6, but we have no choice since new asterisk depends on this version.

Submitted by:   Oleksandr Tymoshenko <gonzo@bluezbox.com>

Allow list of modules to be loaded at startup to be configured via
zaptel_kmod_load rc.conf variable.

PR:             ports/115739
Submitted by:   Adam Jacob Muller <adam@adam.gs>

Fix drifting problem that happens particularly with asterisk's meetme
application. Bump PORTREVISION.

PR:             ports/115059
Submitted by:   Corey Smith <corsmith@gmail.com>

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Fix build on 8-CURRENT

PR:             ports/117879, ports/118061
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>, erwin
Approved by:    maintainer timeout (sobomax; 4 months)

Fix wrong device name in fxotune.c: /dev/zap/N ->
/dev/zap/channelN. Bump PORTREVISION.

Submitted by:   Patrick Gibson <patrick@patrickg.com>

Use destroy_dev_sched() instead of destroy_dev() when __FreeBSD_version >=
700050. The 700050 is not exactly the revision in question (sadly the
__FreeBSD_version has not been bumped), but it is really close and should
be sufficient as a cut-off date for any practical purposes.

Submitted by:   Ian FREISLICH (modulo __FreeBSD_version check)

Fix packing list on i386.

Submitted by:   sat

Build libtonezone.a with -fPIC, which is necessary at least on AMD64
to allow linking it into the loadable module. Bump PORTREVISION.

Update to 1.4.6.

Submitted by:   Oleksandr Tymoshenko

Populate the 'kld' virtual category, for ports that install Kernel Loadable
modules.

Hat:            portmgr

o Update zaptel to 1.4.1;

Submitted by:   Oleksandr Tymoshenko <gonzo@pbxpress.com>

o update libpri to 1.4.0;

PR:             111555
Submitted by:   "Phillip N." <pneumann@gmail.com>

o update asterisk12 to 1.2.7.

Sponsored by:   Sippy Software, Inc. ( http://www.sippysoft.com/ )

The reason it all is going in together is that they are interdependent.

Create symlink ${PREFIX}/include/zaptel -> ${PREFIX}/include to make happy
applications that expect to include <zaptel/zaptel.h> (asterisk 1.4.x).

Catch runaway file.

Update to 1.2.13.

Fix the panic: sleeping without a mutex problem on CURRENT.

PR:             ports/101958
Submitted by:   Anish Mistry

o Update to 1.1.

Sponsored in part by Martin Laflamme (www.marketbridge.com).

o Make sure the module is loaded before asterisk starts.

Add support for Swyx 4xS0 SX2 QuadBri card. Bump PORTREVISION.

Submitted by:   Pim van Stam

Don't forget to run ztcfg.

Convert to rcNG.

PR:             101958
Submitted by:   Anish Mistry

Convert to rcNG.

PR:             101958
Submitted by:   Anish Mistry

Update to 1.0.

Remove USE_REINPLACE from ports starting with M

pre-install -> pre-su-install.

Update MASTER_SITES.

- Update to 0.11
- Add SHA256 hash

PR:             ports/87625
Submitted by:   Jean Milanez Melo <jmelo@freebsdbrasil.com.br>
Approved by:    maintainer timeout (48 days)

Fix speling

PR:             ports/86838
Submitted by:   Riccardo Torrini
Approved by:    maintainer timeout

Fix build in 4.x

PR:             87550
Approved by:    sobomax (maintainer timeout, 15 days)

Call ztcfg after loading drivers to get the card(s) configured properly.

PR:             81697
Submitted by:   Igor Robul <igorr@speechpro.com>

Add LF.net and Luigi Rizo into "thank you" section.

Upgrade to 0.10. Changes:

o T1/E1 on the fly mode switching for wcte11xp/wct4xxp cards.

o Removed define which made TDM cards operate wrong during call
  detection.

o Current version is compatible with 4.x  (thanks to Luigi Rizzo).

o Fixed bug with spurious PCI ID changes by WCTE11XP card.

o Fixed bug with TDM cards Rev.H PCI ids.

Make sure zaptel module loaded first and unloaded last, since all other
modules depend on it. Bump PORTREVISION.

Submitted by:   Ryan J. Taylor <rj@rjt.org>

Forgot to remove that.

Add missed patch.

Forgot to add/remove patches in the previous commit.

Update to the latest snapshot of the driver. This improves existing support
for X100 and TDM400P and adds support for TE410P, TE405P and TE110P.

Also this version include QuadBRI/OctoBRI support.

Sponsored by:   LF.net (quadBRI/octoBRI support), PBXpress Inc. (all the rest)

Improve compatibility with 4.x, particularly:

o Don't use devinfo(8) in startup script, since it doesn't exist on 4.x. Use
  pciinfo(8) instead.

o In zaptel driver don't require a specific major on the 5.x system that
  support auto major numbering;

o Assign specific majors to wcfxs and wcfxo drivers on systems that don't
  support auto major numbering;

o Ensure that nodes are created properly on non-devfs systems.

Enable building on 4.x.

Update to 0.8.

Update to 0.7.

Update to 0.6.

Update to 0.5, which brings in TDM400P support (only fxo is tested right now).
Also features some fixes for existing X100P driver.

Update to 0.4.

Update to 0.3.

Update to 0.2, which includes the following fixes/enhancements:

- Fixed panic when several X100P cards are present in the system;
- added support for pulse dialing.

Committed from:         BSDCan 2004 :)

Add zaptel 0.1, a FreeBSD Driver for Digium X100P Telephony Cards.